1 / 7Torqy Solutions Auto Start-Stop Eliminator for Ford F-150 2021–2026
Torqy Solutions’ Auto Start-Stop Eliminator for Ford F-150 is a plug-in memory module intended to leave the truck’s automatic start-stop system off after each engine start. It is listed for gasoline 2021–2026 F-150 models, not PowerBoost hybrids or Lightning EVs.
At a glance
- Designed to set start-stop to OFF automatically at engine start, avoiding a repeat button press.
- The listing specifies connection to the factory gateway module behind the glove box, with no coding or wire cutting.
- Manufacturer claims low draw in Sleep Mode and says remote start is not affected.
Often bought together

Husky Liners Wheel Well Rear Guards for 2021-2026 Ford F-150 NO Raptor | Fits 2021-2026 Ford F-150, No Raptor or Models with Continuously Controlled Damping, 79161 | Wheel Well Rear Guards, 2 pc.
$129.99

BuiltRight Industries Rear Seat Release for 2009–2025 Ford F-150, F-250, F-350, F-450 & Raptor – SuperCab & SuperCrew - The Original, Made in USA
$37.00
Pros and cons
Pros
- Automatic off-state memory targets drivers who otherwise press the start-stop button each trip.
- Plug-in connection is described as requiring no coding or wire cutting and leaves the OBDII port available.
- Customer feedback reports straightforward installation and effective start-stop disabling.
Cons
- Fitment is limited to standard gasoline F-150 models and excludes PowerBoost Hybrid and Lightning EV.
Technical specifications
15 specifications| Vehicle fitment | 2021-2026 |
|---|---|
| Supported vehicle type | standard gasoline models only |
| Excluded models | 3.5L PowerBoost Hybrid, Lightning EV, or Super Duty |
| Listed engine options | 2.7L, 3.5L EcoBoost & 5.0L V8 |
| Operation | sets your truck's start-stop system to OFF each time you start the engine |
| Connection location | factory gateway module behind the glove box |
| Installation type | Plug & Play |
|---|---|
| Installation time claimed | 5 minute install |
| Wiring changes | No coding, no wire cutting |
| OBDII access | keeps your OBDII port free for other devices |
| Sleep-mode draw claimed | less than 20mA |
| Harness covering | automotive-grade black fabric tape |
| Weight listed | 4.6 ounces |
|---|---|
| Package dimensions | 7.95 x 2.72 x 0.67 inches |
| Model number | torqyf150 |
What to know before buying
- Confirm the truck is a 2021–2026 gasoline F-150 before buying. Installation requires access behind the glove box, and the harness must click firmly into place. The listing’s five-minute estimate is a manufacturer claim. Sleep current and compatibility statements are likewise listing claims, not independent verification.
Who is it for?
A good fit for
- Owners of compatible 2021–2026 gasoline Ford F-150s who want start-stop left off at startup.
- Drivers comfortable accessing the factory gateway area behind the glove box for a plug-in installation.
Less suited to
- Ford F-150 PowerBoost Hybrid or Lightning EV owners.
- Super Duty owners or buyers seeking a device for another vehicle.

Customer reviews on Amazon
- 5 stars
83% 83% - 4 stars
3% 3% - 3 stars
3% 3% - 2 stars
2% 2% - 1 star
9% 9%
Customer feedback highlights easy installation, with the supplied summary describing setup in about two minutes, and reports that the device removes the need to press the start-stop button. This aligns with its plug-in, automatic-off purpose, though the customer-reported time differs from the listing’s five-minute installation claim. Feedback also praises functionality and value. Ratings are mostly five-star, but a smaller one-star share indicates that experiences are not uniformly positive. Ratings alone do not explain the reasons.
Positive themes
- Customers report easy installation and appreciate not needing to press the start-stop button each trip.
- Feedback praises functionality and perceived value.
Frequently asked questions
Which trucks is this module listed to fit?
The listing specifies 2021–2026 standard gasoline Ford F-150 models and names 2.7L, 3.5L EcoBoost, and 5.0L V8 engines. It excludes PowerBoost Hybrid, Lightning EV, and Super Duty.
What does the module do?
It is designed to set the start-stop system to OFF each time the engine starts, so the driver does not need to press the button again.
Where does it connect?
The listing says it plugs into the factory gateway module behind the glove box. It describes the installation as plug-and-play, with no coding or wire cutting.
Does it include an installation tool?
The feature text claims a free trim removal tool is included. No explicit package inventory was provided, so confirm the selected listing’s contents.

Alternative options

Auto Start Stop Eliminator for Ford F-150 2015-2020, Plug & Play, Remembers Auto St...
$39.99

4D Tech Auto Start Stop Eliminator Compatible with 2021-2027 Ford F-150 | Remembers ON or OFF; plug-and-play installation; includes Raptor; not compatible with PowerBoost Hybrid models
$99.99

Auto Start Stop Eliminator for 2021-2026 Ford F150 FCC Compliant | Idle Stop Disabl...
$59.99

Auto Start Stop Eliminator for Ford F150 2021-2026, Memory Harness | Smart Memory, ...
$55.99

AFM DFM Disabler & Auto Start Stop Eliminator for SUVs Trucks Cars | Fits select Ch...
$99.99

Auto Start Stop Eliminator Compatible for Ford F150 Accessories 2015-2020, Autostop...
$46.80

Auto Start Stop Eliminator Compatible with Ford F150 2021-2026 | Easy-Install Autos...
$59.00

Auto Start Stop Eliminator for Ford F150 2021-2026, Plug & Play | Memory Module Rem...
$49.99

Auto Start Stop Eliminator for F150 2021-2026 Ford Accessories | Fuse Protection By...
$59.99

Stopdefy for Ford Maverick 2025-2026 Auto Start Stop Eliminator | Easy Install, Aut...
$59.00

Rydonair Short Antenna for Ford F150 2009-2027 & Bronco 2021-2024 | 7" Antenna, Enhanced Signal Reception, Flexible, Car Wash Safe, Copper Coil, Two-Year Warranty
$24.99

Rough Country Tailgate Assist for Ford F-150/F-250/F-350 Super Duty Truck 2WD/4WD (2015-2027) - Smooth, Safe & Controlled Tailgate Lowering
$34.95























