1 / 7TURBRO B100V Beluga Inverter Pool Heat Pump, 95,563 BTU
The TURBRO B100V Beluga inverter pool heat pump is listed for pools up to 26,000 gallons, with heating and cooling, Wi-Fi control, and a stated output of 95,563 BTU. Its professional-installation requirement and multi-day warm-up expectations make it a better fit for planned pool temperature management than quick heating.
At a glance
- The listing describes both heating and cooling, with a four-way valve for switching between modes.
- The manufacturer lists a titanium heat exchanger as corrosion-resistant and compatible with saltwater pools, subject to correct plumbing setup.
- A full DC inverter compressor is described as adjusting power to maintain water temperature.
- Wi-Fi control and programmable timer functions are listed.
Pros and cons
Pros
- Heating and cooling modes support seasonal temperature management rather than heating alone.
- The stated capacity and pool dimensions help buyers compare the unit with larger residential or commercial pools.
- The listing provides explicit set-temperature and outdoor-temperature ranges.
- The titanium exchanger is described as suitable for saltwater pools when installed upstream with a check valve between it and the pool.
Cons
- Professional installation is required, including certified-electrician hardwiring to 220-240V for this model.
- The 229-pound listed weight and pallet shipment imply substantial delivery and installation logistics.
- The manufacturer says reaching the target temperature can take several days, not an immediate warm-up.
Technical specifications
19 specifications| Brand | TURBRO |
|---|---|
| Model | B100V |
| Listed heat output | 95,563 BTU |
|---|---|
| Pool capacity | Up to 26,000 gallons |
| Maximum pool dimensions | 32’ round or 20’x40’ rectangular |
| Settable water temperature | 47-104°F |
| Listed ambient outdoor temperature range | 5-109°F |
| Coefficient of performance | up to 15.8 |
| Operation | Heating and cooling |
|---|---|
| Control | smart WiFi control |
| Compressor | full DC inverter compressor |
| Heat exchanger | titanium heat exchanger |
| Timer | programmable timer functions |
| Weight listed | 229 pounds |
|---|---|
| Package dimensions | 47.5 x 30.5 x 22.5 inches |
| Electrical installation | hardwired to 220-240V by a certified electrician |
| Installation requirement | professional installation |
| Heat pump coverage | 2 years |
|---|---|
| Compressor coverage | 5 years |
What to know before buying
- Listing claims for COP and energy savings are manufacturer figures, not independently verified performance results. The claimed 95,563 BTU output, up-to-26,000-gallon capacity, 47-104°F set range, and 5-109°F ambient range do not specify the conditions for each rating, so confirm suitability for your climate and pool. Allow the unit to sit upright for over 24 hours before use. Use a pool cover and wind barriers to help retain heat. Condensate can be produced during operation, so provide drainage and prevent water from pooling. The manufacturer advises against inflatable pools due to low water pressure. Saltwater installation requires the pump to be upstream of the pool and a check valve between them.
Who is it for?
A good fit for
- Owners of larger pools within the listed capacity and dimension limits who want both heating and cooling.
- Buyers planning a professionally installed, hardwired pool heat pump with Wi-Fi and timer control.
- Saltwater-pool owners able to follow the stated plumbing arrangement.
Less suited to
- Inflatable-pool owners, which the manufacturer does not recommend this model for.
- Buyers who need rapid heating or cannot accommodate a large, heavy unit and professional electrical installation.

Frequently asked questions
What pool size is the TURBRO B100V listed for?
The listing says up to 26,000 gallons and gives maximum dimensions of 32 feet round or 20 by 40 feet rectangular. Actual suitability can depend on climate, pool volume, insulation, wind exposure, installation, and maintenance.
Does this heat pump require a special electrical installation?
Yes. The listing says the B100V must be hardwired to 220-240V by a certified electrician and requires professional installation.
Can it be used with a saltwater pool?
The manufacturer says the titanium heat exchanger is corrosion-resistant and compatible with saltwater pools. It also specifies installation upstream of the pool, with a check valve between the pump and pool.
How quickly does it heat pool water?
The manufacturer cautions that reaching the selected temperature may take several days. Ambient temperature, water volume, insulation, wind, installation, and maintenance can affect the time.
Can the B100V cool as well as heat?
The listing describes heating and cooling and says a four-way valve switches between the modes.

Alternative options

10000 Gallons Swimming Pool Heater for Above Ground and Inground Pool | 40000 BTU I...
$999.00

POOLTOHOT Pool Heater for Above Ground Pools & Inground Pools, 9000 Gal | 110V Electric Pool Heater, Built‑in Japanese Compressor, Heating & Cooling, Pool Heat Pump with Smart WiFi Control
$1,296.00

Swimming Pool Heater Electric Pool Heat Pump 9000 Gallons | 35000BTU, 12COP High En...
$1,234.05

Swimming Pool Heat Pump Inverter 42,000BTU | for Above Ground and Inground Pool WiF...
$1,099.99

120,000 Btu Inverter Pool Heat Pump For Inground Pools 220V | 33000 Gallon Electric...
$3,299.99

NATURAQUELL Swimming Pool Heat Pump, 18,000 BTU, 5,200 Gal | 110-120V Electric Pool Heater, COP 4.1, Energy Save 45%, WiFi Control, Titanium Exchanger, for Above Ground Pools
$599.99

Varpoolfaye 5,500 Gallon Heat Pump Pool Heater For Above Ground Pool 110v | Plus 16,000 BTU Swimming Electric Pool Heat pump High COP 4.3, 50dB, Energy Save 43% WiFi Control
$644.90

Swimming Pool Heater Electric Pool Heat Pump 5000 Gallons | 16000BTU, 5.5 COP High ...
$569.05

Swimming Pool Heater for Above Ground and Inground Pool 12'*14'*48" | 16000BTU Pool Heat Pump, 5.5 COP High Energy Efficient, Up to 5000 Gallons, Smart Heating & Cooling 110V
$569.05