Good Deal PicksDeals for the United States
BlogSearch
Product guide

Polymaker Fiberon PA6-CF20 3D Printing Filament, 1.75 mm, 0.5 kg

Printing: Polymaker Fiberon PA6-CF20 is a carbon-fiber-reinforced nylon filament for rigid functional prints, tooling, fixtures, and prototypes. It needs careful moisture control and a printer setup suited to abrasive, high-temperature material, so it is a better fit for experienced users than a basic PLA workflow.

At a glance

  • PA6 nylon reinforced with 20% carbon fiber, intended for stiff functional components and engineering prototypes.
  • The listing gives its highest heat-deflection claim only after annealing, at 100°C for 16 hours.
  • Moisture-sensitive filament calls for pre-drying and continued dry storage or printing.
  • Carbon fiber is abrasive, so the manufacturer calls for a hardened steel or ruby nozzle rather than standard brass.
Price
$31.99Save 20%

Reference price: $39.99

Price checked: Nov 21, 2026

View offerBlack Friday weekExplore the selection

Often bought together

Pros and cons

Pros

  • Carbon fiber reinforcement is intended to improve stiffness, strength, and dimensional stability for functional prints.
  • A stated 1.75 mm diameter and 0.5 kg spool suit users who need this material in a smaller spool quantity.
  • The listing provides detailed drying, nozzle, and annealing guidance for setup planning.

Cons

  • The required drying, humidity control, high nozzle temperature, and wear-resistant nozzle add preparation and equipment demands compared with simpler filaments.

Technical specifications

18 specifications
Identity
BrandPolymaker
ModelFG03001
Dimensions and installation
Weight listed0.5 kg
Diameter1.75 millimeters
Materials and properties
Material listedNylon
Dry X-Y tensile strength109.3 MPa
Young’s modulus8.64 GPa
Heat deflection temperature215°C at 0.45 MPa after annealing at 100°C for 16 hours
Bending modulus (dry)7037
Bending modulus (wet)2286
Printing and conditioning
Drying before printing100°C for 10 hours
Recommended storage and printing humiditybelow 20% relative humidity
Nozzle temperature280–300°C
Build plate temperature40–50°C
Nozzle requirementhardened steel or ruby nozzle
Fan settingcooling fan off
Annealing for optimum heat resistance and dimensional stability100°C for 16 hours
Maximum stated printing speed with tuned profileup to 300 mm/s

What to know before buying

Listing details to confirm

Listing details are not contradictory, but reported customer experiences are mixed: some describe good durability and build-plate adhesion while others report brittleness or poor adhesion. Manufacturer performance figures are conditional, including the 215°C heat-deflection value after annealing, and finished-part results may vary with design and print conditions.

Who is it for?

A good fit for

  • Experienced 3D-printing users making rigid fixtures, tooling, or functional prototypes who can control moisture and use a wear-resistant nozzle.
  • Buyers who want a half-kilogram spool of carbon-fiber-reinforced PA6 rather than a larger listed quantity.

Less suited to

  • Users seeking a low-preparation filament or printing with a standard brass nozzle.
  • Buyers without a way to dry and store moisture-sensitive nylon, or whose printer cannot reach the stated nozzle-temperature range.
Polymaker Fiberon PA6-CF20 3D Printing Filament, 1.75 mm, 0.5 kg · photo 2
Additional product photo 2

Customer reviews on Amazon

4.7 / 5 · 640 ratings
  • 5 stars89%89%
  • 4 stars4%4%
  • 3 stars2%2%
  • 2 stars1%1%
  • 1 star4%4%

Customer feedback describes the filament as consistently printable with an attractive surface finish, and some users say it is ready to print from the bag. Experiences are not uniform: durability and build-plate adhesion are mixed, with reports ranging from good heat and abuse resistance to brittleness or difficulty sticking. Value opinions also differ. These reports matter particularly for this moisture-sensitive nylon, since the listing requires drying and controlled humidity, and they do not replace the stated printer and annealing conditions.

Positive themes

  • Customers report good printability and surface finish, with some saying the material works consistently.

Mixed feedback

  • Customer reports on durability range from good resistance to brittleness.
  • Build-plate adhesion experiences differ, from successful sticking to difficulty adhering.
  • Customers disagree on whether the filament offers good value.

Frequently asked questions

What printer setup does the listing recommend?

It specifies a 280–300°C nozzle, a 40–50°C build plate, an all-metal hotend, and the cooling fan off. A heated chamber is not required according to the listing.

Does this filament need drying?

Yes. The manufacturer recommends drying it at 100°C for 10 hours before printing, then storing and printing below 20% relative humidity, ideally from a dry box.

Is a standard brass nozzle suitable?

The listing says carbon fiber is abrasive and calls for a hardened steel or ruby nozzle instead of standard brass.

Is the stated 215°C heat-deflection temperature unconditional?

No. The stated value is at 0.45 MPa after annealing at 100°C for 16 hours, and the manufacturer says final performance can vary with design and print conditions.

Polymaker Fiberon PA6-CF20 3D Printing Filament, 1.75 mm, 0.5 kg · photo 3
Additional product photo 3

Alternative options

Products with discounts that might interest you

4.7
ANYCUBIC Multicolor PLA 3D Printer Filament Bundle, 4 kg
ANYCUBIC Multicolor PLA 3D Printer Filament Bundle, 4 kg

$69.99

$36.09

-48%
-48%
Product details in Markdown