
Auto Meter 5251 Pyrometer Probe Kit
The Auto Meter 5251 Pyrometer Probe Kit is described as a replacement stepper pyrometer probe kit. Its manufacturer description lists a stainless racing probe, 10-foot wire, and fittings, making it a potential replacement option when those parts match your installation.
At a glance
- Identified as a replacement probe for a stepper pyrometer.
- Manufacturer description specifies a 1/4-inch stainless racing probe with 10-foot wire.
- Description also lists a 1/4 compression-to-1/8 NPT connector and weld fitting.
Often bought together
Pros and cons
Pros
- The listed wire length and connector details provide useful installation-matching information before purchase.
- The described kit includes connection and weld-fitting components alongside the probe.
Technical specifications
5 specifications| Brand | AUTO METER |
|---|---|
| Model | 5251 |
| Dimensions listed | 4 x 4 x 4 inches |
|---|---|
| Weight listed | 0.15 kg |
| Material listed | Plastic |
|---|
What to know before buying
- The kit is described as a replacement probe, not as a complete pyrometer gauge. Confirm the probe, connector and fitting match your specific setup before ordering.
What’s in the box
Included- Auto Meter 5251 Pyrometer Probe Kit
Who is it for?
A good fit for
- Buyers replacing a probe in a compatible stepper pyrometer setup.
- Installers who need a probe kit described with a 10-foot wire and 1/8 NPT connection.
Less suited to
- Buyers seeking a complete pyrometer gauge kit, since the listing describes a replacement probe kit.
Customer reviews on Amazon
- 5 stars
67% 67% - 4 stars
27% 27% - 3 stars
6% 6% - 2 stars
0% 0% - 1 star
0% 0%
Aggregate ratings lean positive, with most ratings in the four- and five-star categories and a smaller three-star share. This offers a generally favorable but limited signal, not detail about installation fit or probe performance, so buyers should still match the listed connections to their setup.
Frequently asked questions
Does the Auto Meter 5251 include a complete pyrometer gauge?
The listing describes it as a replacement probe kit. It does not list a gauge as part of the kit.
What components does the listing describe?
The manufacturer description lists a 1/4-inch stainless racing probe with 10-foot wire, a 1/4 compression-to-1/8 NPT connector and a weld fitting.
What should I confirm before buying?
Check that the probe and fittings match your existing pyrometer installation, including the stated connector size and thread.
Alternative options

Auto Meter 5249 Pyrometer Probe Kit,2.625 in.
$62.86

AUTO METER 2654 Z-Series Electric Pyrometer Gauge Kit,2.3125 in.
$189.89

2 1/4 Inch Type K Thermocouple Sender Probe 0-1800 F
$74.74

ZHSYMX Exhaust Gas Temperature EGT Gauge Kit | 2‑1/16in 52mm Ultra Thin 0‑1800℉ Red LED with Sensor and Dashboard Pod
$47.99

GlowShift Replacement Exhaust Gas Temperature EGT Probe 1/8-27 NPT Thread & Ferrule Fittings - Current Model Probe with Waterproof Connector
$16.99

TCE-K05H3-150 K-Type Metal Thermocouple Sensor Probe with Fitting Screw for High Te...
$26.19

3/8" Fuel Line Seal Grommet 1812348C1 S19405 F81Z9C387BA(12pcs) | Seal Grommet E3TZ...
$14.68

4" X 6" Silicone Charge Air Cooler Hump Hose with Clamps,4Pcs Red | Heavy Duty Inte...
$59.99

Yoebor 304 Stainless Steel Pipe Adapter 1/8" G Female to 1/8" NPT Male 1pc | Convert g thread to MNPT for Water Oil Gas
$7.89

300 Amp Circuit Breaker Manual Reset 12-48 Volt DC 0-8 Gauge Self Recovery Overload...
$19.99

3.5" Inch Straight DIY Custom Mandrel Exhaust Pipe Tube Pipe,Industrial Pipes,Unive...
$34.99

TCE-K02H3-100 K Type Thermocouple Metal Probe for Furnace K-Type Input Instrument T...
$14.98
























