1 / 7ANYCUBIC Photon Mono 4 10K Resin 3D Printer
The ANYCUBIC Photon Mono 4 is a resin 3D printer with a 7-inch 10K mono LCD screen and a stated build volume of 153.4mm x 87mm x 165mm. Its high-resolution display, four-point leveling, and power-loss resume feature suit detailed small-format printing, though customer feedback raises questions about long-term reliability and build-plate removal.
At a glance
- The listing claims a 7-inch 10K mono LCD with 9024x5120 resolution and 17x17μm pixels.
- The stated build volume is 153.4mm x 87mm x 165mm, with a separate listing claim of 2.2L.
- The maker describes a matrix light source intended to provide even illumination and reduce visible layer lines.
- A laser-engraved platform is claimed to support adhesion while allowing print removal.
- The printer is described as resuming a print after power is restored.
- The Anycubic app is not supported for this model.
Reference price: $239.99
Price checked: Nov 19, 2026
View offerAhead of Black FridayExplore the selectionOften bought together
Pros and cons
Pros
- The stated 10K resolution and small pixel size are relevant to buyers prioritizing fine detail in resin prints.
- A 4-point leveling method and power-loss print resumption can simplify setup and limit interruptions, according to the listing.
- The platform design is described as balancing adhesion with easier removal.
Technical specifications
9 specifications| Brand | ANYCUBIC |
|---|---|
| Model | Mono 4 |
| Screen technology listed | LCD |
|---|---|
| Screen resolution | 9024x5120 |
| Screen pixel size | 17x17μm |
| Maximum build volume | 6.04'' x 3.42'' x 6.49''/153.4mm x 87mm x 165mm |
|---|---|
| Maximum print volume | 2.2L (153.4mm*87mm*165mm) |
| Leveling method | 4-point leveling method |
| Material listed | ABS, Aluminum, Polycarbonate |
|---|
What to know before buying
- The maker recommends Photon Workshop and says it supports exporting .pm4n files.
- The listing says initial leveling is needed, even though its feature text says leveling need not be repeated after the first setup.
- Customer feedback reports both strong build-plate adhesion and prints that can stick too much, so removal experience may vary.
- The manufacturer describes the LCD as lasting about 2000 hours of normal use.
Listing details to confirm
Listing dimensions are inconsistent in format, and item weight appears as both 3.5 kg and 7.7 pounds. The stated build volume also appears as both 6.04'' x 3.42'' x 6.49''/153.4mm x 87mm x 165mm and 2.2L (153.4mm*87mm*165mm), while the title claims a 7-inch 10K mono LCD and the technical details list only LCD. Confirm these listing details if they affect your choice.
Who is it for?
A good fit for
- Resin-printing hobbyists who prioritize fine detail in small-format models.
- Beginners looking for a stated four-point leveling approach and a printer that can resume after a power interruption.
- Buyers willing to handle resin printing and check setup, slicing software, and print-removal requirements.
Less suited to
- Those who need app-based control, since the listing says the Anycubic app is unsupported.
- Buyers who require clearly reconciled dimensions or weight before choosing a printer.
- Users seeking reassuring customer feedback on long-term reliability and durability.

