Good Deal PicksDeals for the United States
BlogSearch
Product guide

WEP 948DQ-I Solder Fume Extractor with Double Filtering

Double Filtering: The WEP 948DQ-I is a compact solder fume extractor with front-and-rear filtration, an adjustable tilt angle, side fenders, and helping hands. Its small footprint and bundled holding tool suit bench soldering, while customer feedback is mixed on airflow and noise, so it may not meet every buyer’s expectations for extraction strength.

At a glance

  • Filtration adsorbers are positioned at both the front and rear, according to the listing.
  • The tilt angle can be adjusted to direct coverage toward the soldering area.
  • Side fenders are intended to reduce disruption from surrounding airflow.
  • Helping hands are listed for holding small components, wires, and circuit boards.
  • A built-in switch controls the extractor.
Price
$30.39Save 39%

Reference price: $49.99

Price checked: Nov 19, 2026

View offer

Often bought together

Pros and cons

Pros

  • Small listed dimensions can suit a crowded soldering bench.
  • The helping hands provide a place to hold small workpieces while soldering.
  • Six filtration adsorbers are listed in the package, with three assigned to each side in the product information.

Cons

  • Customer feedback reports mixed impressions of airflow and noise, including comments that extraction can feel weak or somewhat noisy.

Technical specifications

10 specifications
Identity
BrandWEP
ModelWEP 948DQ-I
Electrical
Voltage110 volts
Rated voltage range110V-127V/AC, 60Hz
Wattage5 watts
Dimensions and installation
Dimensions listed6.5"D x 3.5"W x 6.5"H
Main unit dimensionsL3.54*W5.71*H6.46in ±0.2in
Airflow and operating conditions
Air volumeapproximately 2.7m³/min
Operating ambient temperature0~40°C/32~104°F
Design and included functions
Number of channels1

What to know before buying

Listing details to confirm

The listing gives conflicting size descriptions: 6.5"D x 3.5"W x 6.5"H in product details versus 3.5 x 5.7 x 6.5 inches in a feature claim and L3.54*W5.71*H6.46in ±0.2in in specifications. Voltage is also described as 110 volts and 110-127V/AC, 60Hz, while a safety note says not to connect it to a 220V socket. Check the actual dimensions and supply compatibility for your setup. The stated air volume and manufacturer extraction claims are not independently verified.

What’s in the box

Included
  • WEP 948DQ-I fume extractor
  • Helping hands
  • 6 filtration adsorbers

Who is it for?

A good fit for

  • Soldering hobbyists who want a compact desktop extractor with adjustable positioning.
  • People who can make use of an included helping-hands tool for small soldering work.

Less suited to

  • Buyers who need proven extraction performance or consistently quiet operation, since customer feedback is mixed on airflow and noise.
  • Users whose power supply is not compatible with the listing’s stated 110-127V USA specification.
WEP 948DQ-I Solder Fume Extractor with Double Filtering · photo 2
Additional product photo 2

Customer reviews on Amazon

4.4 / 5 · 115 ratings
  • 5 stars70%70%
  • 4 stars15%15%
  • 3 stars7%7%
  • 2 stars4%4%
  • 1 star4%4%

Customer feedback highlights appreciation for the compact size and reports that the station works well for some soldering tasks. Impressions of the extractor are mixed, with some describing it as solid and not very loud while others report weak airflow or noticeable noise. For buyers considering this small, 5-watt unit, those comments make extraction strength and sound important to weigh against its compact footprint and adjustable design.

Positive themes

  • Customers mention the compact size and report that the station works well for some soldering tasks.

Mixed feedback

  • Feedback on airflow and noise is mixed, with reports ranging from solid and not very loud to weak and somewhat noisy.

Frequently asked questions

What is included with the WEP 948DQ-I?

The listed contents are one WEP 948DQ-I fume extractor, one helping-hands tool, and six filtration adsorbers. The product information describes three adsorbers for the front and three for the rear.

Can the extractor angle be adjusted?

Yes. The listing describes an adjustable tilt angle to direct coverage toward the soldering area.

What power supply does it require?

The details list 110 volts, and the specification text gives a range of 110V-127V/AC, 60Hz. The listing cautions against connecting it to a 220V socket, so check compatibility with your outlet.

Is the extractor quiet and strong?

Customer feedback is mixed. Some describe it as solid and not especially loud, while others say airflow feels weak or the unit is somewhat noisy.

WEP 948DQ-I Solder Fume Extractor with Double Filtering · photo 3
Additional product photo 3

Alternative options

Product details in Markdown