Good Deal PicksDeals for the United States
BlogSearch
Product guide

ANYCUBIC Photon Mono M7 Pro 14K Resin 3D Printer

The ANYCUBIC Photon Mono M7 Pro is a resin 3D printer listed with 14K optics, a large build volume, and resin-handling features aimed at faster, more continuous printing. The advertised maximum of 170mm/h applies when using high speed 2.0 resin, so it is not an unconditional speed figure.

At a glance

  • The 170mm/h maximum is stated for high speed 2.0 resin, with the listing comparing it to standard resin at a 0.1mm layer thickness.
  • A 14K optical system and the LighTurbo 3.0 light system are claimed for detailed resin printing.
  • The stated build volume is 223*126*230 mm³/8.79*4.96*9.06 inches.
  • The listing describes a temperature-control vat, automatic resin refill, and an odor-filtering Airpure unit.
Price
$449.99Save 21%

Reference price: $569.99

Price checked: Nov 19, 2026

View offerBlack Friday weekExplore the selection

Often bought together

Pros and cons

Pros

  • The stated build volume accommodates prints up to 230 mm in one dimension, useful for larger single pieces or batches of smaller models.
  • Automatic resin refill is described as supporting continuous refill during printing, reducing the need to pause to replenish resin.
  • Temperature control is intended to help manage resin printing in colder or low-temperature conditions.

Technical specifications

10 specifications
Identity
BrandANYCUBIC
Materials and protection
Material listedResin
Printing
Optical system14K
Maximum print speed claim170mm/h
Speed claim conditionwhen using high speed 2.0 resin
Build volume223*126*230 mm³/8.79*4.96*9.06 inches
Light systemLighTurbo 3.0
Resin handling
Temperature controlTemperature control resin vat
Automatic refillAutomatic resin refill
Odor filtration unitAnycubic Airpure

What to know before buying

Listing details to confirm

The listing's dimensions and weight are inconsistent: dimensions appear as both 25"D x 25"W x 28"H and 25 x 25 x 28 inches, while weight appears as both 5000 g and 11.02 pounds. Automatic resin refill is stated to need 10-40℃ and 20-80% humidity, and automatic temperature sensing may differ from other measuring devices. The 170mm/h speed claim is conditional on high speed 2.0 resin and a 0.1mm layer thickness.

Who is it for?

A good fit for

  • Resin-printing users who want a stated 14K optical system and a relatively large listed build volume.
  • Users who expect to benefit from automatic resin refill or temperature-managed resin handling, especially in cooler work areas.

Less suited to

  • Buyers who need a verified, consistent outer footprint or product weight before allocating workspace or planning transport.
  • Buyers who require the advertised maximum speed with any resin, rather than the stated high speed 2.0 resin condition.
ANYCUBIC Photon Mono M7 Pro 14K Resin 3D Printer · photo 2
Additional product photo 2

Customer reviews on Amazon

4.4 / 5 · 105 ratings
  • 5 stars79%79%
  • 4 stars7%7%
  • 3 stars4%4%
  • 2 stars3%3%
  • 1 star7%7%

Aggregate ratings lean positive, with most ratings in the five-star category, but a smaller share are low ratings. Without review comments, the ratings do not identify particular strengths or problems. Buyers should weigh this limited sentiment signal against their own priorities, especially the conditional speed claim and the listing's inconsistent size and weight details.

Frequently asked questions

Does the printer reach 170mm/h with any resin?

The listing states a maximum of 170mm/h when using high speed 2.0 resin, and frames the claim at a 0.1mm layer thickness. It does not establish that speed for other resins or settings.

What is the stated build volume?

The listed build volume is 223*126*230 mm³/8.79*4.96*9.06 inches.

What should I know about automatic resin refill?

The listing says refill can continue during printing. It specifies an operating environment of 10-40℃ and 20-80% humidity for optimal performance.

Are the printer's outer dimensions and weight clear?

No. The listing gives two inconsistent formats for dimensions and two different weight values, so confirm those details if they affect your setup.

ANYCUBIC Photon Mono M7 Pro 14K Resin 3D Printer · photo 3
Additional product photo 3

Alternative options

Products with discounts that might interest you

4.2
MUNBYN SP01 Voice-to-Print Thermal Sticker Printer
MUNBYN SP01 Voice-to-Print Thermal Sticker Printer

$99.99

$55.99

-44%
-44%
Product details in Markdown