1 / 7Polymaker Fiberon PA612-CF15 Nylon Filament, 1.75 mm, 1 kg
Polymaker Fiberon PA612-CF15 is carbon-fiber-reinforced nylon filament for functional 3D-printed parts. Its long-chain PA612 base is presented as less moisture-sensitive than PA6 and stronger than PA12, but it still needs dry handling and a wear-resistant nozzle.
At a glance
- PA612 nylon reinforced with 15 wt% carbon fiber, aimed at rigid functional prints and tooling.
- Manufacturer says it is less moisture-sensitive than PA6 while remaining hygroscopic.
- The listed 175°C HDT applies after a specific annealing process and is not a continuous-use temperature guarantee.
- Requires an all-metal hotend and a hardened steel or ruby nozzle according to the supplied printing guidance.
Reference price: $59.99
Price checked: Nov 19, 2026
View offerAhead of Black FridayExplore the selectionOften bought together
Pros and cons
Pros
- The supplied TDS claims lower moisture sensitivity than PA6-based nylon and stronger mechanical performance than PA12-based materials.
- Annealing guidance includes a defined 175°C heat-deflection test result and a stated process.
- The source gives practical printing guidance, including temperature ranges, nozzle material and storage humidity.
Cons
- Still requires moisture control, and the suggested drying routine adds preparation before printing when filament has been exposed to ambient humidity.
- A hardened steel or ruby nozzle is specified, so a standard nozzle may not suit this abrasive carbon-fiber-filled material.
Technical specifications
21 specifications| Brand | Polymaker |
|---|---|
| Model | FG07003 |
| Weight listed | 1 kg |
|---|
| Material listed | Nylon |
|---|---|
| Filament diameter | 1.75mm |
| Color | Fiberon Pa612-cf15 Black |
| Reinforcement | 15 wt% carbon fiber |
| Recommended nozzle temperature | 250–300°C |
|---|---|
| Build plate temperature | 40–50°C |
| Heat deflection temperature | 175°C at 0.45 MPa after annealing at 100°C for 16 hours |
| Dry X-Y tensile strength | 91.9 MPa |
| X-Y tensile strength after specified annealing and moisture conditioning | 83.1 MPa |
| Bending modulus (dry) | 4583 |
| Bending modulus (wet) | 3888 |
| Storage and printing humidity guidance | below 20% relative humidity |
| Drying guidance | 100°C for 10 hours |
| Suggested print speed | up to 300 mm/s |
| Hotend guidance | all-metal hotend |
| Nozzle guidance | hardened steel or ruby nozzle |
| Cooling fan guidance | cooling fan off |
| Heated chamber guidance | A heated chamber is not required under the TDS conditions. |
What to know before buying
- Performance figures are manufacturer claims. The 175°C HDT is measured after annealing at 100°C for 16 hours at 0.45 MPa, not a general continuous operating temperature. The up-to-300 mm/s speed is conditional on a tuned profile, and drying at 100°C for 10 hours is advised after ambient exposure or when print symptoms appear. Confirm printer compatibility with the all-metal hotend and wear-resistant nozzle guidance, and keep filament below 20% relative humidity during storage and printing.
Who is it for?
A good fit for
- Users printing rigid functional parts, jigs, fixtures, tooling or engineering prototypes who can meet the filament's temperature and nozzle requirements.
- Print setups where reduced moisture sensitivity relative to PA6 is useful, while still allowing for dry storage and handling.
Less suited to
- Printers without an all-metal hotend or a hardened steel or ruby nozzle, based on the supplied printing guidance.
- Users seeking a low-maintenance filament that can be stored or printed without humidity control.

