1 / 7Bosch PTBX12 1/2 in. x 5 in. Porcelain Tile Drill Bit
Bosch PTBX12 is a carbide-tipped porcelain tile drill bit with a 1/2-inch diameter and 5-inch overall length. Its hex shank is described as compatible with impact drill/drivers and three-jaw chuck drill/drivers, while the listing claims an arrow-shaped head and centering zone for easier positioning.
At a glance
- Carbide tip is described as optimized for ceramic tile drilling, with a stated claim of up to 5X more life than Bosch glass and tile drill bits.
- Arrow-shaped head and enhanced centering zone are presented as aids to drilling and positioning.
- Impact-rated hex shank is listed for use with impact drill/drivers and three-jaw chuck drill/drivers.
Often bought together

6 Pcs Dry Diamond Drill Bit Set for Tile,Ceramic,Glass,1/4",5/16",3/8",1/2" | Hex Shank Drill Bits for Porcelain,Tile,Ceramic,Pot,Planter,Glass,Granite,Masonry,Hard Stone,with Ti&Tungsten Carbide Bit
$14.99

DKIBBITH 7 Pack Dry Diamond Drill Bits & Tile Drill Bits Set for Ceramic, Porcelain, Marble, Granite, Stone, Glass - Round Shank 3/16", 1/4"(x2), 5/16", 3/8", 1/2"+1 Pack Drill Bit 1/4"
$14.99
Pros and cons
Pros
- A 1/2-inch cutting diameter and 5-inch overall length are specified for buyers sizing a hole and bit reach.
- Hex shank compatibility is claimed for both impact drill/drivers and three-jaw chuck drill/drivers.
- The listed compatible surfaces include porcelain, tile, marble and granite.
Technical specifications
11 specifications| Brand | Bosch |
|---|---|
| Model | PTBX12 |
| Diameter | 0.5 inches |
|---|---|
| Overall length | Measurements - 1/2 In. bit diameter with 5 In. overall length |
| Shank type | Hex |
| Weight listed | 1.44 ounces |
| Material listed | Carbide |
|---|---|
| Cutting angle | 120 degrees |
| Flute type | Straight |
| Number of flutes | 2 |
| Surface recommendations | Concrete, Masonry, Porcelain, Stone, Tile |
What’s in the box
Included- 1 bit
Who is it for?
A good fit for
- Buyers drilling 1/2-inch holes in porcelain or ceramic tile who want a dedicated carbide bit.
- DIYers looking for a tile bit with a hex shank for an impact drill/driver or three-jaw chuck drill/driver.
- Projects involving tile, marble, granite, stone, masonry or concrete, consistent with the listed surface recommendations.
Less suited to
- Buyers who need a different hole diameter or a multi-size bit set.
- Anyone who needs independently established durability or performance results rather than manufacturer claims and mixed customer feedback.

Customer reviews on Amazon
- 5 stars
70% 70% - 4 stars
10% 10% - 3 stars
8% 8% - 2 stars
4% 4% - 1 star
8% 8%
Customer feedback reports positive experiences with quality and drilling, including use on bathroom tile and a report of drilling 5/16-inch porcelain tile. Durability and ceramic or stone compatibility are mixed, with some customers describing longer life and successful porcelain drilling while others report problems on porcelain. Value opinions also differ. These reports matter for a bit marketed for hard tile, but do not establish consistent results across materials or jobs.
Positive themes
- Customer feedback describes quality and drilling performance favorably, including successful bathroom-tile use.
Mixed feedback
- Durability and porcelain or stone compatibility receive mixed feedback, ranging from longer-lasting and effective to reports that the bit did not work on porcelain.
- Value opinions are divided.
Frequently asked questions
What size is the Bosch PTBX12?
The listing specifies a 1/2-inch bit diameter and 5-inch overall length. Its cutting diameter and minimum bore diameter are both listed as 0.5 inches.
What materials is this bit intended for?
The listing names porcelain, tile, stone, masonry and concrete, and describes drilling in porcelain, ceramic, marble and granite tile.
Which drill chucks does the PTBX12 fit?
The manufacturer claims its impact-rated hex shank is compatible with impact drill/drivers and three-jaw chuck drill/drivers.
What does customer feedback say about performance?
Feedback reports successful use on bathroom tile and some porcelain, but durability and compatibility opinions are mixed. Treat the stated bit design and performance claims as listing claims, not guaranteed results.

Alternative options

1-1/4 INCH Wet Diamond Core Drill Bit, 1-1/4" Thread, 14" Drilling Depth, Fast-Cutt...
$38.99

DECKRKAT 10-Piece Dry Diamond Drill Bits & Tile Drill Bits Set,Hex Shank | 3/16"(x2),1/4"(x2),5/16",3/8",1/2"+2 Psc Drill Bit 1/4" for Tile,Ceramic,Porcelain,Marble,Granite,Glass,Planter,Quartz,Stone.
$17.99

Trenion, T Core Drill Bits 1-1/4 Inch Advanced Technology on Diamond T Shape Segments for Hard Stone Concrete Marble Granite Brick for Dry Wet Drill Hole Saws 5/8"-11 Thread
$49.64

7-Piece Dry Diamond Drill Bits & Tile Drill Bits,Hex Shank. | 3/16", 1/4"(x2), 5/16...
$14.99

Diamond Drill Bits 1/2 Inch (13mm) 2PCS Vacuum Brazed Hole Saw | For Porcelain Tile...
$21.99

BOSCH LBH010 1/2 In. x 6 In. Round Hammer Drill Bit
$8.45

DECKRKAT 10-Piece Dry Diamond Drill Bits & TileDrill Bits - 3/16"(x2), 1/4"(x3), 5/16", 3/8", 1/2" + 1/4"(x2) Bit for Tile,Ceramic, Porcelain,Marble,Granite.
$16.14

10-Piece Dry Diamond Drill Bits & Tile Drill Bits,Hex Shank. | 3/16(x2)",1/4"(x3),5...
$17.99

Trenion, T Core Drill Bits 2 Inch Advanced Technology on Diamond T Shape Segments for Hard Stone Concrete Marble Granite Brick for Dry Wet Drill Hole Saws 5/8"-11 Thread
$79.98

Bosch LBHX010 1/2" x 6" Hex Shank Hammer Drill Masonry Bit, Carbide-Tipped for Impact Drivers & Hammer Drills, 4X Life, Fast Drilling in Concrete, Brick & Block
$8.01

BOSCH HCK001 7 pc. SDS-Plus® Bulldog™ Rotary Hammer Bit Set | Fast starts in concrete. SDS plus bits for rotary hammers, Carbide drill bits, centric tip, wear mark
$38.43

5" Diamond Hole Saw -Diamond Core Drill Bit 5" Tile Hole Saw 127mm
$48.44