1 / 7monTEK TM2021W-M Fixed TV Wall Mount, 0.35-Inch Profile
The monTEK TM2021W-M is a fixed wall mount listed for 37- to 86-inch TVs, with a claimed 0.35-inch profile for a close-to-wall installation. Its broad VESA and stud-spacing claims may suit larger flat or frame TVs, but confirm the TV’s weight, mounting pattern, wall type and the stated hidden-bracket requirements before choosing it.
At a glance
- Fixed mount rather than a swiveling or tilting design.
- Listing claims a 0.35-inch profile and support for TVs from 37 to 86 inches.
- Dual kickstands are described as lifting the TV for cable access.
- A level, positioning plate and hardware kit are claimed as included.
Often bought together
Pros and cons
Pros
- Very low claimed profile can keep a compatible TV close to the wall.
- The listed VESA range and stud-spacing options cover multiple common TV and wood-stud layouts.
- Kickstands are intended to make cable access easier without removing the TV from the wall.
Cons
- A fixed mount offers no advertised swivel or tilt adjustment after installation.
- The unusually tight profile means connectors and cables behind the TV may need careful planning.
Technical specifications
15 specifications| Brand | monTEK |
|---|---|
| Model | TM2021W-M |
| Supported screen size | 37 inches |
|---|---|
| Maximum supported screen size | 86 inches |
| VESA pattern range | 200x200mm to 600x600mm |
| Claimed stud spacing | 16’’, 18” and 24” |
| Mounting type | Wall Mount |
|---|---|
| Movement type | Fixed |
| Listed profile | 0.35’’ |
| Weight listed | 2.8 pounds |
| Claimed maximum load | up to 165 lbs |
|---|---|
| Material listed | Metal |
| Color | Black |
| Compatible device | Television |
| Warranty description | 10 Year Warranty |
|---|
What to know before buying
- The listing says the mount fits concrete, brick or wood-stud walls, but its separate stud-spacing claim applies to wood studs. Confirm the wall type, TV weight and VESA pattern. For brackets to remain hidden, it specifies at least 5.3 inches from the top VESA holes to the top TV edge and a TV width of at least 28.5 inches. Cable access is described through kickstands. The 0.35-inch profile, up-to-165-pound capacity, 37-to-86-inch range and VESA range are listing claims, not independent verification. The page does not provide customer-comment summaries, so ratings alone do not establish specific strengths or defects.
Who is it for?
A good fit for
- Buyers seeking a fixed, close-to-wall fit for a compatible flat or frame TV.
- Installations where the TV’s VESA pattern and wood-stud spacing match the stated ranges.
- Setups that benefit from kickstands for occasional cable access.
Less suited to
- Buyers who need to swivel or tilt the screen after installation.
- TVs whose weight, VESA pattern, wall construction or hidden-bracket geometry does not meet the listed fit requirements.

Customer reviews on Amazon
- 5 stars
64% 64% - 4 stars
10% 10% - 3 stars
12% 12% - 2 stars
0% 0% - 1 star
14% 14%
Aggregate ratings are mixed, with a majority in the five-star category but a notable one-star share. Without customer-comment evidence, they do not show what buyers liked or disliked. Treat them as limited context rather than proof of fit or installation performance, and base compatibility on your TV and wall measurements.
Frequently asked questions
Does this mount move or tilt?
The listing identifies the movement type as fixed. It does not advertise swivel or tilt adjustment.
What TV sizes and VESA patterns are listed?
The listing claims compatibility with 37- to 86-inch TVs and VESA patterns from 200x200mm to 600x600mm. Confirm your TV’s pattern and weight before purchase.
What should I check for a hidden-bracket fit?
The listing specifies at least 5.3 inches between the top VESA holes and the TV’s top edge, plus a total TV width of at least 28.5 inches.
Does it allow cable access after installation?
The listing describes dual kickstands that lift the TV for cable access and equipment checks. It does not provide further clearance measurements.

Alternative options

monTEK Heavy Duty Fixed TV Wall Mount for 50-100 Inch TVs up to 220 lb | 1.2-in Low Profile, One-Piece Wall Plate, 4X Load-Tested, Quick-Release Lock, VESA 800x600mm, 16/18/24/32" Wood-Stud Spacing
$41.99

MOUNTUP TV Wall Mount Holds 250 lbs for 50-110 inch Large TVs, Heavy Duty Full Motion 1.65" Slim TV Bracket with Extension, Swivel & Tilt, Pre-Assembled, Max VESA 800x600mm, Fits 12-24" Studs
$119.99

monTEK 1.1-Inch Ultra Slim Full Motion TV Wall Mount for 43-90 Inch TVs | Low-Profile Mount Holds 132 lb at Full 16.5 in Extension; ±60° Swivel, Preassembled, Max VESA 600x400 mm, 16/18 in Wood Studs
$66.49

monTEK 1.1-Inch Ultra Slim Full Motion TV Wall Mount for 37-75 Inch TVs | Low-Profile Mount Holds 132 lb, 16.5 in Reach, +/-60° Swivel; 4X Load Tested, Preassembled, VESA 400x400mm, 16/18 in Studs
$58.88

monTEK 1.5" Ultra Slim Full Motion TV Wall Mount for 23-75 Inch TVs | Low Profile Articulating Bracket, ±60° Swivel, 13" Extension, Max VESA 400x400mm, 99 lb Capacity, Fits 16" Studs
$44.64

monTEK Ultra Slim Tilting TV Wall Mount for 43–95 inch TVs Holds 150 lbs | 1.2 in Low Profile, 0~-12° Tilt, 4X Safety Tested, Max VESA 800x400mm, Fits 16/18/24 in Wood Studs, Living Room, Home Theater
$44.64

Perlegear Full Motion TV Wall Mount with Power Strip for 47–90 Inch TVs | TV Mount up to 150lbs, Pre-Assembled, USB charging, Smooth Swivel, Tilt, Extension, VESA 600x400mm, 12"/16"/24" Wood Studs
$99.99

monTEK Heavy Duty Tilting TV Wall Mount Bracket for 60-130" TVs, Max 330lbs | Adjustable Low Profile Mount for Flat Curved Screen, Max VESA 1200x600, 4X Load Tested, Fits 16"/18"/24" Wood Studs
$55.99

monTEK No Stud TV Wall Mount for 32-100 Inch TVs, Holds up to 220 lbs, Heavy Duty Studless No Drill TV Mount for Drywall & Concrete, Ultra Slim 0.9" Low Profile, Max VESA 1000x600mm, Renter-Friendly
$29.99

MOUNTUP Ultra Slim TV Wall Mount for Most 37-90 inch TVs, 1.1" Thin Low Profile Full Motion TV Mount Bracket, Dual Swivel Articulating Arms with Tilt, Fits 16" Studs, Max VESA 600x400mm Holds 110lbs
$37.98
