1 / 7Chitu Systems Hoopat X4H Quick-Release Resin Vat for ELEGOO Saturn 4 Ultra 16K
Chitu Systems Hoopat X4H is a quick-release resin vat listed for the ELEGOO Saturn 4 Ultra 16K. Its locking design and pre-holed PFA release film with a seal ring are intended to simplify film replacement, though buyers should confirm compatibility and the correct film revision before ordering.
At a glance
- Locking quick-release construction is designed to let users swap the release film without screws.
- Pre-holed PFA film is described as avoiding the need to trim the vat edges after installation.
- The listing says the new film includes a seal ring and can also work with older Hoopat vats.
Pros and cons
Pros
- Quick-release film retention may make routine film replacement less involved than a screw-based setup.
- Pre-holed film removes the listed need for edge trimming during installation.
- The stated printer fit is specific to the ELEGOO Saturn 4 Ultra 16K.
Technical specifications
10 specifications| Brand | chitu systems |
|---|---|
| Model | Hoopat X4H |
| Compatible printer listed | ELEGOO Saturn 4 Ultra 16K 3D Printers |
| Release film | Pre-Holed PFA Release Film |
|---|---|
| Film seal | Seal Ring |
| Construction | All-in-one metal construction |
| Quick-release design | locking quick release construction |
| Screen technology listed | LCD |
|---|
| Package dimensions | 12.6 x 8.27 x 2.36 inches |
|---|---|
| Weight listed | 1.98 pounds |
What to know before buying
Listing details to confirm
The listing gives two different film-change times, 30 seconds in a feature claim and 1 minute in the title, so treat the swap time as an estimate. It also calls the film pre-holed and says it avoids edge trimming, but does not specify the complete installation procedure. The new seal-ring film is described as compatible with older Hoopat vats, while older film without a seal ring is not recommended for this new vat. Confirm the exact vat and film revision before purchase. For the Saturn 4 Ultra 16K, the maker says the bottom probe must align with the heating element on the right side of the LCD during installation.
Who is it for?
A good fit for
- ELEGOO Saturn 4 Ultra 16K owners seeking a quick-release resin vat and a simpler release-film replacement process.
- Users who prefer pre-holed PFA film rather than trimming film edges during installation.
Less suited to
- Owners of other printer models unless compatibility with their exact model is confirmed.
- Buyers intending to use older Hoopat release film without a seal ring in this updated vat.

Customer reviews on Amazon
- 5 stars
63% 63% - 4 stars
15% 15% - 3 stars
9% 9% - 2 stars
2% 2% - 1 star
11% 11%
Customer feedback highlights the concept, ease of use, and functionality, including a reported five-minute film change. That supports considering it for owners who value simpler film replacement, though it is customer feedback rather than a verified setup time. The overall rating distribution is mostly five-star but includes a smaller spread of lower ratings, so experiences are not uniformly positive.
Positive themes
- Customers praise the resin tank concept.
- Customer feedback describes it as easy to use.
- Customers report positive impressions of its functionality.
Frequently asked questions
Which printer is the Hoopat X4H listed for?
The listing names the ELEGOO Saturn 4 Ultra 16K. It does not establish compatibility with other printer models.
Does the vat use pre-holed PFA film?
Yes, the listing specifies pre-holed PFA release film and a seal ring. It says this design avoids trimming the vat edges after installation.
Can the new film be used with an older Hoopat vat?
The listing says the new film with a seal ring can be used with an older Hoopat vat. It does not recommend using older film without a seal ring in the new Hoopat vat.
How long does a film swap take?
The listing is inconsistent: its feature text claims 30 seconds, while the title says 1 minute. Treat both as estimates rather than a guaranteed change time.

Alternative options

FLASHFORGE AD5X Enclosure Kit, DIY Colors & Style, Optimized Design, Reduced Noise and Odor, Suitable for High-Temperature Filament Printing
$36.75

58Pcs 3D Printer Tools Kit with Storage Case, 3D Printer Accessories - Deburring To...
$23.99

Comgrow PLA 3D Printer Filament, 3D Printer PLA Filament 1.75mm, Dimensional Accuracy +/- 0.02 mm, 1KG Spool PLA Red
$14.24

ANYCUBIC Wash and Cure Station 3.0, Washing Size 165 x 100 x 180 mm | Post-Process for Most LCD/SLA/MSLA/DLP Resin 3D Printer, Detergent Saving & Dual Cleaning and Curing Models
$85.49

ELEGOO ABS-Like 3.0 Pro 3D Printer Resin Clear Green 1000g | Higher Scratch-Resistance 3D Printing Photopolymer Resina for MSLA/DLP/LCD Printers, High Precision, Non-Brittle
$17.09

Resin Drill 3D Printed Resin Cured Sanding and Polishing Tool Kit | Mini Tepy-C Cor...
$20.51

2PCS FEP Release Films Replacement for Anycubic Photon Mono 2 / Mono 4, Integrated ...
$10.76

5PCS FEP Release Film for Anycubic Photon Mono 2K/4K,Photon Ultra,Photon D2 | 197x131mm Pre-Installed FEP Release Film,Integrated Design,Quick Replacement,High Transmittance Resin Vat FEP Film
$21.59

2PCS FEP Release Films Replacement for ELEGOO Saturn 4 / Saturn 4 Ultra 12K | Integ...
$24.99

ANYCUBIC ABS-Like Resin Pro 2 Bundle, Upgraded 8K 3D Printer Resin with Enhanced Strength and Toughness, Wide Compatibility for All LCD Resin 3D Printers (4Packs*1kg Grey, 4kg in Total)
$50.34

Chitu Systems 3D Printer Mini Heater-Resin & FDM 3D Printer Chamber Heater | Easy Installation, High-Performance Fan, Overheat Protection, Compatible with Bambu Lab P1P/P1S/X1,Snapmaker U1
$51.99

ELEGOO Mars 5 Ultra Resin 3D Printer | 7" 9K Mono LCD, Smart Automatic Leveling, Intelligent Detection, Wi-Fi Transfer, Printing Size of 6.04 × 3.06 × 6.49 inch
$284.99