Good Deal PicksDeals for the United States
BlogSearch
Product guide

Elalight HT277P2 4K 1×2 HDMI Extender Splitter

Elalight HT277P2 is a 1-to-2 HDMI extender splitter intended to send one source to two remote displays over CAT6/7 cable. Its listing claims 4K at 30Hz up to 165 ft and 1080p at 60Hz up to 230 ft, with a local HDMI loop output, IR pass-through and EDID management. The advertised modes and reach depend on resolution and cable conditions, so match them to the installation before choosing it.

At a glance

  • Sends one HDMI source to two displays over CAT6/7 cable, with no software or network setup claimed.
  • Listing specifies different maximum cable lengths by video mode: 4K at 30Hz up to 165 ft and 1080p at 60Hz up to 230 ft.
  • Local HDMI loop output is described for monitoring while extending video to remote displays.
  • IR pass-through is described as bi-directional, enabling control of a source device from receiver locations.
  • EDID management is included, and the listing recommends copying the display EDID for audio compatibility.
Price
$93.49Save 15%

Reference price: $109.99

Price checked: Nov 19, 2026

View offerAhead of Black FridayExplore the selection

Pros and cons

Pros

  • Supports a two-display distribution setup over a single CAT6/7 cable, according to the listing.
  • PoC is claimed to power the receivers from the transmitter side, reducing the need for separate receiver power adapters.
  • The listed loop output, IR pass-through and EDID management address local monitoring, remote source control and display negotiation needs.

Cons

  • The stated 4K mode is limited to 30Hz, which may not suit installations that require 4K at higher refresh rates.
  • The longer stated reach applies to 1080p at 60Hz, not the listed 4K mode.

Technical specifications

15 specifications
Identity
BrandElalight
ModelHT277P2
Video and transmission
4K reach and refresh rate4K@30Hz at 165FT (50m) via CAT6/7
1080p reach and refresh rate1080P@60Hz at 230FT (70m) over a single CAT6/7 cable
Maximum transmission bandwidth10.2Gbps
HDMI standardHDMI 1.4
HDCP standardHDCP 1.4
Color depth8-bit color depth
Supported audio formatsDolby TrueHD and Dolby Digital
Connections and compatibility
Connector typeHDMI
Listed compatible devicesBlu-Ray Player, DVR, Gaming Console, Laptop, Personal Computer
Number of ports3
Features and physical details
Signal distributionExtend 1 HDMI Source to 2 Displays | Up to 230ft | IR Control, EDID, HDMI Loop Out | Church/Conference Room/Digital Signage
ColorMatter Black
Power arrangementAdvanced Power over Cable (PoC) technology powers all receivers through CAT cable, requiring only one power adapter at the transmitter

What to know before buying

Listing details to confirm

The listed box inventory conflicts with the feature section: it calls the two receivers “2× HDMI 1×4 Splitter Extender Transmitter,” while the feature section calls them “2× HDMI 1×2 Splitter Extender Receivers.” The title gives a reach of 165 ft, while feature text specifies 165 ft for 4K at 30Hz and up to 230 ft for 1080p at 60Hz. Confirm the selected listing’s receiver configuration and required resolution, refresh rate and cable length before purchase. The stated Dolby audio compatibility is conditioned on copying the display EDID before use.

What’s in the box

  • 1× HDMI Splitter Extender TransmitterIncluded
  • 2× HDMI 1×4 Splitter Extender TransmitterCheck selected pack
  • 2× IR ReceiversIncluded
  • 1× IR EmitterIncluded
  • Power adapterIncluded
  • User manualIncluded

Check which accessories are included in your selected pack before buying.

Who is it for?

A good fit for

  • Churches, conference rooms, classrooms or signage installations that need the same HDMI source distributed to two remote displays.
  • Installations that can use 4K at 30Hz within the stated 165 ft reach, or 1080p at 60Hz within the stated 230 ft reach.
  • Setups where local monitoring, IR source control from receiver locations or transmitter-side PoC would be useful.

Less suited to

  • Buyers who require 4K at 60Hz or another higher refresh rate, which is not listed as supported.
  • Installations that need an unambiguous, confirmed receiver configuration without checking the conflicting kit descriptions.
Elalight HT277P2 4K 1×2 HDMI Extender Splitter · photo 2
Additional product photo 2

Customer reviews on Amazon

4.8 / 5 · 102 ratings
  • 5 stars83%83%
  • 4 stars15%15%
  • 3 stars2%2%
  • 2 stars0%0%
  • 1 star0%0%

The supplied evidence contains aggregate ratings but no customer-comment summary, so it does not establish what buyers liked or disliked or why. The rating distribution is predominantly five-star with some four-star and a small three-star share, but ratings alone cannot confirm performance at the listed resolutions, distances or installation conditions.

Frequently asked questions

What video modes and cable distances does the listing specify?

It claims 4K at 30Hz up to 165 ft over CAT6/7 and 1080p at 60Hz up to 230 ft over a single CAT6/7 cable. The longer distance is specified for 1080p, not 4K.

Does the extender support 4K at 60Hz?

The listing specifies 4K at 30Hz and does not claim support for 4K at 60Hz.

What is included in the box?

The explicit contents list names a transmitter, two receiver units, two IR receivers, an IR emitter, a DC power adapter and a user manual. However, the receiver description conflicts with the feature section, so confirm the selected listing before buying.

Does it need a network connection or separate power at each receiver?

The listing says the distribution setup needs no network configuration and claims PoC powers the receivers through the CAT cable, with one power adapter at the transmitter.

Elalight HT277P2 4K 1×2 HDMI Extender Splitter · photo 3
Additional product photo 3

Alternative options

Products with discounts that might interest you

4.7
Ceptics WPS-5B World Travel Adapter Kit, 2 USB-A and 2 USB-C
Ceptics WPS-5B World Travel Adapter Kit, 2 USB-A and 2 USB-C

$49.99

$42.49

-15%
-15%
Product details in Markdown