Good Deal PicksDeals for the United States
BlogSearch
Product guide

BBDINO SI201 20A Platinum Silicone Mold Making Kit, 1 Gallon

Gallon: BBDINO SI201 is a clear, liquid platinum silicone rubber kit for making molds. The listing describes a 1:1 mix by volume or weight, a 30–40 minute working window, and a 3–5 hour cure at 73°F, making it relevant for projects where careful measuring and a short turnaround matter.

At a glance

  • The stated 1:1 ratio can be measured either by volume or by weight.
  • The manufacturer describes it as self-degassing, so a vacuum chamber is not required according to the listing.
  • A 30–40 minute working time precedes the stated 3–5 hour cure at 73°F.
  • Listed casting uses include resin, plaster, wax, soap, cement, and concrete.
Price
$73.07Save 15%

Reference price: $85.97

Price checked: Nov 19, 2026

View offer

Often bought together

Pros and cons

Pros

  • Flexible measuring options may suit makers who prefer volume measures over weighing.
  • The stated work window leaves time to mix and pour before curing begins.
  • Translucent material can make the mold contents easier to see while working.

Cons

  • The listed 30–40 minute working window places a time limit on preparation and pouring.

Technical specifications

17 specifications
Identity
BrandBBDINO
ModelSI201
Dimensions and installation
Form factorliquid
Dimensions listed8.66 x 6.69 x 9.84 inches
Weight listed10 pounds
Materials and protection
Material listed100% silicone rubber
Colortranslucent clear
Hardness20 ± 2 shore A
Material gradePlatinum Grade
Mixing and working
Mixing ratio1A:1B
Mixing basisby volume or by weight
Working time30-40 minutes
Cure time3-5 hours at room temperature of 73°F
Use and storage
Suitable casting materialsConcrete, Plaster, Epoxy resin, Wax, Low Temperature Metal, Cement
Maximum temperature after cure230C / 446F
Shelf life> 12 months
Storage conditionStore in cool and dry places without direct sunlight, with sealed, no more than 30C / 86F degrees

What to know before buying

Listing details to confirm

The listing gives cure timing as 3–5 hours at 73°F in one feature and about 5 hours at 73°F elsewhere, and says to wait 24 hours before using the mold. It also alternates between 20A and 20 ± 2 Shore A, while “1 gallon” appears in the title but no explicit package inventory confirms the quantity. Check the selected listing for these details and the specific package contents before ordering.

Who is it for?

A good fit for

  • Makers pouring molds for resin, plaster, wax, soap, cement, or concrete projects.
  • Users who want a 1:1 silicone kit measurable by volume or weight.
  • Projects where a translucent mold material and a stated 30–40 minute working window are useful.

Less suited to

  • Projects that need a longer working time than the listed 30–40 minutes.
  • Buyers who need a confirmed package volume or an exact, consistent cure-time specification before purchasing.
BBDINO SI201 20A Platinum Silicone Mold Making Kit, 1 Gallon · photo 2
Additional product photo 2

Customer reviews on Amazon

4.6 / 5 · 518 ratings
  • 5 stars80%80%
  • 4 stars10%10%
  • 3 stars4%4%
  • 2 stars2%2%
  • 1 star4%4%

Customer feedback reports positive impressions of quality, ease of mixing, material, and durability, including a mention of use with epoxy resin and concrete. Experiences with bubbles are mixed, and some customers say molded pieces remained sticky. This matters because the listing’s self-degassing claim does not ensure bubble-free results, while its cure guidance depends on accurate 1:1 measuring and mixing.

Positive themes

  • Customers describe the kit as high quality, easy to mix, and durable.

Negative themes

  • Some customers report sticky molded pieces.

Mixed feedback

  • Some customers report no bubbles, while others mention surface bubbles.
  • Feedback on curing time and value is mixed.

Frequently asked questions

What is the mixing ratio?

The listing specifies 1A:1B and says to measure by volume or by weight. It also advises mixing for at least 2 minutes.

How long does it take to cure?

The listing gives 3–5 hours at 73°F in one feature and about 5 hours elsewhere. It additionally says to wait 24 hours before using the mold, so treat the timing as listing guidance rather than a guaranteed result.

What can this silicone be used to mold?

The listing names epoxy resin, plaster, wax, soap, concrete, and cement among its casting uses.

Does it require a vacuum chamber?

The manufacturer describes the material as self-degassing and says a vacuum chamber is not needed. That is a product claim, not a guarantee that bubbles will never occur.

BBDINO SI201 20A Platinum Silicone Mold Making Kit, 1 Gallon · photo 3
Additional product photo 3

Alternative options

Products with discounts that might interest you

4.2
FabriCoat FABRICOAT-2500 Dark Brown Fabric Paint, 2500 ml
FabriCoat FABRICOAT-2500 Dark Brown Fabric Paint, 2500 ml

$69.95

$55.96

-20%
-20%
Product details in Markdown