1 / 7ANYCUBIC Photon Mono 4 10K Resin 3D Printer
The ANYCUBIC Photon Mono 4 is a resin 3D printer with a listed 10K monochrome LCD and a 153.4 x 87 x 165 mm build volume. Its advertised fine pixel spacing and recovery after power is restored may suit detailed small models, but customer feedback also flags print reliability and screen durability concerns.
At a glance
- A 7-inch, 10K mono LCD is listed with a resolution of 9024x5120 and 17x17um pixel spacing.
- The advertised build volume is 153.4 mm x 87 mm x 165 mm, suitable for models within those dimensions.
- The listing describes a matrix light source and claims single-layer exposure times of 1.5s.
- Print resume after power is restored is claimed, which may reduce lost work after an outage.
Reference price: $209.99
Price checked: Nov 19, 2026
View offerAhead of Black FridayExplore the selectionOften bought together

ANYCUBIC Wash and Cure Station 3.0, Washing Size 165 x 100 x 180 mm | Post-Process for Most LCD/SLA/MSLA/DLP Resin 3D Printer, Detergent Saving & Dual Cleaning and Curing Models
$85.49

ANYCUBIC 3D Printer Resin Bundle, 405nm SLA UV-Curing Resin with High Precision and Quick Curing & Excellent Fluidity for LCD 3D Printing (4Packs*1kg Grey, 4kg in Total)
$69.98
Pros and cons
Pros
- The listed 10K LCD resolution and 17x17um pixel size provide concrete detail specifications for buyers comparing small resin prints.
- The advertised build volume and power-restoration resume function offer practical capacity and recovery features.
Technical specifications
9 specifications| Brand | ANYCUBIC |
|---|---|
| Model | Photon Mono 4 |
| Screen technology listed | LCD |
|---|---|
| LCD resolution | 9024x5120 |
| Screen size | 7'' |
| Pixel size | 17x17um |
| Build volume | 153.4 mm x 87 mm x 165 mm / 6.04'' x 3.42'' x 6.49'' |
|---|---|
| Single-layer exposure time claimed | 1.5s |
| Material listed | ABS, Aluminum, Polycarbonate |
|---|
What to know before buying
Listing details to confirm
Listing dimensions and weight are inconsistent: dimensions appear as both 20"D x 10"W x 15"H and 20 x 10 x 15 inches, while weight appears as both 5 kg and 11 pounds. The listing also claims pre-shipment assembly, calibration and testing but says users should level the printer before printing. Treat these details as unresolved listing discrepancies, not established product defects.
Who is it for?
A good fit for
- Buyers making detailed miniatures or other small resin models who want a stated 10K LCD and defined build volume.
- Users prepared to level the build platform and set resin exposure parameters, especially with third-party resins.
Less suited to
- Buyers who need a confirmed printer footprint or weight before planning a workspace, since listing entries conflict.
- Buyers who prioritize confidence in long-term LCD durability or consistently trouble-free operation, given reported screen-breakage concerns and mixed reports of print failures.

Customer reviews on Amazon
- 5 stars
72% 72% - 4 stars
12% 12% - 3 stars
6% 6% - 2 stars
1% 1% - 1 star
9% 9%
Customer feedback praises print quality, speed and simple setup, while reports about functionality, ease of use and adhesion are mixed. Some customers describe frequent failed prints, and the feedback also raises LCD durability concerns, including reports of screens breaking after two months. These experiences matter for a resin printer whose listed LCD is central to printing, but they do not establish how often failures occur or predict an individual unit's performance.
Positive themes
- Customer feedback praises print quality, print speed and straightforward setup.
Negative themes
- The feedback includes reports of LCD screens breaking after two months.
Mixed feedback
- Customers differ on functionality and ease of use, with reports ranging from smooth operation to frequent failed prints.
- Adhesion receives mixed feedback.
Frequently asked questions
What is the Photon Mono 4's stated build volume?
The listing gives 153.4 mm x 87 mm x 165 mm, also shown as 6.04'' x 3.42'' x 6.49''.
Which resins are listed as compatible?
The product information lists standard, water-washable and tough resins, and recommends viscosity below 2000cps. For third-party resins, it says exposure parameters need to be tested and adjusted.
Does the printer resume a job after a power outage?
The listing claims it can resume printing once power is restored after a sudden outage.
What should buyers know about reported reliability?
Customer feedback includes both praise for print quality and setup and reports of frequent failed prints and LCD screen breakage. Those reports are customer experiences, not a verified failure rate.

