Good Deal PicksDeals for the United States
BlogSearch
Product guide

OREI HD12-EX165-K 1x2 HDMI Extender Splitter

Extender Splitter: OREI HD12-EX165-K extends one HDMI source to two displays over CAT6/7 cable, with a local HDMI loop output on the transmitter. Its distance claims vary by resolution, so it suits installations prioritizing a second display and remote source control over higher refresh rates.

At a glance

  • One HDMI source feeds two remote HDMI displays through CAT6/7 cable, and the transmitter also has a local HDMI output.
  • Receiver power is supplied over cable, so the listing says the receivers need no separate adapter.
  • IR commands can travel from the receiver end back to the transmitter to control the HDMI source.
  • Transmitter EDID management is included, and setup is described as plug and play without software.
Price
$110.46Save 15%

Reference price: $129.95

Price checked: Nov 19, 2026

View offerAhead of Black FridayExplore the selection

Often bought together

Pros and cons

Pros

  • Two remote receiver outputs plus a transmitter-side local HDMI output support a multi-display layout.
  • Power over cable reduces the need for separate receiver power adapters.
  • The return-path IR kit can help control a source located away from the viewing area.

Cons

  • The stated 4K mode is limited to 30Hz, while the longer listed distance applies to 1080p at 60Hz.

Technical specifications

12 specifications
Identity
BrandOREI
ModelHD12-EX165-K
Signal and connections
HDMI outputs2
Maximum stated distance at 4K4K@30Hz - Max 165ft
Maximum stated distance at 1080p1080p@60Hz up to 230ft
Other listed resolutions2K@60Hz, 720p
IR frequency range20~60KHz
Power and installation
Power configurationAC adapter
Weight listed2 pounds
Other features
ColorBlack
Connector typeHDMI
Compatible device listedMonitor

What to know before buying

  • The stated reach depends on resolution: the listing gives 165ft for 4K@30Hz and up to 230ft for 1080p@60Hz. Use shielded CAT6 as recommended, and confirm cable and installation requirements for the intended run.

What’s in the box

  • Sender unit, 1Included
  • Receiver units, 2Included
  • User manualIncluded
  • Power adapterIncluded
  • IR kitIncluded
  • Lifetime OREI Tech SupportCheck selected pack
  • 12-month manufacturer's warrantyCheck selected pack

Check which accessories are included in your selected pack before buying.

Who is it for?

A good fit for

  • Home or commercial setups sending one HDMI source to two displays over CAT6/7.
  • Installations where a local display, EDID management, or remote IR source control is useful.
  • Buyers whose 4K needs are compatible with 30Hz, or who can use 1080p at 60Hz for the longer stated run.

Less suited to

  • Users who require 4K output at 60Hz.
  • Installations needing more than two remote receiver displays.
OREI HD12-EX165-K 1x2 HDMI Extender Splitter · photo 2
Additional product photo 2

Customer reviews on Amazon

4.3 / 5 · 107 ratings
  • 5 stars69%69%
  • 4 stars15%15%
  • 3 stars5%5%
  • 2 stars3%3%
  • 1 star8%8%

Customer feedback highlights reported reliability, product quality and image quality, with a mention of good picture and audio synchronization. These impressions are relevant to a splitter intended for extended display runs, but they do not establish that every cable setup will perform alike. Aggregate ratings lean positive while still including a smaller low-star portion, so feedback is not uniformly favorable.

Positive themes

  • Customers report reliability and good product quality.
  • Customers appreciate image quality, including a report of picture and audio synchronization.

Frequently asked questions

How many remote displays can this extender serve?

The listing describes one HDMI input feeding two remote displays through the two receiver units. It also lists a separate HDMI loop output on the transmitter for a local display.

What resolution and distance does it support?

The listing states 4K@30Hz up to 165ft and 1080p@60Hz up to 230ft. It also lists 2K@60Hz and 720p, without giving a separate distance for those modes.

Do the receiver units need their own power adapters?

The listing says power is carried over the cable to the receivers, so they do not need separate adapters. An AC adapter is listed for the system.

Can the source be controlled from a remote display location?

The included IR kit is described as carrying remote-control commands from the receiver end back to the transmitter side.

OREI HD12-EX165-K 1x2 HDMI Extender Splitter · photo 3
Additional product photo 3

Alternative options

Products with discounts that might interest you

4.7
Ceptics WPS-5B World Travel Adapter Kit, 2 USB-A and 2 USB-C
Ceptics WPS-5B World Travel Adapter Kit, 2 USB-A and 2 USB-C

$49.99

$42.49

-15%
-15%
Product details in Markdown