Good Deal PicksDeals for the United States
BlogSearch
Product guide

InnoGear MU-PSA28 Microphone Boom Arm

The InnoGear MU-PSA28 is a desk-clamp microphone boom arm with cable channels and a supplied extension riser. Its listing claims a 3.5-pound load capacity and reach of up to 32.3 inches horizontally, making its stated limits and your desk fit key checks before choosing it.

At a glance

  • Built-in cable channels are accessed by removing the rubber covers, keeping compatible cables routed along the arm.
  • The listing describes a 6.3-inch extension riser and up to 32.3 inches of horizontal reach.
  • The arm uses a desk clamp and a 5/8-inch metal connector.
Price
$37.98Save 24%

Reference price: $49.99

Price checked: Nov 19, 2026

View offerAhead of Black FridayExplore the selection

Often bought together

Pros and cons

Pros

  • Cable channels and rubber covers can help keep a desk microphone setup tidier.
  • A detachable riser and listed 37.4-inch maximum height provide additional positioning options.
  • The listing names several compatible microphones, including Blue Yeti, Shure SM7B and HyperX QuadCast.

Cons

  • Its stated maximum microphone load is 3.5 pounds, which may rule it out for heavier microphone and mount combinations.

Technical specifications

14 specifications
Identity
BrandInnoGear
ModelMU-PSA28
Dimensions and installation
Dimensions listed15.75 x 1.57 x 13.78 inches
Weight listed1.6 kg
BaseClamp
Maximum height37.4 inches
Horizontal reach32.3 inches
Desk thickness limit2 inches
Mounting and capacity
Microphone connector thread5/8 Inch
Maximum recommended microphone weight3.5 pounds
Materials and finish
Material listedAlloy Steel
ColorBlack
Adjustment and cable routing
Arm movement135° back and forth, and 180° up and down
Base rotation360°

What to know before buying

  • The clamp is specified for desks up to 2 inches thick. The 3.5-pound limit applies to the microphone load, so account for any attached mount or accessories when checking fit.

What’s in the box

Included
  • Mic arm stand
  • Extension riser
  • Rubber cable covers
  • Table mounting clamp

Who is it for?

A good fit for

  • Desk-based podcasting, recording or streaming setups using a microphone within the stated 3.5-pound capacity.
  • Buyers seeking cable routing and an extension riser on a clamp-mounted arm.

Less suited to

  • Microphones or complete microphone assemblies exceeding the stated 3.5-pound limit.
  • Desks thicker than the listed 2-inch clamp limit.
InnoGear MU-PSA28 Microphone Boom Arm · photo 2
Additional product photo 2

Customer reviews on Amazon

4.5 / 5 · 1,400 ratings
  • 5 stars77%77%
  • 4 stars12%12%
  • 3 stars5%5%
  • 2 stars2%2%
  • 1 star4%4%

Customer feedback describes the arm as good quality and sturdy, and says its appearance can make a setup look cleaner. Stability, adjustability and clamp strength receive mixed reports, with some customers saying the arm holds and moves easily while others say it slips, is difficult to adjust or has a weak clamp. Those differences matter for positioning a microphone near the stated load limit. The overall rating distribution leans positive, but ratings alone do not establish how it will perform on a particular desk or with a particular microphone.

Positive themes

  • Customers describe the stand as good quality and sturdy.
  • Some customers appreciate its appearance and cleaner-looking setup.

Mixed feedback

  • Customers report differing experiences with stability and whether the arm holds its position.
  • Adjustability and clamp strength receive mixed feedback.

Frequently asked questions

What is the stated weight capacity?

The listing gives a maximum recommended load of 3.5 pounds. Check the combined weight of your microphone and any attached mount or accessories.

How thick can the desk be?

The listing says the clamp can attach to desks up to 2 inches thick.

What microphones does the listing name as compatible?

It names models including Blue Yeti, HyperX QuadCast, Shure SM7B, Shure MV7, AT2020 and Fifine K669B. Check connector and mount requirements for your exact setup.

Does the listing say a shock mount is included?

No shock mount appears in the supplied included-components list. The listing specifically notes a shock mount is not included for the Fifine K669B compatibility example.

InnoGear MU-PSA28 Microphone Boom Arm · photo 3
Additional product photo 3

Alternative options

Products with discounts that might interest you

4.2
TIDRADIO TID-MIC Wearable Bluetooth PTT Speaker Mic
TIDRADIO TID-MIC Wearable Bluetooth PTT Speaker Mic

$39.99

$32.99

-18%
-18%
Product details in Markdown