Customer reviews on Amazon
- 5 stars
90% 90% - 4 stars
4% 4% - 3 stars
0% 0% - 2 stars
0% 0% - 1 star
6% 6%
Aggregate ratings are strongly positive overall, with most ratings in the five-star category, but a small one-star share shows that experiences are not uniformly favorable. Without comment-level feedback, the ratings do not establish specific strengths or problems. For buyers, the practical question is whether their printer and drying routine can handle the stated nylon and carbon-fiber printing requirements.
Frequently asked questions
What printer setup does the supplied guidance call for?
It specifies an all-metal hotend, a 250–300°C nozzle, a 40–50°C build plate, and a hardened steel or ruby nozzle. The cooling fan should be off. Confirm your printer can meet those requirements.
Does this nylon need drying?
It remains hygroscopic despite being described as less moisture-sensitive than PA6. The guidance says to keep it below 20% relative humidity during storage and printing, and to dry it at 100°C for 10 hours after ambient exposure or if stringing, bubbles or rough surfaces appear.
What does the 175°C heat-deflection figure mean?
It is a listed HDT result at 0.45 MPa after annealing at 100°C for 16 hours. It should not be read as the continuous operating temperature for every printed part.
Is a heated chamber required?
The supplied TDS guidance says a heated chamber is not required under its stated conditions. Results can depend on the printer and tuned profile.

Alternative options

Polymaker ASA Filament Bundle 4KG Black*4, UV & Weather Resistant, 1.75mm | Outdoor Functional Parts, Durable, High Heat Resistant, Impact-Resistant, Reliable Layer Adhesion, 3D Printer Filament
$51.99

Polymaker Panchroma Matte PLA 3D Printer Filament Bundle 4kg,Charcoal Black | 1.75mm High Speed 3D Printing Filament Fits for Most FDM Printers, ±0.02mm Accuracy, Neaty Wound & Matte Finish, 4kg Pack
$33.99

YXPOLYER Carbon Fiber Nylon Filament 3D Printer Filament PA6-CF Filament 1.75mm 1kg with PC Spool, PA6 CF 3D Printing Filament
$42.99

Polymaker Panchroma PLA Filament 1.75mm, 1kg, Grey | High Speed 3D Filament Fits Most FDM Printers, Up to 500mm/s, Easy&Clog-Free, Neatly Wound, ±0.02mm, Offering High Strength
$15.99

Polymaker PolyLite PC Filament 1.75mm 1kg Transparent | 1kg Clear Polycarbonate Filament, Transparent PC Filament, Strong & Tough & Heat Resistant 3D Printer Polycarbonate Filament
$25.49

ELEGOO Carbon Fiber PAHT 3D Printer Filament 1.75mm Black 0.5KG | Nylon CF High Temp, High Strength & Rigidity, Corrosion Resistance, 500g Spool Fits for Enclosed FDM 3D Printers
$24.99

Creality Carbon Fiber PETG Filament 1.75 mm 1KG, Night Gray, 1-Pack | Matte Finish, Heat-Resistant, High Strength & Outdoor Durable, High Speed 30-600mm/s, Fits for Most 3D Printers
$25.49

Polymaker PLA Pro Filament 1.75mm 1KG Black, High-Impact Resistance | Tough, High Speed Up to 500mm/s, Clean Surface, Low-Warp, Easy to Print on Most FDM 5D Printers, No Enclosure Required
$17.59

SUNLU PA12-CF Carbon Fiber Nylon Filament 1.75mm, 1KG (Black) | High Precision Engineering Filament with Excellent Wear & Oil Resistance, ±0.02mm Accuracy, Heat-Resistant Spool
$47.99

Polymaker HT-PLA-GF Filament 1.75mm Black 1KG, High Temp PLA, Neatly Wound | Heat Resistant to 150℃, Easy to Print, Heat Stable, Spool, Easy to Anneal, 3D Printer Filament with Most FDM Printers
$21.37

SUNLU PA12-CF 20% Carbon Fiber Nylon 1.75mm 3D Printing Filament, Black 1KG | Excellent Wear & Oil Resistance PA12 Filament, Heat-Resistant Spool, Nylon 3D Printer Filament
$47.99

TINMORRY PETG-GF Glass Fiber PETG Filament 1.75mm, 1 KG, Frosted Black | Glass Fiber Reinforced PETG, High Rigidity & Durability, Low Warping, Heat & Chemical Resistance, Frosted Finish
$17.09
























