Good Deal PicksDeals for the United States
Search
Product guide

iSpring UVF11A Under-Sink UV Water Filter, 1 GPM

Under-Sink Filter: The iSpring UVF11A is an add-on ultraviolet water-treatment unit designed for installation beneath a sink, including as a final stage in many reverse-osmosis systems. Its flow sensor is claimed to switch the lamp on when water moves, while the listed maximum flow rate is 1 gpm.

At a glance

  • Flow sensor is claimed to switch the UV lamp on and off automatically with water flow, reducing unnecessary run time.
  • Designed as an add-on final treatment stage for many reverse-osmosis systems.
  • The listing specifies a stainless steel chamber and 1/4-inch quick-connect inlet and outlet fittings.
  • Manufacturer claims the lamp lasts 8,000 hours and lists a maximum flow of 1.0 GPM.
Price
$102.85Save 19%

Reference price: $126.99

Price checked: Nov 18, 2026

View offerAhead of Black FridayExplore the selection

Often bought together

Pros and cons

Pros

  • Automatic flow activation avoids running the UV lamp continuously when water is not flowing, according to the product description.
  • Compact listed dimensions can make under-sink placement practical.
  • A stated 1.0 GPM flow rate is suited to point-of-use installation rather than whole-home treatment.

Cons

  • The stated 1.0 GPM maximum may be a limiting factor for buyers expecting high flow, and customer feedback also reports mixed experiences with flow.

Technical specifications

18 specifications
Identity
BrandiSpring
ModelUVF11A
Power and treatment
Power configuration110v
Purification methodReverse Osmosis, Ultraviolet
Maximum flow rate1 gpm
UV lamp power11W
Lamp life listed8,000 hours
Dimensions and installation
Dimensions listed10"L x 2"W x 2"H
Weight listed2 pounds
Installation typeDIY
Inlet and outlet fittings1/4" inlet/outlet quick connect fittings
Operating conditions
Operating pressure range5 - 115 psi
Lower temperature range40 °F
Upper temperature rating100 °F
Supported water TDS level maximum (PPM)10
Materials and features
Material listedStainless Steel
Automatic shut-offAutomatic Shut-Off
Capacity1 gallons

What to know before buying

  • The listing says the unit is compatible with most RO systems and recommends installing it after a storage tank where flow is high enough. Confirm placement, connection fit and suitability for the actual system. The listed maximum supported TDS is 10, so check source-water conditions against that stated limit. Claims about bacteria reduction and water-quality effects are manufacturer statements, not independently established here.

What’s in the box

Included
  • Stainless steel body
  • UV lamp
  • Ballast

Who is it for?

A good fit for

  • RO-system owners seeking an under-sink UV treatment add-on for a compatible point-of-use water line.
  • Buyers who want a flow-activated UV lamp rather than continuous operation.
  • DIY installers comfortable checking water-line fitting and placement requirements.

Less suited to

  • Households seeking a whole-house UV unit or a listed flow capacity above 1 GPM.
  • Buyers who need an all-in-one RO system rather than a separate UV add-on.
iSpring UVF11A Under-Sink UV Water Filter, 1 GPM · photo 2
Additional product photo 2

Customer reviews on Amazon

4.6 / 5 · 1,668 ratings
  • 5 stars82%82%
  • 4 stars9%9%
  • 3 stars2%2%
  • 2 stars1%1%
  • 1 star6%6%

Customer feedback highlights ease of installation and maintenance, compact under-sink placement, and perceived improvements in taste and water quality. These are customer-reported experiences rather than measured results. Reliability and flow feedback is mixed, with some reporting that units stop working and some finding flow lower than expected. The listed maximum of 1 gpm makes flow a practical consideration, especially for buyers integrating it with an RO system.

Positive themes

  • Customers describe installation and maintenance as easy.
  • Customers praise the compact under-sink design and report improved taste and water quality.

Negative themes

  • Some customers report that the unit stops working.
  • Some customers find water flow lower than expected.

Mixed feedback

  • Customer impressions of reliability and flow vary.

Frequently asked questions

Does the UVF11A replace an RO water filter?

No. It is described as an add-on UV stage for many reverse-osmosis systems, typically installed as a final stage.

How does the automatic switch work?

The listing says a flow sensor turns the UV unit on and off with water flow. This limits lamp operation to periods when water is moving.

What flow rate is listed?

The manufacturer lists a maximum flow rate of 1 gpm. This is a point-of-use configuration, not a high-flow whole-house specification.

Where should it be installed with a storage tank?

The listing recommends installing it after the storage tank where water flow is high enough. Check the actual system layout and fittings before installation.

iSpring UVF11A Under-Sink UV Water Filter, 1 GPM · photo 3
Additional product photo 3

Alternative options

Products with discounts that might interest you

4.2
Caehomly CCKJ-MW32N Water Pitcher Replacement Filters, 2-Pack
Caehomly CCKJ-MW32N Water Pitcher Replacement Filters, 2-Pack

$39.99

$35.98

-10%
-10%
Product details in Markdown