1 / 7ANYCUBIC Kobra S1 Max FDM 3D Printer, 350×350×350 mm³, Enclosed CoreXY
ANYCUBIC Kobra S1 Max is an enclosed CoreXY FDM printer listed with a 350×350×350 mm³ build volume. Its large format, heated chamber and high-temperature hotend target oversized parts and engineering filaments, while the advertised 600 mm/s maximum is a ceiling rather than a stated everyday speed.
At a glance
- Large build area is suited to models that would otherwise need to be split into smaller pieces.
- A 65°C heated chamber and 350°C hotend are listed alongside support for several engineering filament types.
- The manufacturer describes a 720P camera with AI monitoring and 49-point auto-leveling.
- Multicolor printing requires separately added ACE 2 Pro units according to the listing.
Pros and cons
Pros
- 350×350×350 mm³ build volume offers room for large single-piece prints.
- The listing specifies a heated chamber, heated bed and high-temperature hotend for engineering-material workflows.
- Hardened steel nozzle is specified for use with abrasive filaments.
- Automatic leveling and camera monitoring are listed features.
Cons
- The printer is a substantial unit at a listed 67.9 pounds, so placement and moving it require planning.
- Multicolor printing is an upgrade path, not a stated built-in capability of this printer listing.
Technical specifications
17 specifications| Brand | ANYCUBIC |
|---|---|
| Printing technology | FDM |
| Build volume | 350×350×350mm³ |
|---|---|
| Weight listed | 67.9 pounds |
| Motion system | CoreXY |
|---|---|
| Maximum printing speed | 600mm/s |
| Default print speed | 300mm/s |
| Maximum acceleration | 20000mm/s² |
| Hotend temperature | 350°C |
|---|---|
| Heated bed temperature | 120°C |
| Heated chamber temperature | 65°C |
| Supported engineering filaments | ABS, ASA, PC, PA, PA6-CF, PC-CF/GF, and PET-CF |
| Nozzle | hardened steel nozzle |
| Camera | 720P camera |
|---|---|
| Auto-leveling measurement points | 49 measurement points |
| Compatible accessory | ACE 2 Pro |
|---|---|
| Color capacity claim | Add one ACE 2 Pro for 4-color printing, expandable up to 16 colors with 4 additional ACE 2 Pro units |
What to know before buying
Listing details to confirm
The listing gives two differently formatted external dimensions, 20.08"D x 22.83"W x 18.9"H and 20.08 x 22.83 x 18.9 inches, so the exact dimension notation is inconsistent. Its claimed 600mm/s maximum differs from the listed 300mm/s default, and the stated 4-to-16-color capability requires additional ACE 2 Pro units whose inclusion is unconfirmed here. Confirm the selected listing's dimensions and any bundled accessories before purchase.
Who is it for?
A good fit for
- Makers who need a large enclosed FDM build area for oversized models or functional prototypes.
- Users planning to print listed engineering filaments and who can work within the stated temperature limits.
- Buyers comfortable treating multicolor as an accessory-dependent upgrade.
Less suited to
- Buyers who need multicolor hardware included without confirming the package contents.
- Users with limited space or who need a lightweight printer that is easy to reposition.
- Those expecting 600mm/s to represent the stated default print speed.

Customer reviews on Amazon
- 5 stars
52% 52% - 4 stars
28% 28% - 3 stars
7% 7% - 2 stars
0% 0% - 1 star
13% 13%
Aggregate ratings lean positive overall, but include a notable low-star share. With a limited rating sample and no written feedback supplied, they do not establish why buyers were satisfied or dissatisfied, nor confirm real-world speed, material performance or camera effectiveness. Buyers should assess those needs against the listed build volume, temperatures and accessory-dependent multicolor setup.
Frequently asked questions
What is the Kobra S1 Max's listed build volume?
The listing states 350×350×350mm³, a large format for printing bigger parts with fewer section breaks.
Is 600mm/s the stated default print speed?
No. The listing calls 600mm/s the maximum and separately gives 300mm/s as the default. Actual results are not established by those claims.
Does this listing include multicolor printing hardware?
The product description says it can be upgraded with ACE 2 Pro units, but this listing does not confirm those units are included. Check the selected package.
Which materials are named as compatible?
The listing names ABS, ASA, PC, PA, PA6-CF, PC-CF/GF, and PET-CF, alongside a 350°C hotend and 65°C heated chamber.

