1 / 7FLASHFORGE Adventurer 5M Pro Enclosed CoreXY 3D Printer
The FLASHFORGE Adventurer 5M Pro is a fully enclosed CoreXY 3D printer listing claims can reach print speeds up to 600 mm/s. Its stated 220×220×220 mm build area, automatic bed leveling and remote monitoring features suit buyers looking for a comparatively hands-off setup, while customer feedback also flags inconsistent reliability and filament feeding.
At a glance
- CoreXY motion system with a claimed maximum speed of 600 mm/s and vibration compensation.
- 220×220×220 mm build area and automatic bed leveling are intended to reduce setup work.
- Fully enclosed chamber with dual-layer filtration, according to the listing.
- Built-in camera and remote control through the Maker app and Orca slicer are claimed.
Reference price: $479.00
Price checked: Nov 19, 2026
View offerAhead of Black FridayExplore the selectionPros and cons
Pros
- Automatic bed leveling and the advertised quick-start setup could help first-time users get printing sooner.
- The stated filament range includes flexible TPU as well as PLA, ABS, PETG, ASA and carbon-fiber filaments.
- A built-in camera and app-based remote control provide a way to check and manage prints remotely, as claimed.
Cons
- The 220×220×220 mm build area limits the size of a single print.
- Maximum speed is a listing claim, not a guarantee that every material or print will run at that speed.
Technical specifications
17 specifications| Brand | FLASHFORGE |
|---|---|
| Model | Adventurer 5M pro |
| Color | Black |
| Build area | 220×220×220 mm |
|---|---|
| Maximum listed speed | 600 mm/s |
| Supported filaments | PLA, ABS, PETG, ASA, TPU, and carbon-fiber filaments |
| Nozzle change claim | 3 seconds |
| Nozzle heating claim | 50W |
| Extrusion rate claim | 32 mm³/s |
| Acceleration claim | 20,000 mm/s² |
| Weight listed | 32.2 pounds |
|---|
| Material listed | Metal |
|---|---|
| Enclosure and filtration | Dual-layer filtration |
| Setup claim | 10-minute quick start |
|---|---|
| Monitoring | built-in camera |
| Software | Maker app and Orca slicer |
| Other stated features | Filament runout detection, power-loss recovery, and auto-shutdown |
What to know before buying
Listing details to confirm
Listing details conflict on the exterior dimensions: one entry gives 15.75"D x 14.96"W x 17.83"H, while another gives 15.75 x 14.96 x 17.83 inches without specifying dimension order. Confirm the footprint and orientation before planning space. The listing also does not establish that the maximum speed applies to all print settings or materials.
Who is it for?
A good fit for
- Buyers wanting an enclosed printer with automatic bed leveling and a stated mid-sized build area.
- Users interested in printing flexible and common engineering filaments, subject to suitable settings and materials.
- People who value camera monitoring and remote controls through the named app and slicer.
Less suited to
- Anyone needing a build area larger than 220×220×220 mm.
- Buyers who require consistently trouble-free filament feeding or reliability, given the mixed and negative customer feedback.

Customer reviews on Amazon
- 5 stars
69% 69% - 4 stars
10% 10% - 3 stars
6% 6% - 2 stars
4% 4% - 1 star
11% 11%
Customer feedback includes positive reports about ease of use and print quality, including a report of being ready within minutes. Connectivity and reliability are mixed, with some reports of connection problems and printers stopping after a few prints. Feedback also raises durability, jamming and filament-feeding concerns, while opinions on value vary. These points matter for a printer whose listing emphasizes quick setup and remote monitoring, but they do not establish how any individual unit will perform.
Positive themes
- Customers report ease of use and appreciate print quality.
Negative themes
- Feedback includes complaints about jamming and filament feeding, as well as individual reports of early failure.
Mixed feedback
- Connectivity, reliability, durability and value receive mixed feedback.
Frequently asked questions
What is the listed build area?
The listing states a 220×220×220 mm build area.
Does it support flexible filament?
The listing says the direct-drive extruder handles TPU and lists PLA, ABS, PETG, ASA and carbon-fiber filaments as supported. Actual results depend on filament and print settings.
Can I monitor a print remotely?
The listing describes a built-in camera and remote control through the Maker app and Orca slicer.
How should I interpret the 600 mm/s figure?
It is a stated maximum, not a demonstrated speed for every print. Print material and settings matter, and the listing does not specify a universal operating speed.

Alternative options

FLASHFORGE AD5X Multi-Color & Material 3D Printer with IFS, 220x220x220mm | 4-Color Printing, 600mm/s High Speed,300°C High Temp Direct Extruder,CoreXY & Auto Bed Leveling, Ideal For PLA-CF,PETG-CF
$329.00

FLASHFORGE AD5X 3D Printer for PLA-CF,PETG-CF, Print Size 220x220x220 mm | Smart Multi-Color with IFS, Max 600mm/s High Speed 4 Colors Printing, CoreXY & Fully Auto Leveling, 300°C Direct Extruder
$329.00

FLASHFORGE AD5X 3D Printer,Multi-Color Printing, 220x220x220mm Build Volume | Max 6...
$329.00

FLASHFORGE Adventurer 5M 3D Printer, All-Metal CoreXY, 600mm/s Max Travel | Beginner-Friendly, One-Click Auto Leveling, 280°C Direct Drive Extruder, 3-Second Nozzle Swap, 220x220x220mm Build Volume
$236.00

FLASHFORGE Creator 5 Pro Industrial 3D Printer, 65°C Active Heated Chamber, HEPA13 Air Filtration, 4-Extruder Independent System, 600mm/s High-Speed Printing, 256mm³Build Volume
$749.00

Anycubic Kobra S1 Max Combo 3D Printer, Large Build Size 350x350x350 mm³ | Enclosed CoreXY System,Native 4 Color with ACE 2 Pro, 600mm/s High Speed for Engineer and Designer to Build Functional Parts
$799.99

Snapmaker U1 3D Printer,4-Toolhead with 5s Toolchanger,Multi-Color Printing | 5X Fast Printing,Minimal Purge,Multi-Material Printing,Smart Calibration,Model Library,Beginner Friendly,Auto Filament System
$699.00

FLASHFORGE AD5X Multi-Color 3D Printer, Built-In 4-Color IFS | CoreXY 600mm/s High-Speed, 1-Click Auto Leveling, 300°C Hotend, 220x220x220mm Build Volume, Precise and Efficient Printing
$329.00

FLASHFORGE Adventurer 5M Pro 3D Printer with Camera & Light | Full Enclosed≤50 dB, CoreXY 600mm/s High-Speed, Auto Bed Leveling, 280°C Quick Detachable Nozzle,Print Size 220x220x220mm
$359.00

Anycubic Kobra X Multicolor 3D Printer, Easy One-Click Printing | 2X Faster, 600mm/s High Speed 3D Printers for Beginners & Family, 4-Color Built-in, 260x260x260m³, Easy to Use FDM 3D Printer
$284.99

FLASHFORGE AD5M Pro 3D Printer – 600mm/s High-Speed Core XY, 1-Click Auto Leveling, ≤50dB Quiet Printing with Camera, 0.4&0.6mm Nozzle, Auxiliary Cooling, 220x220x220mm Build Volume
$359.00

FLASHFORGE Adventurer 5M Pro 3D Printer with 1 Click Auto Printing System | 600mm/s High-Speed, Quick Detachable 280°C Nozzle, Core XY All-Metal Structure, Multi-Functional 220x220x220mm 3D Printer
$359.00























