1 / 7Polymaker Panchroma Matte PLA Bundle, 4 Colors, 250 g Each
Colors Each: Polymaker Panchroma Matte PLA is a four-color filament bundle with separate 250 g spools in muted earth tones. Its listed 1.75 mm diameter and maker-recommended PLA settings suit many FDM/FFF printers, while the smaller spools offer less material per color than a full-size roll.
At a glance
- Four separate 250 g spools provide a coordinated palette of matte earth tones.
- The listing describes the colors as names, not wood-fiber filament.
- The manufacturer says the filament works with most 1.75 mm FDM/FFF printers and recommends a 0.4 mm or larger nozzle.
Pros and cons
Pros
- Four distinct muted colors make coordinated models possible without buying full-size rolls of each shade.
- The listed 1.75 mm diameter and standard PLA settings target broad FDM/FFF printer compatibility.
- Customer feedback reports smooth printing and consistent color, though experiences vary.
Cons
- Each color is supplied in a 250 g spool, which may run short for larger or repeated projects.
- Customer feedback includes mixed reports about tangling and bed adhesion.
Technical specifications
11 specifications| Brand | Polymaker |
|---|---|
| Model | PM1002059 |
| Material listed | Polylactic Acid |
|---|---|
| Finish | Matte finish |
| Colors and spool weights | 250g*4-matte Wood Brown+matte Army Brown+matte Army Beige+matte Muted Terracotta |
| Filament diameter | 1.75 millimeters |
|---|---|
| Weight listed | 0.25 kg |
| Nozzle temperature | 190-230°C |
|---|---|
| Bed temperature | 25-60°C |
| Print speed | up to 300mm/s |
| Drying guidance | 55°C for 6 hours only if moisture is absorbed |
What to know before buying
- Manufacturer guidance gives a 190-230°C nozzle range, a 25-60°C bed range, and speeds up to 300mm/s, but actual speed depends on printer, nozzle, layer height, and model. Dry at 55°C for 6 hours only if moisture is absorbed. A 0.4 mm or larger nozzle is recommended, and a hardened nozzle may reduce wear with frequent matte PLA printing. The listing states a 40-day quality assurance period, but its coverage terms are not detailed here.
Who is it for?
A good fit for
- Makers seeking matte earth-tone filament for terrain, miniature scenery, architectural models, props, organizers, prototypes, or decor.
- Users with a compatible 1.75 mm FDM/FFF printer who prefer several smaller color spools.
Less suited to
- Projects that require a large uninterrupted supply of one color may be better served by a larger spool.
- Buyers seeking actual wood-fiber filament, since Wood Brown is a color name in this PLA bundle.

Customer reviews on Amazon
- 5 stars
84% 84% - 4 stars
6% 6% - 3 stars
2% 2% - 2 stars
3% 3% - 1 star
5% 5%
Customer feedback is broadly favorable about printability, color consistency, matte appearance, and compatibility across different printers. Some customers report smooth printing and good adhesion, while others describe tangling or poor adhesion, and value opinions are mixed. For buyers using this 1.75 mm PLA for smaller models or color accents, these reports suggest encouraging but not uniform experiences, with results potentially depending on setup.
Positive themes
- Customers report consistent color between rolls, smooth printing, and a matte finish they like.
- Some customers describe good compatibility across different printers.
Mixed feedback
- Customer experiences with filament tangling and bed adhesion vary, with reports ranging from no issues to tangling or poor adhesion.
- Opinions about value for money are mixed.
Frequently asked questions
How many colors and how much filament are listed?
The listing describes four colors, each on a separate 250 g spool: Matte Wood Brown, Matte Army Brown, Matte Army Beige, and Matte Muted Terracotta.
Is the Wood Brown spool made with wood fibers?
No wood-fiber material is claimed for this product. Wood Brown is a color name in the matte PLA set.
What printer and settings does the listing recommend?
The manufacturer says it works with most 1.75 mm FDM/FFF printers and recommends a 0.4 mm or larger nozzle. Listed conditions are 190-230°C at the nozzle and 25-60°C at the bed, with speeds up to 300mm/s depending on the printer and model.
Does customer feedback indicate consistent printing?
Feedback reports smooth printing and consistent color, but also mixed experiences with tangling and bed adhesion. These are customer-reported impressions, not a guarantee for a particular printer or setup.

Alternative options

Polymaker Panchroma PLA Filament Bundle 250G, 16 Colors 3d Printer Filament | Multicolor 250g*16 spool, 4kg Total, 15 Regular Solid Color and 1 Translucent Natural
$54.39

AMOLEN PLA Silk 3D Printer Filament Dual Color Bundle, 1.75mm 4x200g Spool | Shiny Silk Bi-Color PLA Filament, Multicolor Change, +/-0.02mm Accuracy, Fits Most FDM Printers & DIY Decorative Prints
$21.79

ANYCUBIC PLA+ 3D Printer Filament 1.75mm Bundle, 10KG, Multicolor | PLA Plus, Black, White, Texture Grey, Pink, Red, Blue, Green, Orange, Yellow, Purple
$97.46

Kingroon 10KG Silk PLA Filament, Tri Color PLA Filament, Multicolor 3D Printer Filament, Dimensional Accuracy 1.75mm (+/-0.02mm) 10 Rolls*1KG Spool(22lbs), 10 Different Tricolors
$127.49

SUNLU PLA Filament 1.75mm, 250g Spool Bundle, 3D Printer Filament | Beginner Friendly Multicolor Bundle, Easy Printing, 8 Rolls, White+Red+Orange+Yellow+Green+Blue+Cyan+Purple
$37.49

Kingroon PLA 3D Printer Filament, 10 Rolls, Dimensional Accuracy +/- 0.02 mm, 10kg Spool(22lbs), 1.75 mm,2Black+2White+2Grey+2Red+2Blue
$105.99

ELEGOO Rapid PLA Plus 3D Printer Filament 1.75mm Black 4KG | 30-600mm/s High Speed Printing; Smooth Flow; Low Warp; +/-0.02mm Accuracy; for FDM 3D Printers; 4 x 1kg(2.2lb)
$36.51

Amazon Basics Silk PLA 3D Printer Filament for 3D Printing, 1.75mm, 1kg (2.2 lbs) Gold
$23.35

SUNLU Wood PLA Filament 1.75mm, 250g Spool Bundle, 3D Printer Filament | Beginner Friendly Multicolor Bundle, Real Wood Fiber, Natural Wood Texture, 4 Rolls, Walnut+Logs+Cherry+Maple
$24.21

Colourbing PLA+ 3D Printer Filament Bundle 1.75mm, Over 20% Real Wood Powder, Natural Grain Texture, Compatible with Most FDM 3D Printers, Beginner Friendly, 4 x 250g Spools (Oak, Teak, Cherry, Light)
$20.89

Amazon Basics Silk PLA 3D Printer Filament, 1.75mm, 1 kg Spool (2.2 lbs), Silver, No Heat Bed Required
$26.21

iplusmile 6 Matte PLA Filament Bundle 1.75mm for 3D Printer, 1.5KG | High Speed PLA Classic Skin/Brown/Beige/Black, Neatly Wound 3D Printer Filament, ±0.02mm Accuracy, for Most FDM 3D Printers
$48.99






















