1 / 7Polymaker Fiberon PA6-CF20 3D Printing Filament, 1.75 mm, 0.5 kg
Printing: Polymaker Fiberon PA6-CF20 is a carbon-fiber-reinforced nylon filament for rigid functional prints, tooling, fixtures, and prototypes. It needs careful moisture control and a printer setup suited to abrasive, high-temperature material, so it is a better fit for experienced users than a basic PLA workflow.
At a glance
- PA6 nylon reinforced with 20% carbon fiber, intended for stiff functional components and engineering prototypes.
- The listing gives its highest heat-deflection claim only after annealing, at 100°C for 16 hours.
- Moisture-sensitive filament calls for pre-drying and continued dry storage or printing.
- Carbon fiber is abrasive, so the manufacturer calls for a hardened steel or ruby nozzle rather than standard brass.
Reference price: $39.99
Price checked: Nov 21, 2026
View offerBlack Friday weekExplore the selectionOften bought together

2 Pcs Knurled 1/2 x 28 to 3/4 x 16 Thread Adapters with Washers | Black, Metal, Rubber, Automotive Threaded Oil Filter Adapters, Cylindrical Design, Vehicle Repair Converters
$19.99

4 Pack 1/2”-28 to 3/4”-16 Thread Protector Reducer with Rubber Washers | Converts 1/2”-28 female to 3/4”-16 male threads;Cerakoted steel design with rubber washers Adapter for durable connections
$22.99
Pros and cons
Pros
- Carbon fiber reinforcement is intended to improve stiffness, strength, and dimensional stability for functional prints.
- A stated 1.75 mm diameter and 0.5 kg spool suit users who need this material in a smaller spool quantity.
- The listing provides detailed drying, nozzle, and annealing guidance for setup planning.
Cons
- The required drying, humidity control, high nozzle temperature, and wear-resistant nozzle add preparation and equipment demands compared with simpler filaments.
Technical specifications
18 specifications| Brand | Polymaker |
|---|---|
| Model | FG03001 |
| Weight listed | 0.5 kg |
|---|---|
| Diameter | 1.75 millimeters |
| Material listed | Nylon |
|---|---|
| Dry X-Y tensile strength | 109.3 MPa |
| Young’s modulus | 8.64 GPa |
| Heat deflection temperature | 215°C at 0.45 MPa after annealing at 100°C for 16 hours |
| Bending modulus (dry) | 7037 |
| Bending modulus (wet) | 2286 |
| Drying before printing | 100°C for 10 hours |
|---|---|
| Recommended storage and printing humidity | below 20% relative humidity |
| Nozzle temperature | 280–300°C |
| Build plate temperature | 40–50°C |
| Nozzle requirement | hardened steel or ruby nozzle |
| Fan setting | cooling fan off |
| Annealing for optimum heat resistance and dimensional stability | 100°C for 16 hours |
| Maximum stated printing speed with tuned profile | up to 300 mm/s |
What to know before buying
Listing details to confirm
Listing details are not contradictory, but reported customer experiences are mixed: some describe good durability and build-plate adhesion while others report brittleness or poor adhesion. Manufacturer performance figures are conditional, including the 215°C heat-deflection value after annealing, and finished-part results may vary with design and print conditions.
Who is it for?
A good fit for
- Experienced 3D-printing users making rigid fixtures, tooling, or functional prototypes who can control moisture and use a wear-resistant nozzle.
- Buyers who want a half-kilogram spool of carbon-fiber-reinforced PA6 rather than a larger listed quantity.
Less suited to
- Users seeking a low-preparation filament or printing with a standard brass nozzle.
- Buyers without a way to dry and store moisture-sensitive nylon, or whose printer cannot reach the stated nozzle-temperature range.

