Good Deal PicksDeals for the United States
BlogSearch
Product guide

Fluke 789 ProcessMeter, DMM and 4–20 mA Loop Calibrator

The Fluke 789 ProcessMeter combines multimeter functions with a loop calibrator for measuring, sourcing, and simulating 4–20 mA signals. Its built-in 24 V loop supply is aimed at loop work where a separate supply would otherwise be needed, while battery-life claims vary substantially across the supplied listing details.

At a glance

  • Combines digital multimeter functions and an mA loop calibrator in one instrument.
  • The listing describes measuring, sourcing and simulating 4–20 mA signals, with a built-in 24 V loop supply.
  • Manufacturer material lists frequency measurement to 20 kHz, diode test, continuity beeper, and Min/Max/Average/Hold/Relative modes.
  • The supplied contents list includes test leads, alligator clips, batteries and a quick reference guide.
Price
$999.00Save 31%

Reference price: $1,444.99

Price checked: Nov 19, 2026

View offer

Often bought together

Pros and cons

Pros

  • Combines loop calibration and general multimeter functions, reducing the need to carry a separate meter for those tasks.
  • Built-in 24 V loop supply supports bench or offline transmitter testing when the transmitter is not powered.
  • Selectable 250-ohm HART resistance is described as built in, avoiding a separate resistor for that use.

Cons

  • Battery-life and battery-configuration claims vary across the supplied listing, so runtime cannot be treated as a single dependable figure.

Technical specifications

19 specifications
Identity
BrandFluke
Model789
Product stylePROCESSMETER
Measurement typeMultimeter
Process and measurement functions
Current measurement range0 to 30 mA DC
Maximum direct current30 milliamps
Frequency measurement20 kHz
Loop supply24 V
Loop resistance250-ohm
Overload protection1000V overload protection on V, Ohms, frequency, and 150V overload protection on mA, backed up by a 440 mA 1000V fuse
Display
Screen technology listedLCD
Display and backlightClear LCD display with Backlight
Power and battery
Power configurationBattery Powered
Battery life, measurement modeRuns about 50 hours typical (measurement), 12 hours typical (sourcing 12 mA) on one 9-volt alkaline battery
Battery life, alternative descriptionThe processmeter runs about 140 hours typical (measurement), 10 hours typical (sourcing 20 ma) on four aa 1.5-Volt alkaline batteries (included).
Dimensions and installation
Dimensions listed9.02 x 15.2 x 2.99 inches
Weight listed0.61 kg
Other listed details
ColorBlack
Upper temperature rating55 °C

What to know before buying

Listing details to confirm

The listing gives conflicting battery details: one claim specifies one 9-volt alkaline battery with about 50 hours in measurement and 12 hours sourcing 12 mA, while another specifies four AA batteries with about 140 hours measurement and 10 hours sourcing 20 mA. Confirm the configuration and applicable revision before purchase.

What’s in the box

Included
  • 1 x Set) AC175 Alligator Clips
  • 1 x Set) TL71 Test Lead Set
  • 4 x AA 1.5 V Alkaline Batteries (installed)
  • Fluke 789 ProcessMeter
  • Quick Reference Guide

Who is it for?

A good fit for

  • Instrumentation technicians calibrating or troubleshooting 4–20 mA control loops who also need multimeter functions.
  • Buyers who need a built-in loop supply for testing transmitters that are not powered.
  • Field users who want the listed loop-calibration functions and DMM capabilities in one battery-powered instrument.

Less suited to

  • Buyers seeking a basic multimeter without loop-calibration functions.
  • Anyone requiring a confirmed single battery-life figure or battery configuration without checking the particular listing.
Fluke 789 ProcessMeter, DMM and 4–20 mA Loop Calibrator · photo 2
Additional product photo 2

Customer reviews on Amazon

4.6 / 5 · 104 ratings
  • 5 stars81%81%
  • 4 stars12%12%
  • 3 stars2%2%
  • 2 stars0%0%
  • 1 star5%5%

Customer feedback highlights perceived quality and functionality, including suitability for process-control work. Opinions on value are mixed, which may matter for buyers weighing a specialized loop calibrator against their needs. The generally favorable aggregate ratings are not a substitute for checking fit, included accessories, and the listing's inconsistent battery details.

Positive themes

  • Customers describe the meter's quality and functionality favorably.

Mixed feedback

  • Feedback on value for money is mixed, with some customers appreciating the price and others finding it pricey.

Frequently asked questions

Can the Fluke 789 measure and source 4–20 mA signals?

The product title and manufacturer details describe 4–20 mA signal measurement, sourcing and simulation. The listing also gives a current measurement range of 0 to 30 mA DC.

Does the 789 include a loop power supply?

Yes. The supplied product information describes a built-in 24 V loop supply for loop testing, including work on transmitters that are not powered.

What batteries does the listing say are used?

The information conflicts. One section describes a single 9-volt alkaline battery, while another describes four AA 1.5-Volt alkaline batteries. Verify the battery configuration for the selected listing.

What accessories are listed in the package?

The explicit contents list names AC175 alligator clips, a TL71 test lead set, four installed AA batteries, the ProcessMeter and a quick reference guide.

Fluke 789 ProcessMeter, DMM and 4–20 mA Loop Calibrator · photo 3
Additional product photo 3

Alternative options

Product details in Markdown