Good Deal PicksDeals for the United States
BlogSearch
Product guide

Comgrow SH01 Filament Dryer Box, 2-Spool Capacity

Capacity: Comgrow SH01 is a filament dryer and storage box designed to dry filament during printing and hold up to two 1 kg spools. Its listed temperature range is limited to 40°–50°C, so check whether that suits the filament types and drying routine you use.

At a glance

  • Heats filament during printing and is also described as a storage box.
  • A 2-inch LCD and touch buttons display temperature and humidity, with selectable temperature and drying time.
  • The listing says it can hold two 1 kg spools, subject to spool-width limits.
  • A silicone-sheathed outlet and Teflon tube guide filament, and the outlet can be plugged when not in use.
Price
$39.99Save 20%

Reference price: $49.99

Price checked: Nov 19, 2026

View offer

Pros and cons

Pros

  • The two-spool capacity can reduce the need to swap filament boxes between prints, if both spools meet the stated width limit.
  • Temperature and humidity monitoring plus adjustable heat and timer settings offer control over the listed drying cycle.
  • The outlet is designed to feed filament during printing and close when the box is idle.

Cons

  • The highest listed setting is 50°C, which may not meet every filament manufacturer's preferred drying conditions.

Technical specifications

12 specifications
Identity
BrandComgrow
ModelAK36WG-1200400J
Drying and controls
Screen technology listedLCD
Temperature settings40°, 45°, 50°C
Timer settings6 hours to 12 hours
Capacity and compatibility
Storage capacity2 rolls of 1kg spools
Spool width2 rolls of filaments with a width of less than 70mm at the same time or 1 roll of filaments with a width of less than 150mm
Supported filament diameters1.75mm/2.85mm
Dimensions and installation
Inner size9.29*6.49*9.13 inch
Weight listed1.5 kg
Materials and protection
Material listedPolylactic Acid
ColorTransparent

What to know before buying

Listing details to confirm

The box is described as sealed for storage, but its moisture-drain hole must be open while drying and closed when idle. Set the temperature and duration, then confirm the work state appears on screen, as the listing says the unit shuts down after three minutes if it does not. The listing gives two-spool capacity for 1 kg rolls and separately specifies spool-width limits, so check your spool dimensions before purchase. Claims about suitability across filament types are not accompanied by material-specific drying settings.

Who is it for?

A good fit for

  • 3D printer owners who want a heated filament enclosure that feeds filament during printing.
  • Users storing or drying up to two spools that fit the stated width limits.
  • Buyers who want adjustable temperature and timer settings with a temperature and humidity display.

Less suited to

  • Users needing drying temperatures above 50°C.
  • Anyone needing a package with explicitly documented accessories, since no package contents are listed.
Comgrow SH01 Filament Dryer Box, 2-Spool Capacity · photo 2
Additional product photo 2

Customer reviews on Amazon

4.4 / 5 · 4,719 ratings
  • 5 stars71%71%
  • 4 stars13%13%
  • 3 stars7%7%
  • 2 stars3%3%
  • 1 star6%6%

Customer feedback reports effectiveness, particularly for drying PETG, while opinions on build quality and value are mixed. That reported effectiveness may matter to buyers seeking an enclosed drying setup, but the listing's 40°–50°C range and 6–12 hour timer should be compared with the needs of their filament. Aggregate ratings lean positive overall but do not establish performance for every material or explain individual experiences.

Positive themes

  • Customers report that the dryer is effective, with PETG drying mentioned particularly.

Mixed feedback

  • Feedback on quality is mixed.
  • Feedback on value for money is mixed.

Frequently asked questions

How many spools can the Comgrow dryer hold?

The listing says it holds two 1 kg spools, with a width under 70 mm each, or one spool under 150 mm wide. Check your spool dimensions against these limits.

What temperature and timer settings are listed?

The listed temperature settings are 40°, 45°, and 50°C, and the drying time can be set from 6 to 12 hours.

Can filament feed from the box while printing?

Yes, the product is described as drying filament during printing through an outlet with a silicone cable sheath and Teflon tube. The listing says to open the sealing hole while drying so moisture can drain.

Does the listing confirm what accessories come in the package?

No package contents are provided, so included accessories are not established.

Comgrow SH01 Filament Dryer Box, 2-Spool Capacity · photo 3
Additional product photo 3

Alternative options

Product details in Markdown