Customer reviews on Amazon
- 5 stars
89% 89% - 4 stars
4% 4% - 3 stars
2% 2% - 2 stars
1% 1% - 1 star
4% 4%
Customer feedback describes the filament as consistently printable with an attractive surface finish, and some users say it is ready to print from the bag. Experiences are not uniform: durability and build-plate adhesion are mixed, with reports ranging from good heat and abuse resistance to brittleness or difficulty sticking. Value opinions also differ. These reports matter particularly for this moisture-sensitive nylon, since the listing requires drying and controlled humidity, and they do not replace the stated printer and annealing conditions.
Positive themes
- Customers report good printability and surface finish, with some saying the material works consistently.
Mixed feedback
- Customer reports on durability range from good resistance to brittleness.
- Build-plate adhesion experiences differ, from successful sticking to difficulty adhering.
- Customers disagree on whether the filament offers good value.
Frequently asked questions
What printer setup does the listing recommend?
It specifies a 280–300°C nozzle, a 40–50°C build plate, an all-metal hotend, and the cooling fan off. A heated chamber is not required according to the listing.
Does this filament need drying?
Yes. The manufacturer recommends drying it at 100°C for 10 hours before printing, then storing and printing below 20% relative humidity, ideally from a dry box.
Is a standard brass nozzle suitable?
The listing says carbon fiber is abrasive and calls for a hardened steel or ruby nozzle instead of standard brass.
Is the stated 215°C heat-deflection temperature unconditional?
No. The stated value is at 0.45 MPa after annealing at 100°C for 16 hours, and the manufacturer says final performance can vary with design and print conditions.

Alternative options

Polymaker Fiberon PPS-CF10 Filament Black 1.75mm 0.5KG | Extreme Heat Resistance, Carbon Fiber Reinforced PPS, Engineered Dimensional Stability Rigid 3D Printer Filament for Molding
$55.49

SUNLU PA6-CF20 Carbon Fiber Nylon 3D Printing Filament 1.75mm, 1KG, Black | 20% Carbon Fiber Reinforced, Heat Resistant up to 209°C, Stiff & Strong & Heat Resistant PA6 CF Filament
$34.18

Creality Carbon Fiber PETG 1KG,Tea Brown,1-Pack | Hyper PETG-CF Filament, Matte Finish, Heat-Resistant, High Strength, High Speed 30-600mm/s, Fits for Most 3D Printers
$25.49

Siraya Tech Fibreheart PPA 3D Printer Filament, High-Strength, Black, 1kg | High Performance Polyphthalamide Nylon, Extreme Strength & Heat Resistance, 1.75mm for Industrial Engineering Applications
$44.19

Carbon Fiber Nylon Filament 3D Printer Filament PA6-CF Filament 1.75mm 1kg with PC ...
$42.99

PC-CF Filament Polycarbonate Carbon Fiber 3D Printing Filament 1kg | 1.75mm, Engine...
$43.99

Polymaker ABS Filament Neon Green 1KG 1.75mm, Heat Resistant, Strength | High Toughness, Impact-Resistance, Low Odor, 3D Printer Filament for Most FDM Printers, Dimensional Accuracy +/- 0.03mm
$23.74

Polymaker PLA Pro Filament 1.75mm 10KG Bundle, High-Impact Resistance, Black
$95.99

Kingroon 2KG PETG 3D Printer Filament, High Strength, Low Warping, Odorless, Dimensional Accuracy +/- 0.03mm, 2 Rolls Spool(4.4lbs), 1.75mm, Black+Black
$19.65

Polymaker ASA Filament Bundle 4KG Black*2_White*2, UV & Weather Resistant | Outdoor Functional Parts, Durable, High Heat Resistant, 1.75mm Impact-Resistant, Reliable Layer Adhesion, 3D Printer Filament
$51.99

ANYCUBIC 3D Printer Filament PLA Bundle 2KG, Texture Grey | Dimensional Accuracy +/- 0.02mm, 3D Printing PLA Filament, Reusable Spool, Fits for Most FDM 3D Printers
$19.99

Polymaker Fiberon PA6-CF20 Carbon Fiber Nylon Filament 1.75mm, Black, 3kg | 20% Carbon Fiber Reinforced PA6 Filament, High-Strength Heat-Resistant PA6-CF Engineering 3D Printer Material
$126.99























