Good Deal PicksDeals for the United States
BlogSearch
Product guide

Dynofit 8N003P-24 Extended Spline Lug Nuts, M12 x 1.5, 24-Pack

Pack: Dynofit 8N003P-24 extended spline lug nuts are a 24-piece set listed for aftermarket wheels with M12 x 1.5 threads and a 60-degree conical seat. The listing says they are not for factory OEM wheels, so confirm thread, seat, wheel fit and required shank length before ordering.

At a glance

  • Extended, closed-end design listed for aftermarket wheels, with a 60-degree conical seat.
  • The listing names Toyota 4Runner and Tacoma among compatible vehicles, but fit depends on the wheel's thread and seat requirements.
  • A socket key is identified in the installation description, which recommends hand-wrench use rather than an impact tool.
Price
$33.99Save 15%

Reference price: $39.99

Price checked: Nov 19, 2026

View offer

Often bought together

Pros and cons

Pros

  • The 24-piece set is suitable for a six-lug setup when all wheel and vehicle fit requirements match.
  • Extended length is presented for aftermarket wheels and for certain spacer setups where the original nuts are too short.
  • Spline drive and a specified 60-degree conical seat give buyers useful fitment details to compare against their wheel.

Cons

  • The listing explicitly says these are not compatible with factory OEM wheels.

Technical specifications

20 specifications
Identity
Branddynofit
Model8N003P-24
Fit and installation
Thread sizeM12 x 1.5
Thread styleRight Hand
Thread coverageFully Threaded
Seat60 Degree conical
Drive styleSpline
Compatible groove diameter21 millimeters
Outside diameter20 millimeters
Item diameter12 millimeters
Overall lengthOverall length: 1.69”(43mm)
Shank length7.6mm
Materials and finish
Material listedAlloy Steel
Exterior finishPassivated
Finish typeBlack Plated
ColorBlack
Grade ratingClass 10.9
Thread classHigh Strength
Dimensions and quantity
Dimensions listed7.48 x 5.71 x 1.97 inches
Number of pieces24

What to know before buying

  • The listing specifies aftermarket wheels only and advises against impact tools. It describes spacer use for 10–15 mm spacers, but confirm the actual wheel, spacer, stud engagement and vehicle requirements before installation. The title's 7.6 mm shank detail is not reconciled with the listed overall length of 1.69 inches (43 mm).

Who is it for?

A good fit for

  • Owners whose aftermarket wheels require M12 x 1.5 threads, a 60-degree conical seat and an extended spline-drive lug nut.
  • Buyers looking for a 24-piece set for a six-lug wheel configuration, after confirming vehicle-specific fitment.

Less suited to

  • Owners retaining factory OEM wheels, which the listing says these nuts do not fit.
  • Buyers whose wheel requires a different thread pitch, seat shape or lug-nut length.
Dynofit 8N003P-24 Extended Spline Lug Nuts, M12 x 1.5, 24-Pack · photo 2
Additional product photo 2

Customer reviews on Amazon

4.5 / 5 · 320 ratings
  • 5 stars76%76%
  • 4 stars11%11%
  • 3 stars7%7%
  • 2 stars2%2%
  • 1 star4%4%

Customer feedback reports favorable impressions of fit, functionality, quality and appearance, while also raising concerns about nuts loosening and rusting. Those reports matter for wheel hardware, but they do not establish whether a particular vehicle and wheel combination fits. The listing's stated aftermarket-only use, M12 x 1.5 thread and 60-degree conical seat remain essential fit checks.

Positive themes

  • Customers report good fit and functionality, and some say the appearance is pleasing.

Negative themes

  • Customer feedback includes reports of lug nuts loosening and rusting.

Mixed feedback

  • Positive quality and fit impressions coexist with durability and rust-resistance concerns.

Frequently asked questions

Are these lug nuts intended for factory wheels?

No. The listing says this extended style is intended for aftermarket wheels and does not fit factory OEM wheels.

What fitment should I verify before ordering?

Confirm M12 x 1.5 threads, a 60-degree conical seat, the required nut length and fit for your wheel and vehicle. The listing names several vehicle models, but that alone does not confirm fit.

Can these be used with wheel spacers?

The listing describes using them with 10–15 mm spacers when the original lug nuts are too short. Confirm suitable thread engagement and fit for your specific setup.

What installation method does the listing recommend?

It recommends hand-wrench installation and says not to use an impact tool.

Dynofit 8N003P-24 Extended Spline Lug Nuts, M12 x 1.5, 24-Pack · photo 3
Additional product photo 3

Alternative options

Products with discounts that might interest you

4.5
Calmara Y34 Portable Tire Inflator, 150 PSI
Calmara Y34 Portable Tire Inflator, 150 PSI

$35.99

$34.18

-5%
-5%
Product details in Markdown