1 / 7Polymaker ABS Filament Bundle, Black, 4 kg, 1.75 mm
Polymaker ABS Filament Bundle is a 4 kg black ABS 3D-printing filament set in 1.75 mm diameter. Its listed heat resistance and toughness suit functional parts, but ABS printing calls for a hot bed and an enclosure is recommended, particularly for larger prints.
At a glance
- The listing describes ABS with strength, impact resistance, heat resistance and high toughness for practical parts.
- The manufacturer claims minimal odor compared with traditional ABS resins.
- Suggested uses include functional prototypes, mechanical parts, robotics, tools, fixtures and replacements.
Reference price: $44.99
Price checked: Nov 19, 2026
View offerAhead of Black FridayExplore the selectionOften bought together
Pros and cons
Pros
- A 4 kg bundle provides a substantial quantity of black filament for repeated or larger projects.
- The stated 1.75 mm diameter matches the common filament format, and the listing claims compatibility with most FDM printers.
- The listed temperature guidance gives buyers a concrete starting point for ABS setup.
Cons
- The recommended bed range of 90–100°C and use of an enclosed chamber, especially for large parts, require a printer setup suited to warm ABS printing.
Technical specifications
12 specifications| Brand | Polymaker |
|---|---|
| Material listed | Acrylonitrile Butadiene Styrene |
| Color | Black |
| Weight listed | 4 kg |
|---|---|
| Filament diameter | 1.75 millimeters |
| Manufacturer part number | PM1020017 |
| Nozzle temperature | 245–265°C |
|---|---|
| Bed temperature | 90–100°C |
| Cooling fan | turned off |
| Chamber | An enclosed printing chamber is recommended |
| Drying if moisture is absorbed | 70°C for approximately 6 hours |
| Vicat softening temperature | 104°C |
|---|
What to know before buying
- Manufacturer guidance calls for a 245–265°C nozzle, a 90–100°C bed and the fan off for optimal results. An enclosure is recommended to help limit warping, especially on larger parts. The listing also suggests PEI with ABS slurry and says a brim, raft or slower first layer can improve adhesion. Filament exposed to moisture may need drying at 70°C for about 6 hours. Claims are listing information, not independent verification.
Who is it for?
A good fit for
- Users printing functional prototypes, mechanical parts, tools, fixtures or replacement components who need black ABS filament.
- Owners of FDM printers that can reach the listed ABS nozzle and bed temperatures, ideally with an enclosure.
Less suited to
- Users seeking a low-temperature or enclosure-free printing material.
- Buyers who need material performance independently validated or documented beyond the listing claims.

Customer reviews on Amazon
- 5 stars
100% 100% - 4 stars
0% 0% - 3 stars
0% 0% - 2 stars
0% 0% - 1 star
0% 0%
There is only a single aggregate rating and no review-summary evidence, so it offers little basis for judging print quality, odor or ease of use. Consider the listed ABS setup requirements separately when deciding whether it fits your printer and projects.
Frequently asked questions
What printer setup does the listing recommend?
It specifies a 245–265°C nozzle and 90–100°C bed, with the cooling fan off for optimal results. An enclosed chamber is recommended, particularly for larger parts.
What should I do if the filament absorbs moisture?
The listing advises drying it at 70°C for approximately 6 hours. It says the filament is vacuum sealed with desiccant to help protect it before use.
What kinds of prints is this ABS intended for?
The listing names functional prototypes, mechanical parts, robotics, tools, fixtures and replacement parts, citing impact and heat resistance as intended benefits.

Alternative options

Polymaker PLA Pro Filament 1.75mm 10KG Bundle, High-Impact Resistance, 5 Black & 5 White
$95.99

Polymaker HT-PLA Pro Bundle 2KG Black*2, 1.75mm, High Heat Stability | High-Impact Tough PLA, Up to 300mm/s, Easy to Print, No Enclosure Required, 3D Printer Filament for Most FDM Printers
$23.99

Polymaker TPU Filament 1.75mm, 95A TPU, 4kg, Black | 3D Printer Filament, High Speed 95A TPU Filament, Flexible 3D Filament Fast Printing, Dimensional Accuracy +/- 0.03mm
$46.74

Polymaker PETG Filament 1.75mm 10KG Bundle, 5 Black & 5 White | 3D Printer Filament, High-Speed Up to 500mm/s, Neatly Wound, Smooth Feeding, Reduced Stringing, Strong Layer Adhesion
$77.14

Polymaker Panchroma PLA Filament 1.75mm, 1kg, Black | High Speed 3D Filament Fits Most FDM Printers, Up to 500mm/s, Easy&Clog-Free, Neatly Wound, ±0.02mm, Offering High Strength
$14.99

Inslogic Pre-Dried MetalFill PLA Filament 1.75mm, 1KG, Blue | Frosted Metallic Look, Art Déco Potential, Crisp Detail, Low Warp, Miniatures & Props
$23.97

Polymaker ABS Filament Black 1KG 1.75mm, Heat Resistant, Strength | High Toughness, Impact-Resistance, Low Odor, 3D Printer Filament for Most FDM Printers, Dimensional Accuracy +/- 0.03mm
$16.24

SOMELINE Micro Connector Crimping Tool Kit, 41 Types JST SH 1.0/GH 1.25/ZH 1.5/PH 2.0mm & Compatible with Molex PicoBlade 1.25mm/51005 51006 Connectors, 32-22 AWG Crimper for FPV RC DIY 3D Printer
$44.98

SUNLU PETG Filament 1.75mm,4kg,2 Black+2 Black | 3D Printer Filament, Less Stringing, Good Layer Adhesion, High Toughness, PETG Filament 1.75 ±0.02mm
$37.04

JUUPINE 3D Printer Build Plate Smooth PEO+Smooth PET 257x257mm Spring Steel Sheet for Bambu Lab P2S/X2D/X1/X1C/X1E/P1P/P1S/A1 Heat Bed for Bambu lab X2D Build Plate (Carbon Fiber + Diamond Pattern)
$11.19

SUNLU PLA+2.0 3D Printer Filament, Black, 4-Pack (4KG) | Upgraded PLA+ Filament 1.75mm, Tougher & Stronger, Neatly Wound, +/-0.02mm Accuracy, Individually Vacuum Packed
$40.79

OVERTURE TPU 95A Flexible 3D Printer Filament 1.75mm, 1kg White | High Elasticity & Durability Filament, 1kg Spool (2.2lbs), Fit Most FDM Printer (White)
$19.19
























