1 / 6Jorgensen 24-Inch Heavy-Duty Bar Clamp Set, 2-Pack
Heavy-Duty Pack: Jorgensen 24-inch bar clamps are a two-piece steel-and-cast-iron set for woodworking, metalworking, and general workshop jobs. The listing specifies a 24-inch maximum opening, a 3-inch throat, and up to 1000 pounds of clamping force, with a sliding head and protective pads.
At a glance
- The 24-inch maximum opening is suited to wider assemblies than shorter clamps can accommodate.
- A sliding head with a multiple-disc clutch is described as locking along the bar for adjustment.
- Protective pads are intended to help avoid scratching work surfaces.
Reference price: $52.99
Price checked: Nov 19, 2026
View offerAhead of Black FridayExplore the selectionOften bought together

JORGENSEN 4-Pack Steel 600LBS Bar Clamps Set, 6" (2) & 12" (2) F-Clamps | Medium-Duty, Wood Working Clamps, Fast-Acting Sliding Head, Multi-Disc Clutch, Rust-Resistant Finish, Protective Soft Pads
$31.61

JORGENSEN 36-Inch Parallel Bar Clamps Set, 2200 lbs Load Limit, 2-Pack | Heavy-Duty Wood Clamps, Cabinet Master Bar Clamps for Woodworking Glue-Up, Quick Release, Spreader Function
$84.99
Pros and cons
Pros
- Two clamps provide a matched pair for holding an assembly at more than one point.
- The listed 24-inch opening and 3-inch throat give buyers clear size references for checking workpiece fit.
- Soft-grip handle and protective pads address handling comfort and surface protection.
Cons
- A 3-inch throat limits how far the clamp can reach across a workpiece from its edge.
Technical specifications
11 specifications| Brand | Jorgensen |
|---|---|
| Clamp style | bar clamp |
| Number of clamps | 2 |
| Maximum opening capacity | 24" |
|---|---|
| Throat depth | 3" |
| Clamping force | up to 1000 lbs |
| Material listed | Cast Iron, High Carbon Steel |
|---|---|
| Sliding-head adjustment | multiple-disc clutch design allows the sliding head to lock securely at any point along the bar |
| Screw | Acme-threaded cold-drawn steel screw |
| Handle | ergonomic soft-grip handle |
| Workpiece pads | Durable protective pads |
What to know before buying
- The 1000-pound figure is the listing's stated clamping force, not an independently verified measurement. Confirm the opening and throat dimensions suit the workpiece before purchase.
Who is it for?
A good fit for
- Woodworkers and carpenters clamping assemblies within the stated 24-inch opening and 3-inch throat.
- Workshop users seeking a two-clamp set for assembly, repair, or general DIY work.
Less suited to
- Projects requiring more than a 24-inch opening or greater than 3-inch throat reach.
- Buyers who need independently verified clamping-force performance.

Customer reviews on Amazon
- 5 stars
76% 76% - 4 stars
24% 24% - 3 stars
0% 0% - 2 stars
0% 0% - 1 star
0% 0%
Aggregate ratings lean positive, with five-star ratings forming the largest category and the rest in the four-star category. The sample is very small and contains no written feedback, so it cannot establish specific strengths or concerns. For buyers, the listed opening, throat depth, and force are more useful for judging fit than ratings alone.
Frequently asked questions
What size workpiece can these clamps accommodate?
The listing states a maximum opening capacity of 24 inches and a throat depth of 3 inches. Check both measurements against your project.
How many clamps are included?
The listing describes a two-piece set.
What is the stated clamping force?
The listing claims up to 1000 lbs of clamping force. This is a product claim, not an independent test result.
How does the sliding head adjust?
The listing describes a multiple-disc clutch that locks the sliding head along the bar, plus an Acme-threaded steel screw for adjustment.

Alternative options

JORGENSEN 2-Pack 12" 600LB Medium Duty Steel Bar Clamps for Woodworking | F-style Clamp, Deep Throat, Fast-Acting Sliding Head, Multi-Disc Clutch, Rust-Resistant Bar, Carpentry Protective Soft Pads
$23.99

VEVOR 36" Bar Clamps for Woodworking, 4-Pack, 600 lbs Load Limit | 2-1/2 inch Depth, Lockable F-Clamp, Cast Iron and Carbon Steel, Easy to Use, Metalworking and DIY Projects
$36.46

Jorgensen 24" E-Z Hold Medium-Duty Bar Clamps, 400 lbs Load Limit, 2-Pack | Expandable Bar Clamps for Woodworking, One-Handed Clamp/Spreader, Quick Release
$55.24

Jorgensen 24-inch Bar Clamps Set, 2-pack Cabinet Master 90° Parallel Clamps | Steel Jaw Bar Clamps for Woodworking, 1500 lbs Clamping Force
$67.99

JORGENSEN 24-Inch Parallel Clamps, 2-Pack Bar Clamps, 2200 lbs Load Limit | Heavy-Duty Wood Clamps, Cabinet Master Bar Clamps for Woodworking Glue-Up, Quick Release, Spreader Function
$76.49

VEVOR 50" Parallel Bar Clamp Set, 1100 lbs Load Limit, 2-Pack | F Clamp for Woodworking or Metal Working, Large Jaw Opening, Even Pressure
$79.90

4-Pack 18 inch Bar Clamps,Long Wood Clamps Heavy Duty Force 600 Lbs Adjustable and ...
$39.99

JORGENSEN E-Z Hold 2-Pack 12" 400LBS Medium Duty Woodworking Bar Clamps | Expandable Clamp & Spreader, One-Handed Operation, F-Style Clamp, Quick Trigger Release
$36.54

JORGENSEN 2 Pack Bench Dog Clamp, 3/4" (19mm) Dog Hole Woodworking Clamp | Aluminum alloy body, non-scratch pad, easy-grip knob, secure workholding for woodworking bench projects
$21.98

Pony Jorgensen 3706-HD Heavy Duty Steel Bar Clamp, Orange, 6-Inch | Clamps, Bar Clamps, 1000 lb, 3 in d throat, jorgensen steel bar clamps are seriously strong
$16.00

JORGENSEN E-Z Hold 4-Pack 6" 200LBS Light Duty Woodworking Bar Clamps | Expandable F Clamp/Spreader, One-Hand Trigger Clamp, Deep-reach Jaw, Reinforced Nylon, Non-marring Pad, for Glue-up & Repair
$25.19

3/4" Bench Dog Clamp, Workbench Hold Down Clamp, 155 Lbs Clamp Force | Dog Hole Cla...
$23.99























