1 / 6MDBTTOOLS TCT Annular Cutter, 11/16 in, 2 in Depth
The MDBTTOOLS TCT Annular Cutter is listed with an 11/16-inch cutting diameter and a 2-inch cutting depth. Its Weldon shank and tungsten-carbide construction are intended for magnetic-drill and metalworking use, with the listing also claiming compatibility with 3/4-inch Weldon holders.
At a glance
- The title specifies an 11/16-inch nominal diameter and 2-inch depth. The listed diameter is also given as 0.69 inches.
- The listing describes a Weldon shank and compatibility with 3/4-inch Weldon holders and other standard tool holders.
- Tungsten-carbide tips and a three-edge cutting design are claimed for this cutter.
- The manufacturer says to use appropriate cutting fluid, not water, and correct settings. Its claim of performance over 1,000 holes is conditional, not a guaranteed service life.
Reference price: $40.00
Price checked: Nov 18, 2026
View offerAhead of Black FridayExplore the selectionOften bought together
Pros and cons
Pros
- A stated 2-inch cutting depth suits holes within that depth range, subject to the workpiece and setup.
- The Weldon shank is listed as compatible with 3/4-inch Weldon holders, and the listing says it suits most magnetic drills.
- Tungsten-carbide construction is specified, with stainless steel and cast iron mentioned in the manufacturer’s material claims.
Technical specifications
7 specifications| Brand | MDBTTOOLS |
|---|---|
| Part number | 2IN-AC-11/16 |
| Listed cutting diameter | 0.69 inches |
|---|---|
| Material listed | Tungsten Carbide |
| Flute type | Spiral |
| Surface recommendation | Alloy Steel |
| Shank type | Weldon |
|---|
What to know before buying
Listing details to confirm
The title gives the cutter diameter as 11/16 inch, while the technical detail lists 0.69 inches. These are near-equivalent rounded descriptions, not identical stated values. Confirm the required hole size and holder fit before buying. The claimed compatibility and performance statements are manufacturer claims, not independently verified.
What’s in the box
Included- Annular cutter, part 2IN-AC-11/16
Who is it for?
A good fit for
- Metalworkers needing an annular cutter listed for a 2-inch-deep hole.
- Buyers with a magnetic drill or tool holder compatible with the listed Weldon shank.
- Work involving alloy steel, or considering the manufacturer’s stated carbide-tip use for stainless steel and cast iron.
Less suited to
- Anyone who needs a diameter other than the listed 11/16 inch or 0.69 inches.
- Buyers seeking a supplied pilot pin or other accessory, since none is identified in the package contents provided.

Customer reviews on Amazon
- 5 stars
64% 64% - 4 stars
10% 10% - 3 stars
8% 8% - 2 stars
0% 0% - 1 star
18% 18%
Aggregate ratings show a mixed distribution, with a majority in the highest star category but a notable share in the lowest. The sample is small, and no written customer feedback is supplied, so it does not establish specific strengths or defects. Buyers should weigh this limited signal against the stated diameter, depth and holder fit.
Frequently asked questions
What size hole is this cutter listed to make?
The title lists an 11/16-inch diameter, while the technical details state 0.69 inches. Confirm the diameter required for your work before purchase.
What is the listed cutting depth?
The title states a 2-inch depth.
Which holder does it fit?
The listing specifies a Weldon shank and claims compatibility with 3/4-inch Weldon holders and other standard holders. Check your drill’s holder specification.
Does the listing include a pilot pin?
The provided included-components entry names only the cutter part number. A pilot pin is not listed among the supplied contents.
What cutting fluid should be used?
The manufacturer calls for appropriate cutting fluid and specifically says not water, along with correct settings.

Alternative options

SALI 2 pcs Annular Cutter Diameter 5/8 Inch with Weldon Shank 3/4"(with 2 Flats) Cutting Depth 1" Mag Drill Bit for Magnetic Drill Press HSS Fully Ground Drill with One 1/4"*3" Pilot Pin
$29.99

Kolvoii TCT Annular Cutter 1‑3/8"Diameter x 2" Depth, Mag Drill Bit | 3/4" Weldon Shank, Pilot Pin & Hex Key Included. Cuts Stainless Steel, Iron, Alloy Steel. Fits Magnetic Drill Press
$43.99

VEVOR Annular Cutter Set, 13 pcs Weldon Shank Mag Drill Bits, 1" Cutting Depth, 7/16" to 1-1/16" Cutting Diameter, M2AL HSS, 2 Pilot Pins, Hex Wrench and Portable Case, for Using with Magnetic Drills
$108.82

GRIXLEN 1-7/8" x 2" Annular Cutter with Weldon Shank | Carbide Tip Annular Drill Bit for Stainless Steel, Iron (2" Depth, 1-7/8"(47mm) Diameter)
$55.99

TCT Annular Cutter,1-3/8"Diameter and 1-3/8depth, Universal Shank Compatible with 3/4" Weldon Shark and Other Standard Tool Holder, Carbide-Tipped Annular Cutter Mag Drill Bit with Pilot Pin
$48.00

YESWELDER Welding Gas Flowmeter with Gas Hose, Leak-Proof Argon CO2 | Sealed Connections, Clear Gauge Readout, Shielding Supply Setup, MIG/TIG Station Preparation, Convenient Source Connection
$27.99

VEVOR Hydraulic Hose 3/8 Inch x 100 Ft 4800 PSI Working Pressure | Bulk Flexible Coiled Rubber Oil Hose, with Dual High-Tensile Steel Wire Braids, Weather-Resistant from -20°C to 140°C
$81.81

1/4x3/4 Hammer Drive Nail in Anchor (50 per Box) Cement hammering Anchors
$9.99

Accusize Industrial Tools Weldon Shank Nitto One Touch Shank, 0519-8000 | 3/4" Weldon Shank to 3/4" Nitto One Touch Shank Adapter
$32.68

YESWELDER TIG Welding Torch WP-20F Flexible Head Water-Cooled 250Amp | Welding Torch 25ft Cable
$66.55

50PCS CCMT21.51 CCMT060204 Carbide Turning Inserts,CCMT Insert Insert Mutilayer Coa...
$27.19

1/8''-5/8'' Magnetic Drill Chuck Adapter, Weldon Shank B16 Thread | Drill Bit Adapt...
$33.99

























