1 / 7SainSmart PEBA 90A Flexible 3D Printer Filament, 1 kg, Black
SainSmart PEBA 90A is a black flexible filament for FDM printing, positioned as a lightweight, high-rebound alternative to TPU. Its 1.75 mm format is listed for most FDM printers with dual-gear extruders, while customer feedback is mixed on printability and durability.
At a glance
- Manufacturer claims up to 78% energy return, lower density than TPU and printing up to twice as fast as TPU.
- Flexibility and hardness can be adjusted through print settings, including infill.
- Listed compatibility covers most FDM printers using 1.75 mm filament and dual-gear extruders.
Reference price: $52.99
Price checked: Nov 19, 2026
View offerAhead of Black FridayExplore the selectionOften bought together
Pros and cons
Pros
- The PEBA material and flexible 90A designation target elastic parts and rebound-focused prints.
- The stated 1.75 mm diameter and dual-gear-extruder compatibility cover a broad set of FDM setups, according to the listing.
- Adjustable infill provides a way to tune printed parts from softer to more structural.
Cons
- Customer feedback includes reports of failed prints and material fracturing after moderate play, so results may not suit demanding parts without validation.
Technical specifications
9 specifications| Brand | SainSmart |
|---|---|
| Model | PEBA 90A |
| Weight listed | 2.2 pounds |
|---|---|
| Filament diameter | 1.75 millimeters |
| Material listed | PEBA |
|---|---|
| Color | Black |
| Recommended nozzle temperature | 230°C |
|---|---|
| Recommended heated bed temperature | 40°C |
| Drying guidance | 65°C for 15 hours if needed |
What to know before buying
- The 78% rebound, lower-density, faster-printing and nylon-like-strength figures are manufacturer claims, not independent measurements. The listing recommends 230°C nozzle and 40°C bed temperatures, and drying at 65°C for 15 hours if needed. Confirm printer compatibility and validate settings and durability for the intended part.
Who is it for?
A good fit for
- FDM users with a compatible 1.75 mm filament path and dual-gear extruder seeking flexible, rebound-oriented material.
- Prototyping sports gear, cushioning, robotics joints, wearables or other elastic parts where users can tune infill and test performance.
Less suited to
- Buyers who need established durability for high-impact or sustained-play parts without first validating prints.
- Printers that do not support 1.75 mm filament or cannot feed flexible filament reliably.

Customer reviews on Amazon
- 5 stars
71% 71% - 4 stars
11% 11% - 3 stars
8% 8% - 2 stars
5% 5% - 1 star
5% 5%
Customer feedback highlights perceived quality and bounce, with one report noting use in an airless basketball. Experiences with printability and durability are mixed, including both reports of resilient, well-printed parts and complaints of ruined prints or fracture after moderate play. Opinions on value also differ. For rebound-oriented or sports-related parts, the positive impressions may be relevant, but the durability concerns make testing a representative print prudent before relying on it in sustained-use applications.
Positive themes
- Some customers praise the filament's quality and bounce, including a report of effectiveness for an airless basketball.
Negative themes
- Some customers report prints being ruined and material fracturing after moderate play.
Mixed feedback
- Printability and durability receive mixed feedback, with reports of both successful printing and resilience and negative outcomes.
- Value opinions vary, with some customers willing to buy again and others finding it not worth the cost.
Frequently asked questions
What printers does SainSmart PEBA 90A support?
The listing says it works with most FDM printers using 1.75 mm filament and dual-gear extruders. Check that your printer's feed system is suitable for flexible filament.
What print settings does the listing recommend?
It gives a nozzle temperature of 230°C and a heated bed temperature of 40°C. It also recommends drying the filament at 65°C for 15 hours if needed, with speed and flow adjusted for extrusion.
Can the printed flexibility be changed?
The manufacturer says flexibility and hardness can be tuned through infill settings, allowing softer or more structural results. Actual behavior depends on the print and should be tested for the intended use.
Is the rebound and speed performance independently established?
No independent verification is provided. The claims of up to 78% energy return and printing up to twice as fast as TPU are manufacturer statements.

Alternative options

Polymaker TPU Filament 1.75mm, 95A TPU, 1kg, Matte Purple | 3D Printer Filament, High Speed 95A TPU Filament, Flexible 3D Filament, Dimensional Accuracy +/- 0.03mm
$20.79

SainSmart TPU Filament 1.75mm Flexible 3D Printer Filament, 95A, BLack | High Elasticity & Durability, Smooth Printing, 0.8kg Spool for Most FDM 3D Printers & Filament Dryer
$22.79

SainSmart Light Weight Filament 1.75mm, 1KG, LW-PLA Low-Density Active Foaming 3D Printer Filament for RC Planes Drone Parts and Cosplay, Black PLA Filament
$39.99

Amolen Rebound PEBA 90A Flexible Filament, 1.75mm 3D Printer Filament 1kg | 78% Energy Return & 20% Lighter, High-Speed Printing Lightweight for Sports & Robotics, Drones & Functional Prototypes, Black
$47.49

SainSmart Flex TPU Air, 1.75mm Lightweight Foaming TPU Filament, 1kg, Adjustable Hardness 77A–93A, High Resilience & Matte Finish, Easy Printing & No Clogging, for Wearables, Sports Gear
$39.99

Polymaker Panchroma PLA Filament 1.75mm, 1kg, Black | High Speed 3D Filament Fits Most FDM Printers, Up to 500mm/s, Easy&Clog-Free, Neatly Wound, ±0.02mm, Offering High Strength
$14.99

PLA Filament, Silk PLA, 3D Printer Filament, PLA Filament 1.75mm Dimensional Accura...
$19.99

2-Pack Upgraded 0.6MM Hotend kit for Bambu lab P2S/X2D/H2D/H2S/H2C(4-PK Silicone Socks with QR Code), Extruder Include Hardened Steel Nozzle and electroplated Heating Block for bambus 3D Printer
$12.00

SUNLU Easy PA, PA6+66 Nylon Filament 1.75mm ,1KG(Black) | Warp-Free & Easy Printing with Nylon 6+66, Strong, Durable Engineering Filament on a PC Spool ,Fit Most FDM Printer
$22.39

OVERTURE TPU 2KG Bundle 95A Flexible 3D Printer Filament 1.75mm | High Elasticity & Durability Filament, 2 Pack 1kg Spool (2.2lbs), Fit Most FDM Printer (Black*2)
$32.79

SUNLU TPU Filament 1.75mm,(1kg,Black,95a tpu) | 3D Printer Filament,High Speed 95A TPU Filament,Flexible 3D Filament for Fast Printing,Dimensional Accuracy +/- 0.03mm
$19.94

SUNLU PETG Filament 1.75mm,4kg,2 Black+2 Black | 3D Printer Filament, Less Stringing, Good Layer Adhesion, High Toughness, PETG Filament 1.75 ±0.02mm
$37.04
























