1 / 7VEVOR Hydraulic Gear Puller, 15-Ton Capacity
VEVOR Hydraulic Gear Puller is a hydraulic puller listed with a 15-ton capacity, convertible two- or three-jaw setup, and horizontal or vertical operation. Its long reach and substantial weight make fit and handling important considerations before purchase.
At a glance
- Switch between two jaws, described for small bearings and gears, and three jaws for larger components.
- Hydraulic operation is listed for horizontal and vertical pulling.
- The listing gives a maximum stroke of 2.2 inches / 55 mm and maximum pulling size of 12"/ 304.8 mm.
Often bought together
Pros and cons
Pros
- Two- or three-jaw conversion provides different gripping arrangements for different component sizes.
- Horizontal and vertical operation can suit components approached from different directions.
- Customer feedback describes the tool as effective and well built, with some noting ease of use.
Cons
- At 25 pounds, it may be cumbersome to carry or position for some users.
Technical specifications
11 specifications| Brand | VEVOR |
|---|---|
| Model | Hydraulic Gear Puller |
| Dimensions listed | 18.54 x 3.43 x 8.86 inches |
|---|---|
| Weight listed | 25 pounds |
| Maximum pulling capacity | 15T |
|---|---|
| Maximum pulling size | 12"/ 304.8 mm |
| Maximum stroke | 2.2 inches / 55 mm |
| Jaw configuration | two-jaw or three-jaw |
|---|---|
| Operating orientations | horizontal and vertical |
| Material | industrial-grade steel |
|---|---|
| Surface treatment | rust and corrosion-resistant coating |
What to know before buying
- The two-jaw arrangement is described for smaller bearings and gears, with the listing advising that its claws be installed diagonally for stability. The three-jaw arrangement is presented for larger, heavier components. Confirm the component dimensions and pulling setup suit the tool before use.
What’s in the box
- CaseCheck selected pack
Check which accessories are included in your selected pack before buying.
Who is it for?
A good fit for
- Mechanics and maintenance users removing gears, bearings, pulleys, flywheels, or hubs within the listed capacity and size range.
- Buyers who need to reposition a hydraulic puller for horizontal or vertical work.
- Users who can manage a 25-pound tool and want two- and three-jaw configurations.
Less suited to
- Buyers needing a lightweight hand tool or a puller for components outside the listed capacity or maximum pulling size.

Customer reviews on Amazon
- 5 stars
78% 78% - 4 stars
10% 10% - 3 stars
6% 6% - 2 stars
3% 3% - 1 star
3% 3%
Customer feedback describes the puller as effective, sturdy, and easy to use, including a report of removing a flywheel. The listing's 15T capacity, jaw options, and substantial 25-pound weight help frame those reports, but ratings and customer comments do not establish performance for every component or setup. Feedback also describes it as large, and some customers find it heavy, which matters when positioning it in confined spaces or carrying it.
Positive themes
- Customers report effective pulling and appreciate the heavy-duty construction and quality.
- Some customers describe it as easy to use.
Negative themes
- Some customers find the tool very heavy.
Mixed feedback
- Feedback describes the puller as large, while opinions on its weight vary.
Frequently asked questions
What is the listed pulling capacity?
The listing gives a maximum capacity of 15T. It also states a maximum pulling size of 12"/ 304.8 mm.
Can it be used with two jaws or three jaws?
Yes. The listing describes switching between two- and three-jaw configurations. It presents two jaws for smaller bearings and gears and three jaws for larger components.
Can it pull horizontally and vertically?
The listing claims both horizontal and vertical operation and says an extended handle is included.
How much does the puller weigh?
The listed item weight is 25 pounds, so positioning and carrying it may take effort.

Alternative options

OTC 4532 7-Ton Multi-Purpose Bearing and Puller Set with Storage Case | Includes "H" Bar Style Puller Block (7" to 11" Spread), Two Sets of Jaws (5" to 9" Reach), Two Forcing Screws (Short & Long)
$214.23

12-Way Slide Hammer Puller Set | Auto Repair Kit for Hub, Bearing, Gear & Axle Extr...
$84.99

DAYUAN 46Pcs Harmonic Balancer Puller Set, Flywheel Steering Wheel Puller | Gear Puller Yoke Crankshaft Pulley Puller,30 Bolts,Heat-Treated Alloy Steel Yoke,Floating Swivel,For 2 & 3-Hole Applications
$18.80

OEMTOOLS 24538 Heavy Duty U Joint Puller for Semi Trucks - Class 7-8 | U Joint Removal Tool for Drivelines, U Joint Press Removes Seized Bearing Cups, Use with 1" Drive Impact
$70.54

2-in-1 Blind Hole Bearing Puller & Bushing Press Kit | 49-Disc Driver Set with Slide Hammer Puller, Fits 6–59 mm Bearings & 18–65 mm Bushings for Cars, ATVs & Light Trucks
$80.74

Seal Puller with 30% Thicker Dual Hook Tips and Heat-Treated Steel | Premium Oil Se...
$5.93

OTC 4518 5-Ton Bar-Type Puller and Bearing Separator Set with Storage Case | Includes 2" and 3" Bearing Splitters, Four Sets of Hex Push-Puller Legs, Bar-Type Puller Head with 9/16" Forcing Screw
$136.69

OMT 3" 4" 6" Gear Puller Set, 3 Jaw Puller with Reversible Jaws | 3pc Bearing Puller Pulley Puller Tool Kit for Pulley Gear Bearing Flywheel Removal, Silver
$24.64

Wheel Hub Removal Tool & Wheel Bearing Removal Tool Kit | Wheel Bearing Puller, Hub...
$47.92

VEVOR Hydraulic Gear Puller, 15 Ton Max. Capacity Hydraulic Puller, 2 or 3 Jaws Bearing Hub Separator, 3.9"- 11.8" Hydraulic Puller Separator Tool for Pulling Hubs, Flanges, Gears, Bearings
$78.90

maXpeedingrods 20T Hydraulic Gear Puller Wheel Bearing Puller Kit | 2 or 3 Jaws Puller, Bearing Hub Separator, Heavy Duty Hydraulic Puller Separator Tool
$155.99

VEVOR Carrier & Pinion Bearing Puller with 3 Clamshells Pinion Puller Tool | For Auto Repair, Compatible with Dana 30,40,50,60,70, 80, Ford 10.25" Bearings, 45# Steel, with Center Bolt, Handy Stand
$113.91
