Good Deal PicksDeals for the United States
BlogSearch
Product guide

WEP 948D-I 110W Desoldering Station

The WEP 948D-I is a 110W temperature-controlled desoldering station with three temperature presets and a tiltable LCD. Its powered desoldering gun is aimed at frequent through-hole and multilayer PCB work, but the listing specifically says it is not suitable for graphics card motherboards.

At a glance

  • Three stored temperature settings are intended for quick switching between common tasks.
  • The tiltable LCD displays operating information, and the interface supports °C/°F conversion.
  • Sleep timing can be set from 0–120 minutes or deactivated, followed by an automatic heating-element power cutoff after 30 minutes in sleep mode.
  • Four replacement nozzle sizes are listed: 0.8mm, 1.0mm, 1.2mm and 2.0mm.
Price
$122.54Save 21%

Reference price: $154.99

Price checked: Nov 19, 2026

View offer

Often bought together

Pros and cons

Pros

  • A detachable powered desoldering gun can leave one hand free compared with a separate iron-and-pump setup.
  • The four listed nozzle sizes and included cleaning and filtration parts provide maintenance options for varied through-hole work.
  • Three temperature presets, a tiltable display and configurable sleep timing support repeat tasks and bench use.

Cons

  • The listing says the station is not suitable for graphics card motherboards.
  • The stated temperature range starts at 716°F, which may not suit work requiring lower-temperature settings.

Technical specifications

11 specifications
Identity and display
BrandWEP
ModelWEP 948D-I
Display technologyLCD
Power and temperature
Rated power110 watts
Voltage listed in details110 volts
Temperature range380-480°C/716-896°F
Preset channels3
Vacuum pressure0.05 Mpa
Size and operating conditions
Weight6.8 pounds
Main unit dimensionsL8.66×W4.72×H6.14in ±0.2in
Operating ambient temperature0~40°C/32~104°F

What to know before buying

Listing details to confirm

Listing details are inconsistent about input voltage: the specifications list 110V-240V~, 50-60Hz, while product details and the operating note say 110 volts and 110-127V USA specifications, and warn not to connect it to a 220V socket. Confirm the voltage for the selected unit before use.

What’s in the box

Included
  • WEP 948D-I desoldering station
  • 4 replacement desoldering nozzles, 0.8mm, 1.0mm, 1.2mm and 2.0mm
  • Detachable desoldering gun
  • Desoldering gun holder
  • 1 heat-resistant silicone pad
  • Cleaning pins, one set
  • 10 filtration adsorbers
  • 5 ceramic filters
  • 1 vacuum receptacle cover
  • 1 solder residue storage chamber
  • 2 solder residue filter springs
  • 2 retainers

Who is it for?

A good fit for

  • People doing frequent through-hole or multilayer PCB desoldering, including the listed computer motherboard and ham-radio board applications.
  • Electronics repairers or component recyclers who want an integrated suction gun rather than holding a separate pump.
  • Bench users who regularly switch between up to three temperature settings.

Less suited to

  • Graphics card motherboard work, which the listing explicitly excludes.
  • Buyers who need a combined soldering and desoldering station, since the supported configuration is a desoldering station.
  • Users whose work requires temperatures below 716°F.
WEP 948D-I 110W Desoldering Station · photo 2
Additional product photo 2

Customer reviews on Amazon

4.2 / 5 · 103 ratings
  • 5 stars69%69%
  • 4 stars9%9%
  • 3 stars6%6%
  • 2 stars8%8%
  • 1 star8%8%

Customer feedback reports ease of use and perceived value, with some describing desoldering as fast, while others say solder is not always fully cleared. Quality-control experiences are also mixed. That variability matters for a station intended for frequent PCB work, where the listed 110W output and nozzle choices do not guarantee complete solder removal on every joint.

Positive themes

  • Customers describe the station as easy to use and report positive performance and value.

Mixed feedback

  • Desoldering feedback is mixed, with reports of fast, easy operation alongside difficulty clearing all solder.
  • Quality-control feedback is mixed, with some positive assessments and some concerns.

Frequently asked questions

What temperature range is listed for the WEP 948D-I?

The listed range is 380-480°C/716-896°F. The stated lower limit is relatively high, so check that it suits the components and work involved.

How many preset channels does it have?

The listing specifies three stored temperature channels for switching between saved settings.

Which voltage should I expect?

The listing conflicts: one specification says 110V-240V~, 50-60Hz, while other details say 110 volts and 110-127V USA specifications and warn against connecting it to a 220V socket. Confirm the selected unit's input rating before powering it.

Is it intended for graphics card motherboard repairs?

No. The listing explicitly says this station is not suitable for graphics card motherboards.

WEP 948D-I 110W Desoldering Station · photo 3
Additional product photo 3

Alternative options

Product details in Markdown