Alternative options

Anycubic 3D Printer Kobra 3 MAX Only, Large Printing Volume | Support Multicolor Needs ACE Pro, 600mm/s High-Speed Precise Auto-Leveling & Anti-Skip Upgrade 420 * 420 * 500mm Print Volume
$429.99

Anycubic Kobra S1 Max Combo 3D Printer, Large Build Size 350x350x350 mm³ | Enclosed CoreXY System,Native 4 Color with ACE 2 Pro, 600mm/s High Speed for Engineer and Designer to Build Functional Parts
$799.99

Anycubic Kobra S1 Max Combo Multi-Color 3D Printer, 13.8" x 13.8" x 13.8" | Built in 4-color, Enclosed CoreXY System, Up to 600mm/s Fast Printing, Auto Leveling, Ultra-Quiet, Easy to Use, Anycubic App
$799.99

Anycubic Kobra 3 Max V2 Combo FDM 3D Printer, 420×420×500mm³ Build Size | Fast 600mm/s Printing, Full-Metal Hotend, Native 4 Color, Auto-Leveling & Anti-Skip, Smart & Uninterrupted Printing
$625.58

FLASHFORGE Creator 5 Pro 3D Printer, 4-Toolhead Multi-Color, Enclosed | 65°C Heated Chamber for Engineering Filaments, Near-Zero Purge Waste, 5X Faster Printing, CoreXY 600mm/s, HEPA 13 Filtration
$749.00

ANYCUBIC Photon Mono M7 MAX Resin 3D Printer, 13.6’’ 7K Large Resin Printer | with COB LighTurbo 3.0, Dynamic Heating, Flip-Open Cover Design, Print Size 11.8'' x 11.7'' x 6.5''
$649.99

ANYCUBIC Wash & Cure Max 3.0, 15.1L Ultra-Large Washing Volume | Detergent Saving 50%, Customizable Wash & Cure Process, Compatible with Photon Mono Series/Saturn Series Resin 3D Printer
$349.99

dreame L40s Ultra CE Robot Vacuum and Mop with Self-Emptying, TriCut Brush | 13,000Pa Suctiion, DuoSrub Mopping, Extendable Mop, Mop Self-Cleaning, Ultrasonic Carpet Sensing, 3DAdapt Obstacle Avoidance
$379.51

ELEGOO Centauri 2 3D Printer, Full Auto Calibration, Beginner-Friendly | CoreXY 500mm/s High-Speed Printer, Smooth Print Quality, 350°C High-Temp Nozzle, Easy to Use, 256x256x256mm Build Volume
$237.15

Anycubic Kobra S1 Max FDM 3D Printer Only, Fully-Enclosed CoreXY System | High-Speed Printing up to 600mm/s, 350×350×350mm³ Build Volume, Auto Leveling, Quiet Printing for Beginners and Professional
$599.99

Creality K2 (A) 3D Printer, Multicolor Printing High-Speed 600mm/s | Auto Leveling, Smart AI Camera, Rock-Solid Frame, Direct Drive Extruder, Quiet Printing, Build Volume 260 * 260 * 260mm
$349.00

Anycubic Kobra 3 Max V2, Large Format 3D Printer Only, Full-Metal Hotend | Large Build Size 420×420×500mm³, 600mm/s High Speed, 300°C High-Temp Hotend, Auto Leveling & Flow Control,Easy to Use
$449.99























