Good Deal PicksDeals for the United States
BlogSearch
Product guide

ARCCAPTAIN iControl CUT55 MP Non-HF Plasma Cutter

The ARCCAPTAIN iControl CUT55 MP is a non-HF plasma cutter with smartphone app controls, air-pressure monitoring, and functions for cutting expanded metal, rust removal, and gouging. The listing claims up to 55A at 240V and gives different cutting ranges for 120V and 240V, so match its capacity to your supply and material needs.

At a glance

  • Non-HF blowback start with a pilot arc intended for non-contact starts on rusty or painted metal.
  • App controls are listed for adjusting cutting current, monitoring air pressure, receiving error alerts, and viewing work status.
  • Digital air-pressure monitoring displays incoming pressure and alerts when it leaves the stated optimal range.
  • PA, PT, 2T, and 4T modes address different torch-start and trigger preferences.
  • Listing describes over-voltage, over-current, overload, overheating, and high- and low-air-pressure protections.
Price
$341.96Save 26%

Reference price: $459.99

Price checked: Nov 19, 2026

View offer

Often bought together

Pros and cons

Pros

  • Separate 120V and 240V cutting ranges help buyers compare the stated capacity with their power supply.
  • App adjustments and real-time air-pressure display provide operating information without relying only on the torch or panel.
  • Rust removal, expanded-metal cutting, and gouging extend the listed functions beyond standard plate cutting.
  • An explicit contents list names an air hose, earth clamp, IPT60 torch, and power adapter.

Technical specifications

13 specifications
Identity
BrandARCCAPTAIN
Power and battery
Power configurationdc
Cutting and operating features
Starting methodNon-high-frequency blowback start
Maximum listed current55A (240V)
Cutting range120V: 12–15mm | 240V: 18–26mm
Listed maximum cutting thickness1 inch (26mm)
Supported materialssteel, stainless steel, copper, and more
Functionsexpanded metal, rust removal, and plasma gouging
Recommended air pressure0.3–0.55 MPa or 0.4 MPa (57.5 PSI)
Operating modesPA (Pilot Arc), PT (Post Time), 2T (press-and-hold), and 4T (press-to-start/press-to-stop)
Dimensions and installation
Weight listed20.5 pounds
Package dimensions19.92 x 12.99 x 11.02 inches
Materials and protection
Material listedIron

What to know before buying

  • The listed ranges are manufacturer claims, not independently verified cut results. Plasma gouging requires a nozzle replacement, and the listing recommends air pressure of 0.3–0.55 MPa or 0.4 MPa (57.5 PSI).

What’s in the box

Included
  • 10FT air hose
  • 10FT earth clamp
  • 10FT IPT60 cutting torch
  • Power adapter
  • ARCCAPTAIN plasma cutter

Who is it for?

A good fit for

  • Fabrication and repair users who want app-based adjustments and air-pressure monitoring.
  • Buyers working with rusted or painted surfaces, expanded metal, or gouging tasks as well as ordinary cutting.
  • Users choosing between 120V and 240V setups who can work within the respective listed cutting ranges.

Less suited to

  • Buyers who need independently verified cutting capacity or guaranteed performance on a particular metal thickness.
  • Users who do not need app features, air-pressure monitoring, or the additional listed cutting functions.
ARCCAPTAIN iControl CUT55 MP Non-HF Plasma Cutter · photo 2
Additional product photo 2

Customer reviews on Amazon

4.5 / 5 · 97 ratings
  • 5 stars73%73%
  • 4 stars17%17%
  • 3 stars3%3%
  • 2 stars1%1%
  • 1 star6%6%

Customer feedback reports favorable impressions of cutting performance and rust removal, including comments about continuous cuts and cutting thicker steel. These reports are customer perceptions, not verified performance measurements. That feedback may be relevant to repair and fabrication buyers, but the listing’s separate 120V and 240V cutting ranges are the better guide for matching the machine to a planned task. Feedback also describes the product as worth the price, while aggregate ratings include a smaller one-star share that indicates experiences are not uniformly positive.

Positive themes

  • Customers report favorable cutting performance, including a report of continuous cuts on 1/4-inch material.
  • Rust removal is specifically praised in the supplied feedback.
  • Customers describe the product as worth the price.

Frequently asked questions

What cutting capacity does the listing claim?

It claims up to 55A at 240V, with a cutting range of 12–15mm on 120V and 18–26mm on 240V. Treat these as listing claims and choose based on your supply and material requirements.

Can it start cutting without touching the metal?

The listing describes a pilot arc that allows non-contact starting, including on rusty or painted surfaces.

What functions besides cutting plate are listed?

Expanded-metal cutting, rust removal, and plasma gouging are listed. The listing says to replace the nozzle when gouging.

What comes in the stated contents list?

The manufacturer list names a 10FT air hose, 10FT earth clamp, 10FT IPT60 cutting torch, 120/240V power adapter, and the plasma cutter.

ARCCAPTAIN iControl CUT55 MP Non-HF Plasma Cutter · photo 3
Additional product photo 3

Alternative options

Product details in Markdown