1 / 7LOTOS LTP5800D 58A Dual-Voltage Pilot Arc Plasma Cutter
Dual-Voltage: The LOTOS LTP5800D is a 58A plasma cutter with non-touch pilot arc and claimed 120V/240V input flexibility. Its listed clean- and severance-cut capacities are substantial, but the listing conflicts on voltage terminology and some operating details, so verify the configuration before purchase.
At a glance
- Non-touch pilot arc is described for cutting painted, rusty, scaled or mesh surfaces without starting the arc by touching the workpiece.
- The listing claims up to 5/8-inch clean cuts and 3/4-inch severance cuts, with the higher capacity associated with 240V operation in its description.
- A front-mounted air regulator and adjustable pilot-arc and post-flow settings offer practical control over setup and cutting sequence.
Often bought together
Pros and cons
Pros
- Non-touch pilot arc is suited to rough or coated surfaces where direct torch contact is inconvenient.
- The listing provides specific clean-cut and severance capacities and names several compatible metals.
- Front regulator, digital settings and a Type-D air coupler support accessible setup and adjustment.
Technical specifications
17 specifications| Brand | LOTOS Technology |
|---|---|
| Model | LTP5800D |
| Rated output | 58A |
|---|---|
| Clean cut capacity | 5/8" (16 mm) |
| Maximum severance cut | 3/4" (20 mm) |
| Materials named | steel, stainless steel, aluminum, and copper |
| Input voltage | 120V/240V |
|---|---|
| Output range | 15–58A DC |
| Input frequency | 50/60Hz |
| Pilot-arc adjustment | 6-15s |
|---|---|
| Post-flow adjustment | 2-10s |
| Air fitting | NPT 1/4" industry Type-D quick coupler |
| Power plug | NEMA 6-50 plug |
| Torch length | 13ft |
|---|---|
| Ground clamp length | 6ft |
| Weight listed | 18 pounds |
|---|---|
| Package dimensions | 19.4 x 13.6 x 10.9 inches |
What to know before buying
Listing details to confirm
Listing details are inconsistent: the title says 110V/220V, feature copy says 120V/240V, the description associates 3/8-inch clean cuts with 120V and 5/8-inch clean cuts with 240V, and the plug is listed as NEMA 6-50. The description also presents 15–58A DC output and 70 PSI or higher at approximately 4.0 SCFM, while other listing sections omit those operating details. Confirm the selected unit's input, plug, cut capacity by voltage and air requirements before buying. A clean, dry, oil-free air supply is specified in the description.
Who is it for?
A good fit for
- Workshop, automotive or DIY metal cutting where pilot-arc starting across painted, rusty or mesh material is useful.
- Buyers with a suitable air compressor and a verified 240V circuit who want the listing's stated higher cut capacity.
Less suited to
- People who need confirmed 110V/220V compatibility, included 110V conversion hardware or a settled capacity at each input voltage without checking the selected configuration.
- CNC buyers, as the listing directs customers seeking CNC compatibility to other LOTOS models.

Customer reviews on Amazon
- 5 stars
71% 71% - 4 stars
10% 10% - 3 stars
4% 4% - 2 stars
0% 0% - 1 star
15% 15%
Customer feedback describes the cutter as easy to use and reports positive impressions of its operation and perceived value. Durability feedback is mixed, including a report of failure after about three years. These are customer impressions, not performance verification. Buyers should weigh the reported usability against the need to confirm the listed voltage and cutting conditions for their own setup.
Positive themes
- Customers describe it as easy to use and report favorable impressions of its operation and value.
Mixed feedback
- Durability feedback is mixed, with a customer report of failure after about three years.
Frequently asked questions
What cut capacity does the listing claim?
It claims clean cuts up to 5/8 inch (16 mm) and severance cuts up to 3/4 inch (20 mm). The description ties the 5/8-inch clean cut to 240V and gives a 3/8-inch clean-cut figure for 120V, so confirm capacity for your intended supply.
What air supply does it require?
The description specifies clean, dry, oil-free compressed air at 70 PSI or higher and approximately 4.0 SCFM. Verify that your compressor can meet those stated requirements.
What comes with the cutter?
The listing claims a 13-foot torch, a 6-foot ground clamp and cable, a pre-installed air filter-regulator and Type-D plug, and a NEMA 6-50 plug. The description also names starter consumables and a user manual, but the title and feature bullets do not fully confirm the package list.

