1 / 7Bestarc BTC500DP PRO 50A Dual-Voltage Plasma Cutter
Dual-Voltage: Bestarc BTC500DP PRO is a 50A plasma cutter listed for 110V or 220V input, with a non-touch pilot arc and app-based remote controls. Its stated cutting capacity changes with input voltage, and operation requires a separate clean, dry compressed-air supply.
At a glance
- Non-touch pilot arc is described for starting cuts on rusty, painted, dirty, or rough metal without torch contact.
- App control is claimed for adjusting current, switching modes, saving settings, and checking diagnostics from up to 98 feet (30 meters) away.
- Voltage-specific recommendations list 10 mm at 110V and 18 mm at 220V, with different current and air-pressure conditions.
- 2T and 4T trigger modes support short cuts or continuous cutting without holding the trigger, respectively.
- Rust-removal mode is described for stripping oxidation, paint, and light contaminants before welding or repair.
Often bought together
Pros and cons
Pros
- Dual-voltage input options can suit workshops with either listed supply, subject to suitable circuits and the stated recommendations.
- Air sensor, status light, and fault-code display are described to help identify air-pressure or operating issues.
- Adjustable pilot-arc time and post-flow are useful for interrupted cuts and torch cooling.
Cons
- Requires a separate compressed-air source, and the listing specifies clean, dry air.
Technical specifications
24 specifications| Brand | bestarc |
|---|---|
| Model | BTC500DP PRO |
| Color | Blue |
| Power configuration | ac |
| Voltage listed | 110220 volts |
| Wattage listed | 11000 watts |
| Rated cutting current claimed | 50A |
|---|---|
| Input options claimed | 110V or 220V |
| Recommended capacity at 110V | 10 mm @ 35A on 110V / 50 PSI |
| Recommended capacity at 220V | 18 mm @ 50A on 220V / 65 PSI |
| Pilot arc time adjustment | 3–15 seconds |
| Operating modes | 2T/4T |
| Recommended air pressure | up to 65 PSI |
|---|---|
| Airflow rate | 250 L/min |
| Air supply requirement | Clean, dry compressed air required. |
| Air compressor | Air compressor not included. |
| App control distance claim | up to 98 feet (30 meters) away |
|---|---|
| Setup time claim | under 60 seconds |
| Circuit breaker recommendation at 110V | up to 60A @ 110V |
| Circuit breaker recommendation at 220V | up to 50A @ 220V |
| Weight listed | 17.11 pounds |
|---|---|
| Package dimensions | 18 x 12.1 x 10 inches |
| Material listed | Plastic Panel, Iron Case, Electronic Circuit Board |
|---|---|
| Warranty description | 2 Year Manufacturer |
What to know before buying
Listing details to confirm
The listing’s technical details are inconsistent: title voltage is 110V/220V while the detail field says “110220 volts,” and listed wattage is 11000 watts. Cutting figures also vary by voltage, current, and air pressure, so treat 20 mm as a maximum claim rather than the recommended capacity for every setup. Confirm the selected configuration and electrical requirements before purchase. The listing also claims ANSI applicable safety standards without identifying a specific certification.
What’s in the box
Included- Plasma cutter with pilot-arc cutting torch
- Built-in regulator
- Air sensor
- App control
- Breathing status light
- Screen
- Mesh-cut and rust-removal modes
Who is it for?
A good fit for
- DIY and repair users who cut conductive metal and have access to an appropriate compressed-air supply.
- Buyers who want remote adjustments or diagnostics through the claimed app control.
- Users who regularly work with mesh, interrupted cuts, or surface rust and can select the stated voltage-specific setup.
Less suited to
- Anyone needing a cutter that includes its own air compressor.
- Buyers who need one unqualified cutting-capacity figure across both input voltages.

