1 / 7POWERTEC 70304 2-1/2-Inch Dust Collection Fittings Network
The POWERTEC 70304 dust collection fittings network is a plastic kit for building a 2-1/2-inch workshop dust collection layout. Its listed pipes can be cut to fit station needs, while clear tubing helps make visible blockages easier to spot.
At a glance
- The listed kit includes five blast gates, four Y-fittings, a reducer and a 90-degree elbow for routing dust collection lines.
- Four clear pipes are listed at 3 feet each and can be cut to fit a shop layout.
- The manufacturer describes the pipe-to-fitting connections as a friction fit that requires no additional couplers.
- Clear pipe can help users see dust or wood-chip blockages for inspection.
Often bought together

Qucship 2 1/2" x 20' PVC Dust Collection Hose, 2.5 Dust Collection Hose | Clear & Flexible, Puncture Resistant, Wire Reinforced, 4 Clamps, 2.5 Dust Hose For Woodworking Workshops Table Saw Band Saw
$24.64

POWERTEC 70127 2-1/2 Inch Key Hose Clamp, Adjustable Stainless Steel Hose Clamps for Dust Collector and Dryer Vent Hose, Worm Gear Clamp, 5 pack
$8.59
Pros and cons
Pros
- Multiple gates and branch fittings support routing collection to several workshop stations.
- Cut-to-size pipe offers flexibility when planning individual station runs.
- Transparent pipe makes internal blockages easier to notice.
Technical specifications
6 specifications| Brand | POWERTEC |
|---|
| Weight listed | 16 ounces |
|---|---|
| Pipe outside diameter | 2.5 inches |
| Pipe length listed | 3 feet |
| Material listed | Plastic |
|---|---|
| Color | Clear |
What to know before buying
- Customer feedback reports varied fit, from fitting well to connections feeling too tight, and varied durability impressions. The kit is plastic, so account for these reports when deciding whether it suits your workshop setup.
What’s in the box
Included- 5 dust collection blast gates
- 1 reducer
- 4 3-foot dust collection pipes
- 4 Y-fittings
- 1 90-degree elbow
- 10 U bracket clamp hangers
- 20 screw pans
- 20 wall plugs
Who is it for?
A good fit for
- Woodworkers setting up a 2-1/2-inch dust collection network across several stations.
- Shop owners who want to cut pipe runs to match their layout and inspect for visible clogs.
Less suited to
- Buyers who need a complete system built around a different duct diameter, as compatibility beyond the stated 2-1/2-inch setup is not established here.
- Shops that require flexible hose throughout rather than the listed rigid plastic pipes.

Customer reviews on Amazon
- 5 stars
73% 73% - 4 stars
17% 17% - 3 stars
6% 6% - 2 stars
2% 2% - 1 star
2% 2%
Customer feedback highlights perceived quality, useful dust collection and easy installation without gluing. Fit and durability impressions vary, and value opinions are mixed, with some considering the kit worthwhile and others objecting to the cost of its rigid parts. For buyers planning a 2-1/2-inch network, those differing fit reports matter when joining the listed pipes and fittings, while the clear-pipe layout offers a way to inspect for blockages.
Positive themes
- Customers describe the kit as working well with dust collectors and helping keep dust down.
- Customers report easy installation that does not require gluing.
Mixed feedback
- Fit opinions vary, with some saying it fits well and others finding fittings too tight.
- Durability impressions differ, from robust to flimsy.
- Value opinions are mixed, including concern about the cost of rigid parts.
Frequently asked questions
What is included in the listed kit?
The manufacturer contents list specifies five blast gates, one reducer, four 3-foot pipes, four Y-fittings, one 90-degree elbow, ten U bracket clamp hangers, twenty screw pans and twenty wall plugs.
Can the pipes be shortened?
The manufacturer says the pipes can be cut and sized for individual station needs.
Do the pipe connections need extra couplers?
The listing describes a snug friction fit between the clear pipes and the included elbow and Y-fittings, with no additional couplers required for those connections.
What should I know about fit?
Customer feedback is mixed, with some reporting a good fit and others finding the fittings too tight. Plan for that variation when laying out connections.

Alternative options

POWERTEC 2-1/2" ID Dust Collection End Cap for 2-1/2" OD Pipes, Plastic Pipe Cover for Woodworking Dust Systems, 2-Pack (70451-P2)
$11.04

POWERTEC 4" x 20' Dust Collection Hose, 4 Inch Dust Collector Hose for Table Saw, Band Saw, Planer, Jointer, Woodworking and Wood Shop Dust Collection System (70143)
$43.68

Dust Collection Hose 2 1/2" x 20',Heavy PVC 2.5 Inch Dust Collector Hose | Puncture...
$22.60

POWERTEC 70326 Blast Gate 4 Inch, w/Anti Clog and Air Leak Seal for Dust Collection
$17.99

POWERTEC 70337 2-1/2" Dust Control Flex Cuff with Adjustable Key Hose Clamps, Hose Connector Rubber Cuff Coupler for Woodworking Dust Collection Fittings, Dust Collector Accessories & Machinery, 1pk
$9.45

VEVOR Cyclone Dust Separator, 4" Retrofit Cyclone Separator for Dust Collectors, ABS Material With 2" Hole O.D. Connector & Hose for Wet/Dry Shop Vacuums, Fits 5-10 Gallon Tank (Tank Exclude)
$59.30

4"x70' Dust Collection Hose,Puncture-Resistant,4Inch Flexible PVC Fume Hose | For 4...
$114.99

SharkBite 4 Port PEX Expansion Poly Tee, 3/4 Inch Open Trunk with 1/2 Inch Outlet, Multi Line Water Manifold Plumbing Fittings for PEX-A Tubing, UAMPT4OZ
$14.00

4"&2.5" Magnetic Dust Collection Fittings for 6 Woodwork Shop Machines | Magnetic D...
$66.99

4"x55' Clear PVC Dust Collection Hose, 304 Stainless Steel Clamps | Flexible 4 Inch...
$89.99

POWERTEC 70148-P2 2-1/2 Inch Dust Control Flex Cuff with Steel Hose Clamps, Hose Connector Rubber Cuff Coupler for Woodworking Dust Collection Fittings, Dust Collector Accessories & Machinery, 2 pack
$16.89

4"x50' Clear PVC Dust Collection Hose, Flexible Tube with 4 Clamps | Puncture resis...
$89.99