Customer reviews on Amazon
- 5 stars
75% 75% - 4 stars
8% 8% - 3 stars
6% 6% - 2 stars
3% 3% - 1 star
8% 8%
Customer feedback highlights detailed print quality and ease of setup and use, which align with the listing's fine-pixel screen and four-point leveling claims. Build-plate adhesion is mixed, with reports of both good grip and prints that are difficult to remove. Reliability and durability concerns are also reported, so buyers planning frequent or long-term use should weigh these experiences alongside the printer's stated specifications.
Positive themes
- Customers praise print detail and overall print quality.
- Customers describe setup and operation as easy.
Negative themes
- Some customers report reliability or durability problems, including failures after a few months or around a year.
Mixed feedback
- Build-plate adhesion is described both as effective and as strong enough to make removal difficult.
- Customer comments on value are mixed.
Frequently asked questions
What is the Photon Mono 4's stated print resolution?
The listing gives a screen resolution of 9024x5120 and pixel size of 17x17μm. The title calls the screen 10K, while the technical details list its technology simply as LCD.
How large can it print?
The listing gives a maximum build volume of 6.04'' x 3.42'' x 6.49''/153.4mm x 87mm x 165mm, and separately states 2.2L (153.4mm*87mm*165mm).
Does it work with the Anycubic app?
No. The listing explicitly says Anycubic APP service is not supported for the Photon Mono 4.
Which slicing software does the listing recommend?
It recommends Photon Workshop and says the software supports exporting .pm4n format.
What do customers report about its reliability?
Feedback includes positive comments on print detail, setup, and ease of use, but also concerns about reliability and durability, including reports of failures after months or around a year. These are customer-reported experiences, not a confirmed lifespan.

Alternative options

ELEGOO Saturn 4 Ultra 16K Resin 3D Printer | 10" 16K Mono LCD and Flip-up Lid, Smart Tank Heating at 30 °C, Large Printing Size of 8.33 × 4.66 × 8.66 Inches
$441.99

ELEGOO Mars 5 Ultra Resin 3D Printer | 7" 9K Mono LCD, Smart Automatic Leveling, Intelligent Detection, Wi-Fi Transfer, Printing Size of 6.04 × 3.06 × 6.49 inch
$284.99

ANYCUBIC Photon P1 Resin 3D Printer with Dual-Color/-Material Printing | Engineering-Grade Resin Compatible, Stability Industrial Ball Screw, Large Build Size 8.78x4.96x9.05in
$499.99

ANYCUBIC 10K Resin 3D Printer, Photon Mono 4 | LCD 3D Printer with 7-inch Mono Screen, Upgraded LighTurbo Matrix & Printing Platform, Printing Size of 6.04''x3.42''x6.49''
$178.49

ELEGOO ABS-Like 3.0+ 3D Printer Resin Clear Red 1000g | Upgraded 3D Printer Photopolymer Resin, Higher Heat-Resistance Fast Curing High Precision Non-Brittle
$13.99

ANYCUBIC Photon Mono M7 Pro 14K Resin 3D Printer, 170mm/h Fast Printing | 10.1'' Mono LCD with COB LighTurbo 3.0 Source, Dynamic Heating Function, Build Volume 8.77''x4.96''x9.05''
$449.99

ELEGOO ABS-Like 3.0 3D Printer Resin Clear Red 1000g | High Strength and Toughness, High Precision, Low Viscosity, UV-Curing Photopolymer Resina for MSLA DLP LCD 3D Printers
$12.59

ANYCUBIC Photon Mono M7 MAX Resin 3D Printer, 13.6’’ 7K Large Resin Printer | with COB LighTurbo 3.0, Dynamic Heating, Flip-Open Cover Design, Print Size 11.8'' x 11.7'' x 6.5''
$649.99

ANYCUBIC Wash & Cure Max 3.0, 15.1L Ultra-Large Washing Volume | Detergent Saving 50%, Customizable Wash & Cure Process, Compatible with Photon Mono Series/Saturn Series Resin 3D Printer
$349.99

ANYCUBIC Photon P1 14K Resin 3D Printer with Auto-Leveling | Stability Ball Screw, 14K Precision & LighTurbo 4.0, 8000cps Resin Compatible, Large Build Size 8.78x4.96x9.05in
$499.99

ANYCUBIC ABS-Like Resin Pro 2 Bundle, Upgraded 8K 3D Printer Resin with Enhanced Strength and Toughness, Wide Compatibility for All LCD Resin 3D Printers (4Packs*1kg Grey, 4kg in Total)
$50.34

SUNLU 3D Printer Resin, 1kg Fast Curing Standard 3D Resin for LCD DLP SLA Printers, 395-405nm UV Light Curing Photopolymer Resin, Low Shrinkage, High Precision, 1000g, Grey
$10.39
























