1 / 7ECCPP CV Axle Assembly for 2007–2012 Yamaha Big Bear 400
ECCPP CV Axle Assembly is listed as a front-left replacement for 2007–2012 Yamaha Big Bear 400 4WD models. Its fitment range and OE references are useful starting points, but verify your exact year, trim, position, and part numbers before ordering.
At a glance
- Listed for the front-left position on Yamaha Big Bear 400 4WD models from 2007–2012.
- The listing provides OE numbers, spline counts, and compressed length to help compare against the existing axle.
- ECCPP describes the shaft as Cr-Moly steel.
Pros and cons
Pros
- Front-left position and specific spline and length details make it easier to check against a replacement requirement.
- The listing supplies two OE reference numbers for compatibility cross-checking.
Technical specifications
10 specifications| Brand | ECCPP |
|---|---|
| Model | cv axle |
| Position | Front left |
| OE numbers | 4S2-2511E-00-00,4S2-2511E-01-00 |
| Inboard splines | 21 |
|---|---|
| Outboard splines | 27 |
| Compressed length | 484mm |
| Shaft material | Cr-Moly steel |
| Dimensions listed | 21.06 x 4.13 x 4.13 inches |
|---|---|
| Weight listed | 6.98 pounds |
What to know before buying
- Fitment is limited by the listing to 4WD. Confirm your exact year, make, model, trim, and engine before ordering, and compare OE numbers and axle dimensions with the part being replaced. The listing calls the model “cv axle” and item model number “Adjustable,” so those identifiers do not clarify a more specific model.
Who is it for?
A good fit for
- Owners of a 2007–2012 Yamaha Big Bear 400 4WD who need a front-left CV axle and can verify the listed fitment details.
- Buyers comparing spline counts, compressed length, and OE references before selecting a replacement.
Less suited to
- Owners of 2WD models, other vehicle models, or buyers needing a position other than front left.

Frequently asked questions
Which Yamaha models does this axle listing cover?
It lists Yamaha Big Bear 400 models from 2007–2012 and specifies 4WD only. Verify your exact vehicle details and OE references before ordering.
Which side and position is this axle for?
The listing specifies front left. It does not establish fitment for another position.
What dimensions and spline counts are listed?
The listing gives 21 inboard splines, 27 outboard splines, and a compressed length of 484mm.
Which OE numbers are provided?
The listing names 4S2-2511E-00-00 and 4S2-2511E-01-00. Compare them with the part required for your exact ATV.

Alternative options

SCITOO CV Axle Shaft Assembly 2002-2006 fits for Yamaha Big Bear 400 Front Left Right 5FU-F510F-00-00 5GH-2510J-00-00
$101.98

ECCPP CV Axle Drive Shaft Assembly fit 2007-2012 for Yamaha Big Bear | 400 Rear right 4S1-2530T-00-00,4S1-2530V-00-00,93305-00602-00
$56.25

CV Axle Drive Shaft Rear -fit 2007-2012 for Yamaha Big Bear | 400 Rear Left 4S1-2530T-00-00, 4S1-2530V-00-00
$49.99

A-Premium CV Axle Shaft Assembly Compatible with Yamaha | for Big Bear 400 2007-2011, Grizzly 350 2007-2011, Grizzly 450 2008-2010, Replace# 4S1-2510F-00-00, 4S1-2511E-00-00
$74.49

ECCPP CV Axle Drive Shaft Assembly fit 2007-2009 for Honda TRX 420 | Front Left Right 44250-HP5-601 44220-HP5-601
$50.75

ECCPP CV Axle Drive Shaft Assembly fit 2003-2008 for Yamaha Grizzly 660 | Rear Right 5KM-2530T-13-00
$51.29

NICHE Front CV Axle Drive Shaft for Yamaha 4S1-2511E-00-00 4S1-2510J-01-00 | For Yamaha, Fits 2007-2011 Big Bear 400, 2007-2011 Grizzly 350, 2008-2011 Grizzly 450, Replaces 4S1-2511E-00-00
$79.95

NICHE High Strength Front Axle for Yamaha 5FU-F510F-00-00 2 Pack | For Yamaha, Fits 2002-2006 Big Bear 400 YFM400, Replaces 5FU-F510F-00-00, 5GH-2510J-00-00
$117.95

NICHE Front CV Axle Drive Shaft for Yamaha 4S1-2510F-01-00 4S1-2510J-01-00 | For Yamaha, Fits 2008-2012 Big Bear 400, 2008-2011 Grizzly 450; 2010 Grizzly 350, 2008 Wolverine 450
$79.95

RUGGED Performance Axle for 2007-2008 Yamaha YXR45F Rhino 450 Special Edition Rear Right OEM: 5UG-F53B0-21-00
$195.00

H6M P15D Fog Bulbs Compatible for Yamaha Bear Tracker 250 1999 2000 2001 2002 2003,...
$21.61

NICHE Front CV Axle Drive Shaft for Yamaha 4KB-2510F-00-00 2 Pack | For Yamaha, Fits 1995-2000Wolverine 350, 1997-1999 Big Bear 350 YFM350FWB, 2000 Big Bear 400, 1999 Kodiak 400
$119.95























