1 / 7Saree TrailerHub2000 5-Lug Trailer Hub Kit, 2-Pack
Saree TrailerHub2000 is a two-pack of trailer hub kits listed for 2,000 lb straight-spindle axles. The 5×4.5-inch bolt pattern and bearings and seals for two spindle sizes make it a possible replacement option, but it is not listed for tapered spindles.
At a glance
- Two hub kits are listed with a 5x4.5-inch bolt pattern and a 2,000 lb axle capacity.
- The listing names bearings and grease seals for both 1-inch and 1-1/16-inch straight spindles.
- The claimed kit includes lug nuts, dust caps, washers, castle nuts and cotter pins.
Often bought together
Pros and cons
Pros
- The kit listing covers two straight-spindle sizes with corresponding bearing types.
- The stated accessory inventory includes hardware for a pair of hubs, reducing the need to source several installation parts separately.
Cons
- Not suitable for tapered spindles, according to the listing.
Technical specifications
13 specifications| Brand | Saree |
|---|---|
| Model | TrailerHub2000 |
| Listed axle capacity | 2,000 lbs |
|---|---|
| Bolt pattern | 5x4.5" |
| Spindle type | straight spindle |
| Spindle sizes listed | 1" or 1-1/16" |
| Bearing sizes | L44643 bearings for 1" axles and L44649 bearings for 1-1/16" axles |
| Grease seal sizes | two 1.25" ID and two 1.5" ID grease seals |
| Hub material | gray cast iron |
|---|---|
| Hub finish | black coating |
| Dust cap finish | galvanized |
| Dimensions listed | 15 x 7 x 5 inches |
|---|---|
| Weight listed | 7.44 pounds |
What to know before buying
Listing details to confirm
Confirm the axle is a straight-spindle type and verify spindle size, bearing fit, seal dimensions and wheel bolt pattern before ordering. The listing gives two different seal descriptions: two 1.25-inch and two 1.5-inch ID seals in one feature claim, but a package list specifying two of each size with 1.98-inch O.D. It also describes L44649 and L44643 bearings as four of each in the package inventory, while another claim describes each bearing type as supplied for its corresponding axle size. Check the selected listing for the exact kit contents and fit.
Who is it for?
A good fit for
- Owners replacing hubs on a compatible 2,000 lb straight-spindle axle with a 5x4.5-inch bolt pattern.
- Buyers who want a kit listing bearings and seals for both 1-inch and 1-1/16-inch spindle options.
Less suited to
- Trailers with tapered spindles.
- Buyers who have not confirmed the spindle, bearing, seal and wheel-pattern measurements.

Customer reviews on Amazon
- 5 stars
78% 78% - 4 stars
10% 10% - 3 stars
4% 4% - 2 stars
3% 3% - 1 star
5% 5%
Customer feedback highlights perceived good quality, ease of installation, fit and function, with mentions of pressed-in outer races and a complete replacement kit. Those reports may matter to buyers planning a hub replacement, but they do not establish compatibility with a particular axle. The aggregate ratings are generally favorable, though a smaller portion are low ratings, and the provided evidence does not explain their reasons.
Positive themes
- Customers report good quality, fit and function.
- Customers describe installation as easy, and one notes that the outer races were already pressed into place.
- Customers mention the kit's completeness.
Frequently asked questions
Will this fit a tapered spindle?
No. The listing specifies straight-spindle axles and says the hubs are not compatible with tapered spindles.
Which spindle sizes are listed?
The listing identifies 1-inch and 1-1/16-inch straight spindles, with L44643 and L44649 bearings respectively. Verify the actual spindle and bearing fit before purchase.
What should I confirm about the seals?
The feature claims conflict on the seal inventory. One names two seals of each ID size, 1.25 inches and 1.5 inches, while another package list gives two of each and specifies 1.98-inch O.D. Confirm which seals are included.

Alternative options

5x4.5'' Trailer Hub Kits for 2000lb 1'' or 1-1/16'' Straight Axle | 5 on 4.5'' Trai...
$62.99

Pre-greased 4 on 4'' Trailer Hub Kit for 2000 lb 1'' Straight Axle | 4x4'' Trailer ...
$62.99

2 Sets 3500lb Trailer Hub Kit 5 Bolt 4.5, Trailer Hubs for #84 Tapered Axle | 5 Lug...
$47.99

2 Set 3500lb Trailer hub kit 5 Pair 4.5‘ for 1-1/16’‘ to 1-3/8’' Trailer Tapered ax...
$45.27

2000lb Trailer Axle Bearing Boat Trailer Hubs 5 Lug 5 * 4.5" fit 1" and 1-1/16" [St...
$63.99

4 on 4'' Trailer Hub Kits for 2000 lb 1" or 1-1/16" Straight Axle | 2Sets 4x4'' Tra...
$62.99

2000lb 5 on 4.5 Trailer Hub Kit for 1-1/16'' Straight Spindle | Pre-Lubricated Trai...
$62.99

Trailer Hub Kit 5 Bolt 4.5 Pre-Installed Lubricated for 3500 lb | Trailer Idler 5 L...
$62.99

Aeagle 2 Sets 5 on 4.5" Trailer Hub Kits for 1-1/16" & 1-3/8" Tapered Axle | 5 Lug Idler Hub for Boat Trailer 3500lb #84 Spindle w/ Inner & Outer Bearings, Replaces L68149(1.378") L44649(1.063")
$49.99

2Sets Galvanized Trailer Idler Hub Kits 5 Bolt 4.5 for 3500 lb | Pre-Installed and ...
$67.99

Redants 2 Pack 2000 lbs Trailer Hub Kit 5 on 4.5", 1-1/16" Straight Spindle ONLY, Pre-Greased Assembly with L44649 Bearings for Boat/Utility Trailer
$63.99

SEHNSUCHT Trailer Wheel Idler Hub Kit, 5-Hole, 4.5" Bolt Idler Hub for 3500lb Trailer Axles, Fit 1-1/16" to 1-3/8" Tapered Shaft, Trailer Wheel Hub(Set-2 Hot Dip Galvanized, Not Fit Straight Shaft)
$57.99






