Customer reviews on Amazon
- 5 stars
76% 76% - 4 stars
17% 17% - 3 stars
0% 0% - 2 stars
7% 7% - 1 star
0% 0%
The supplied evidence contains aggregate ratings but no customer-comment summary, so it does not establish specific praised features or reported problems. The overall rating distribution leans positive, with some lower ratings. For a purchase where voltage-specific cutting capacity and compressed-air setup matter, ratings alone cannot confirm real-world performance or suitability.
Frequently asked questions
Does this plasma cutter include an air compressor?
No. The listing says the air compressor is not included and calls for clean, dry compressed air.
What cutting thickness does the listing recommend?
It recommends 10 mm at 35A on 110V with 50 PSI, and 18 mm at 50A on 220V with 65 PSI. A separate 20 mm maximum claim is also listed, so do not treat that maximum as the recommended capacity for every setup.
Can the cutter be controlled remotely?
The listing claims Bluetooth app control from up to 98 feet (30 meters) away for current adjustments, mode changes, saved settings, and diagnostics.
What should I verify before buying?
Confirm the selected voltage and circuit requirements, along with the air supply. The detail field’s “110220 volts” and 11000-watt figure do not clearly reconcile with the 110V/220V and 50A claims in the title and feature text.

Alternative options

Bestarc 60A Pilot Arc Plasma Cutter, 110/220V, LED Display, Air Sensor | Pilot Arc, 1/2" Clean Cut, 4/5" Max Cut, Mesh, Adjustable Post Flow, 2T/4T, Beginner for Rusted, Painted or Dirty Metal
$179.99

ARCCAPTAIN 65A Plasma Cutter Machine, Non-Touch Pilot Arc, 3-in-1 Cut Modes | 1-3/16" Max Cut, Plate/Mesh Cut/Rust Removal, Large LED Screen, P80 Torch, 2T/4T, PA/PT, 110V/220V, For Heavy-Duty Cutting
$446.46

ARCCAPTAIN iControl CUT55 Pro Plasma Cutter Machine, 55Amp, 120V/240V | APP Control, 1/2" Clean Cut 3/4" Max Cut, Non-Touch Pilot Arc, 1/4 NPT Fitting, Large LED Display, 2T/4T, IGBT for Home DIY
$256.46

Bestarc 55A Plasma Cutter Machine,Pilot Arc 110/220V Dual Voltage | 5/8" Clean Cut 3/4" Max Cut, Post Flow Mesh Cut, Large LED Display,2T/4T for Beginners DIY
$139.99

LOTOS LTP5800D 58A Non-Touch Pilot Arc Plasma Cutter 110V/220V | Slices 5/8-inch cleanly through rusty steel sheets | Portable inverter features front pressure gauge
$219.98
![Stick Welder, 2026 Newest [Large LED Display] ARC 200Pro Welding Machine 110V/220V ...](/i/983gxxxzJVviMgbnpuK2n2LETKf4N4KsqW1a0KrzCAiDjvt8zuTl7SK0nBNupWKCStPzI6Ixvs2QyZ6yxtH-mu3cY-S15jWnzIl3sQTHtXlgV-crfXBEIjRmGQSMNLlp9SArPaXAd3Q.jpg)
Stick Welder, 2026 Newest [Large LED Display] ARC 200Pro Welding Machine 110V/220V ...
$104.49

Bestarc 145A MIG Welder, Flux Core/Gas MIG Stick Lift TIG Welding, 110/220V | Synergy Control, 4-in-1 Welding, Clear LED, Gas/Gasless Welding, 2T/4T, IGBT Inverter for Beginner DIY, Garage & Workshop
$121.12

YESWELDER 60A Non-HF Plasma Cutter, Non-Torch Pilot Arc, 110/220V | Large Digital Display, Built-In Rear Air Filter, IPT40 Torch, ETL Certified, IP21 Rating, Overload and Overheat Protection
$199.99

YESWELDER CUT-65DS PLUS Plasma Cutter, 4-in-1 Non-HF Pilot Arc, 110/220V | Plate Cutting, Grid Cutting, Gouging, and Marking Versatility, ETL Certified, IP21 Rating, Overload and Overheat Protection
$294.48

YESWELDER CUT-55DS FUSION Plasma Cutter with Built In Air Compressor, 55Amp 110V/220V, Large LED Digital Display Non-High Frequency Non-Touch Pilot Arc Plasma Cutting Machine
$599.99

YESWELDER 55A Non-HF Plasma Cutter, Pilot Arc, 110/220V, Digital Display | 2T/4T Trigger Modes, Built-In Rear Air Filter, ETL Certified, IP21 Rating, Overload and Overheat Protection
$179.99

ANDELI Non-HF Plasma Cutter with Built-In Air Compressor 55A,1" Max Cut | Cut & MMA Capability, Anti-Spatter Helmet, Smart Grid Cutting, 3/4" Clean Cut, Pilot Arc, 110V/220V, Large LED Display
$699.98