Alternative options

ANYCUBIC Photon Mono 4 Ultra 10K Resin 3D Printer, 7'' HD Mono Screen | COB Light Source, 120mm/h Fast Printing, Intelligent Detection, 6.04''x3.42''x 6.49'' Printing Size
$265.99

ELEGOO Mars 5 Ultra Resin 3D Printer | 7" 9K Mono LCD, Smart Automatic Leveling, Intelligent Detection, Wi-Fi Transfer, Printing Size of 6.04 × 3.06 × 6.49 inch
$284.99

ANYCUBIC Wash and Cure 3 Plus Station for LCD/SLA/DLP 3D Printer | Size-Upgrade Wash Cure Machine with Gooseneck Lights, Dual-Layer Design and IPA Saving, for Photon Mono Series/Saturn Series
$142.49

ANYCUBIC Wash and Cure Machine 3.0 with Twistable Gooseneck Light | 2 in 1 UV Washing and Curing Station for ANYCUBIC Photon Mono 4/Mono 4 Ultra/Mars Series LCD/DLP/SLA 3D Printer Models
$85.49

ANYCUBIC Photon Mono M7 Pro 14K Resin 3D Printer, 170mm/h Fast Printing | 10.1'' Mono LCD with COB LighTurbo 3.0 Source, Dynamic Heating Function, Build Volume 8.77''x4.96''x9.05''
$449.99

ELEGOO ABS-Like 3.0+ 3D Printer Resin Grey 1000g | Upgraded 3D Printer Photopolymer Resin, Higher Heat-Resistance Fast Curing High Precision Non-Brittle
$15.99

ANYCUBIC ABS-Like Resin Pro 2 Bundle, Upgraded 8K 3D Printer Resin with Enhanced Strength and Toughness, Wide Compatibility for All LCD Resin 3D Printers (4Packs*1kg Grey, 4kg in Total)
$50.34

ANYCUBIC Wash and Cure 3 with Gooseneck Lights | Upgraded Volume 2 in 1 Wash and Cure Station for Photon Mono 4/4 Ultra/Mars Series, Washing Size of 165 x 100 x 180 mm
$85.49

ELEGOO Standard 3D Printer Resin Grey 1000g | 405 nm LCD UV-Curing Photopolymer Resina for Mars Saturn Jupiter MSLA DLP LCD 3D Printing
$15.99

SUNLU 3D Printer Resin, 1kg Fast Curing Standard 3D Resin for LCD DLP SLA Printers, 395-405nm UV Light Curing Photopolymer Resin, Low Shrinkage, High Precision, 1000g, Grey
$10.39

ANYCUBIC 3D Printer Filament PLA Bundle 2KG, Texture Grey | Dimensional Accuracy +/- 0.02mm, 3D Printing PLA Filament, Reusable Spool, Fits for Most FDM 3D Printers
$20.50

ANYCUBIC PLA Filament Refill 1.75mm, 1KG, Black | 3D Printer Filament, for Reusable Spools, Dimensional Accuracy +/- 0.02mm, Fit with Most Reusable Spools & FDM 3D Printers
$10.19
Products with discounts that might interest you
Offer details
- The listing recommends Photon Workshop and says third-party resin exposure settings may need adjustment.
- The listing describes a one-year warranty, a six-month LCD screen warranty, and excludes films and the tool kit. Warranty terms are listing claims, confirm applicable coverage before purchase.























