1 / 7Inslogic PETG Filament, 1.75 mm, 3 kg Black Bundle
Inslogic PETG filament is a three-spool black bundle for compatible 1.75 mm FDM printers. Its listed 3 kg total suits repeat jobs or projects that use substantial material, while the pre-dried packaging and dimensional-accuracy claims are manufacturer statements rather than independently verified results.
At a glance
- The bundle is described as three 1 kg spools of black PETG, rather than one 3 kg spool.
- The listing claims ±0.02 mm diameter accuracy and low shrinkage, which may matter for repeat prints and fit-testing parts.
- The product is described as pre-dried and vacuum-sealed with desiccant. The listing advises keeping filament dry after opening.
- The manufacturer lists an HDT of 75°C, with performance dependent on test conditions, load, part geometry, and operating environment.
- Compatibility is claimed for most compatible 1.75 mm FDM printers. Check printer material compatibility and recommended PETG settings.
Reference price: $36.99
Price checked: Nov 22, 2026
View offerBlack Friday weekExplore the selectionPros and cons
Pros
- Three separate 1 kg spools make it possible to allocate filament across ongoing or repeat projects.
- PETG's stated toughness and layer adhesion target functional prints such as brackets, holders, and prototypes.
- Pre-dried, sealed individual spools may help manage moisture exposure before opening.
Technical specifications
7 specifications| Brand | Inslogic |
|---|
| Weight listed | 3 kg |
|---|---|
| Filament diameter | 1.75 millimeters |
| Spool bundle | 1kg×3 Petg Black |
| Number of items | 3 |
| Material listed | Polyethylene Terephthalate Glycol |
|---|---|
| Pre-dried before packaging | Each 1kg spool is pre-dried before packaging and vacuum sealed in an aluminum foil bag with desiccant. |
What to know before buying
- The 75°C HDT is a reference under unspecified test conditions, not a guarantee that a printed part will withstand that temperature in use. Keep opened filament dry, and check chemical compatibility for the specific substance and exposure conditions. Claims about printability, toughness, accuracy, and shrinkage are not independently verified.
Who is it for?
A good fit for
- FDM printer owners whose machines accept 1.75 mm PETG and who want three black 1 kg spools.
- Makers producing repeat prints, functional prototypes, workshop aids, or larger projects that use PETG.
Less suited to
- Owners of printers that do not support 1.75 mm filament or PETG.
- Buyers needing a substantiated chemical-compatibility rating or guaranteed performance at a particular temperature.

Customer reviews on Amazon
- 5 stars
71% 71% - 4 stars
20% 20% - 3 stars
9% 9% - 2 stars
0% 0% - 1 star
0% 0%
The supplied evidence contains aggregate ratings but no review-summary details, so it does not establish specific customer-praised strengths or complaints. The overall rating distribution leans positive, with a smaller middle-rating share. That is limited context for a 3 kg filament purchase and does not verify print consistency, moisture protection, or performance in a particular printer.
Frequently asked questions
How much filament is in the bundle?
The listing describes three 1 kg spools, for a stated total of 3 kg.
What printer is this filament for?
It is described for compatible 1.75 mm FDM printers. Check your printer's material compatibility and PETG settings before use.
Does pre-dried mean the filament needs no further moisture care?
No. The listing says each spool is pre-dried and vacuum-sealed with desiccant, and advises keeping filament dry after opening.
Can printed parts safely operate at 75°C?
The manufacturer lists a heat deflection temperature of 75°C, but actual performance depends on test conditions, load, geometry, and environment. This figure alone does not establish a safe operating temperature.

Alternative options

AMOLEN Rapid PETG Filament 1.75mm, Up to 600 mm/s, 2KG Black Bundle | Excellent Toughness, High Precision, Low Odor, Moisture-Resistant, Glossy Finish, Diameter Accuracy ±0.02 mm
$19.99

4KG PETG 3D Printer Filament 1.75mm, Pre-Dried <0.3% Moisture, Low Warping for Func...
$42.49

Kingroon PETG 3D Printer Filament, High Strength, Low Warping, Odorless, Dimensional Accuracy +/- 0.03mm, 1kg Spool(2.2lbs), 1.75mm, Black
$11.72

ANYCUBIC Rapid PETG Filament 1.75mm Bundle, 4KG, Black | 600mm/s High Speed 3D Printer Filament, Water&Weather-Resist, Dimensional Accuracy+/-0.02mm, Print with Most FDM 3D Printers
$43.69

ELEGOO Rapid PETG 3D Printer Filament 1.75mm Black 2 Pack Bundle | Up to 600mm/s High Speed, Enhanced Toughness, Neatly Wound, Reduced Stringing, +/-0.02mm Accuracy, 1kg Spool 3D Filament
$22.08

Pre-Dried PETG Pro Filament 1.75mm, High-Speed, Matte, 1kg, Black | Strong & Tough,...
$13.21

Pre-Dried Matte PLA Filament 1.75mm, 1KG, Black, Architecture Mode | Elegant Matte ...
$14.94

Inslogic Pre-Dried PETG Filament 1.75mm, 3KG Bundle, 3×1KG, Black | Tough & Durable, High Impact Resistant, Easy Printing, Smooth Flow, ±0.02mm Accuracy, Low Shrinkage, Fits Most FDM Printers
$30.69

Inslogic Pre-Dried High Speed Matte PETG Pro Filament 1.75mm 1KG White | Strong & Tough, ±0.02mm Accuracy, Reliable Layer Adhesion, Low Warping, Moisture-Protective Packaging, Fits Most FDM Printers
$13.09

Inslogic Pre-Dried PA12-CF Filament 1.75mm Carbon Fiber Nylon 1KG Black | 20% Carbon Fiber Nylon, Lightweight & High Stiffness, Low Moisture Absorption, Chemical Resistant, Industrial Parts
$59.29

SUNLU High Speed PETG Filament 1.75mm, Black, 4KG Bundle, 4-Pack | 30 - 600mm/s Print Range, 3D Printer Filament Bundle, Rapid PETG, Matte Finish, Fit Most FDM Printers, Bambu Labs Printer etc
$37.90

YOOPAI 2-Pack Cold Build Plate for Bambu Lab X2D/P2S/A1/X1C/P1S, Blue+Green | 257x257mm, Double-Sided Room-Temperature Printing UltraTack Coating High Adhesion Energy-Saving for P1P/X1E
$22.39