Alternative options

LOTOS LOP55D 55A Non-Touch Pilot Arc Plasma Cutter 110V/220V | Slices 1/2" cleanly through rusty steel sheets | Adjustable digital post-flow cooling ensures longer nozzle life
$135.98

YESWELDER CUT-55DS PRO 55A Plasma Cutter, Non-HF, 110/220V, IPT40 Torch | Non-Touch Pilot Arc, Large LED Digital Display, Built-In Rear Air Filter, IP21 Rating, Overload and Overheat Protection
$189.98

ARCCAPTAIN 50A Plasma Cutter Machine, 110V/220V Dual Voltage, 2/3" Max Cut | 1/2" Clean Cut, 1/4 NPT Fitting, Large LED Display, 2T/4T, PT Adjustable, Smart Fan, DC Inverter IGBT, For Beginners DIY
$169.99

YESWELDER CUT-65DS PLUS Plasma Cutter, 4-in-1 Non-HF Pilot Arc, 110/220V | Plate Cutting, Grid Cutting, Gouging, and Marking Versatility, ETL Certified, IP21 Rating, Overload and Overheat Protection
$294.48

Bestarc Plasma Cutter Machine, Pilot Arc BTC500 Pro, 50A IGBT 110V/220V | APP Control,1/2" Clean Cut 3/4" Max Cut, Inverter Metal Cutter, 2T/4T Rust Removal, 1/4 NPT Fitting, for Beginners Home DIY
$189.98

YESWELDER 60A Non-HF Plasma Cutter, Non-Torch Pilot Arc, 110/220V | Large Digital Display, Built-In Rear Air Filter, IPT40 Torch, ETL Certified, IP21 Rating, Overload and Overheat Protection
$199.99

Bestarc 60A Pilot Arc Plasma Cutter, 110/220V, LED Display, Air Sensor | Pilot Arc, 1/2" Clean Cut, 4/5" Max Cut, Mesh, Adjustable Post Flow, 2T/4T, Beginner for Rusted, Painted or Dirty Metal
$179.99

LOTOS LTP6300DCNC 63A CNC Plasma Cutter, Non-HF Pilot Arc, 110/220V | Arc OK and Arc Voltage Outputs for External THC, Up to 3/4 in. Clean Cut at 220V for Metal Signs and Custom Parts
$549.98

CUT60 60Amp Non-Touch Pilot Arc PT60 Torch Plasma Cutter 110V/220V Dual Voltage 3 Y...
$699.00

YESWELDER Plasma Cutter 60A, 4-in-1, Non-HF Non-Touch Pilot Arc, 110V/220V | digital control, flexible 2T/4T operation, ETL certified, IP21 rating, overload and overheat protection
$252.69

ARCCAPTAIN iControl CUT55 Pro Plasma Cutter Machine, 55Amp, 120V/240V | APP Control, 1/2" Clean Cut 3/4" Max Cut, Non-Touch Pilot Arc, 1/4 NPT Fitting, Large LED Display, 2T/4T, IGBT for Home DIY
$256.46

ARCCAPTAIN 65A Plasma Cutter Machine, Non-Touch Pilot Arc, 3-in-1 Cut Modes | 1-3/16" Max Cut, Plate/Mesh Cut/Rust Removal, Large LED Screen, P80 Torch, 2T/4T, PA/PT, 110V/220V, For Heavy-Duty Cutting
$446.46

