1 / 7FLASHFORGE Adventurer 5M CoreXY 3D Printer, 220 × 220 × 220 mm
FLASHFORGE Adventurer 5M is an open-frame CoreXY 3D printer listed with a 220 × 220 × 220 mm build volume, automatic one-click leveling and a direct-drive extruder. Its speed and calibration features may suit rapid prototyping, while customer feedback includes concerns about reliability and durability.
At a glance
- One-click automatic leveling is intended to simplify bed setup.
- CoreXY motion is listed with a maximum speed of 600mm/s and acceleration up to 20000 mm/s².
- The listing describes quick-change nozzles, vibration compensation, filament detection and power recovery.
- The flexible removable PEI steel plate is described as supporting easier print removal.
- Nozzle diameter options and stated filament compatibility depend on nozzle size.
Pros and cons
Pros
- Automatic one-click leveling can reduce manual calibration steps.
- The stated range of nozzle sizes supports choosing between finer detail and higher-efficiency modes.
- The removable PEI platform and filament detection are useful workflow features, according to the listing.
Cons
- This is an open printer, and the listing specifies use in an open, well-ventilated environment.
Technical specifications
16 specifications| Brand | FLASHFORGE |
|---|
| Material listed | Metal |
|---|---|
| Frame style | Open 3D printer |
| Build volume | 220x220x220mm |
|---|---|
| Maximum speed claimed | Max 600mm/s |
| Maximum acceleration claimed | 20000 mm/s² |
| Maximum nozzle flow claimed | 32mm³/s |
| Extruder | Direct Drive Extruder |
| Leveling | 1-Click Auto Leveling |
| Nozzle options | 0.25/0.4/0.6/0.8 mm |
| Quick nozzle change claim | 3 seconds |
| Warm-up claim | 35-second warm-up to 200°C |
| Platform | Dual-sided PEI platform |
| Materials with 0.4 mm nozzle | PLA/PETG/TPU |
|---|---|
| Materials with 0.6 mm nozzle | PLA-CF/PETG-CF |
| Operating environment | Suitable for use in open and, well-ventilated environments |
What to know before buying
Listing details to confirm
The listed dimensions and weight are inconsistent: two different size measurements and two different weights appear. Confirm the selected listing's actual unit measurements before planning a work surface or transport. The claimed speed and performance figures are manufacturer listing claims, not independent measurements.
Who is it for?
A good fit for
- Makers who want an open-frame printer with automatic leveling and a stated 220x220x220mm build volume.
- Users printing listed PLA, PETG or TPU with a 0.4mm nozzle, or PLA-CF and PETG-CF with a 0.6mm nozzle.
- Rapid prototyping and DIY printing where quick nozzle changes and multiple nozzle sizes are useful.
Less suited to
- Buyers who need an enclosed printer or do not have a suitable well-ventilated workspace.
- Buyers who require confirmed dimensions and weight before purchase, unless they can verify the chosen listing details.

Customer reviews on Amazon
- 5 stars
66% 66% - 4 stars
10% 10% - 3 stars
4% 4% - 2 stars
6% 6% - 1 star
14% 14%
Customer feedback highlights positive experiences with print quality, ease of setup and speed, while reliability and durability reports are mixed or negative and opinions on value differ. Those concerns matter for buyers planning frequent or extended printing, even though the listing claims filament detection and power recovery. The aggregate ratings also include a substantial one-star share, so the overall positive comments should not be read as a guarantee of consistent long-term operation.
Positive themes
- Customers describe clean print results and say setup is easy.
- Some customers report that the printer feels fast.
Negative themes
- Some customers report failures after a few months, and durability concerns are also mentioned.
Mixed feedback
- Reports on reliability vary, with some describing flawless operation and others reporting problems.
- Opinions on value for money are divided.
Frequently asked questions
What is the Adventurer 5M's listed build volume?
The product title lists a 220x220x220mm build volume.
Which filaments does the listing say it supports?
It lists PLA, PETG and TPU with a 0.4mm nozzle, and PLA-CF and PETG-CF with a 0.6mm nozzle.
Does it need a well-ventilated space?
Yes. The listing identifies it as an open 3D printer suitable for use in open, well-ventilated environments.
Are the printer's dimensions and weight clear?
No. The listing gives two different dimension entries and two different weight entries, so confirm the details for the selected listing before buying.

Alternative options

FLASHFORGE Adventurer 5M 3D Printer, All-Metal CoreXY, 600mm/s Max Travel | Beginner-Friendly, One-Click Auto Leveling, 280°C Direct Drive Extruder, 3-Second Nozzle Swap, 220x220x220mm Build Volume
$236.00

FLASHFORGE AD5X 3D Printer,Multi-Color Printing, 220x220x220mm Build Volume | Max 6...
$329.00

FLASHFORGE AD5X 3D Printer for PLA-CF,PETG-CF, Print Size 220x220x220 mm | Smart Multi-Color with IFS, Max 600mm/s High Speed 4 Colors Printing, CoreXY & Fully Auto Leveling, 300°C Direct Extruder
$329.00

Creality SPARKX i7 3D Printer with AI Camera Monitoring, Auto Leveling, Quiet High-Speed Desktop Printing, Easy Setup, Direct Drive Extruder, WiFi Connectivity, 260×260×255mm Build Volume
$199.00

FLASHFORGE Adventurer 5M 3D Printer,Support Multi Materials, High Precision | 600mm/s Max Speed, CoreXY & Auto Bed Leveling, 280°C Direct Extruder, 3s Detachable Nozzle, Effective Cooling,220x220x220mm
$236.00

FLASHFORGE AD5M Pro with 250g PLA 3D Printer, 600mm/s High Speed CoreXY | High Precision Printing, 280℃ Quick-Swap 0.4 & 0.6mm Hotend, 50dB Silence and Built-in Camera, Build Volume 220 * 220 * 220mm
$359.00

FLASHFORGE 5M Pro 3D Printer 600mm/s High Speed & Precision, Full-Auto Calibration with 0.4&0.6mm Nozzle Bundle, CoreXY Structure & Auxiliary Chamber Cooling, ≤50 dB Quite Printing Camera Printers
$359.00

TINA2 Plus Beginner 3D Printer Friendly for Kids, Fully Assembled | Ready to Use, A...
$219.54

FLASHFORGE AD5X Multi-Color 3D Printer, Built-In 4-Color IFS | CoreXY 600mm/s High-Speed, 1-Click Auto Leveling, 300°C Hotend, 220x220x220mm Build Volume, Precise and Efficient Printing
$329.00

TINA2C 3D Printer Beginner Friendly, Easy-Ready to Print in 5 Mins | Fully Assemble...
$169.99

SUNLU 16 Colors PLA Filament Bundle 1.75mm, 3D Printer Filament | 250g per Spool, 16 Rolls, Neatly Wound, Individually Vacuum Packed, 4kg Total
$60.79

UGUESS PLA+ Silk 3D Printer Filament Bundle, 1.75mm Tri Colors PLA+, 250g×6 | 6 Packs Shiny Silk PLA+ Filament Bundle, Beginner Friendly Multicolor Bundle, Easy Printing, Fits with Most FDM 3D Printers
$29.99























