# MDBTTOOLS TCT Annular Cutter, 11/16 in, 2 in Depth

The MDBTTOOLS TCT Annular Cutter is listed with an 11/16-inch cutting diameter and a 2-inch cutting depth. Its Weldon shank and tungsten-carbide construction are intended for magnetic-drill and metalworking use, with the listing also claiming compatibility with 3/4-inch Weldon holders.

- [Original product page](https://gooddealpicks.com/product/mdbttools-tct-annular-cutter-11-16-inch-2-inch-depth)
- [View offer](https://gooddealpicks.com/visit/mdbttools-tct-annular-cutter-11-16-inch-2-inch-depth)
- Market: US
- Language: en-US
- Currency: USD
- Brand: MDBTTOOLS
- Category: [Tools & Garden &gt; Power Tools &gt; Drills & Drivers](https://gooddealpicks.com/tools-and-garden/power-tools/drills-and-drivers)
- Price: 20.00 USD
- Previous price: 40.00 USD
- Discount: 50%
- Price checked: 2026-11-18T05:35:12.522Z
- Rating: 4 / 5
- Reviews: 14

Prices and deal status are the latest recorded data, not a guarantee of availability. Confirm the price and availability with the store.

## At a glance

- The title specifies an 11/16-inch nominal diameter and 2-inch depth. The listed diameter is also given as 0.69 inches.
- The listing describes a Weldon shank and compatibility with 3/4-inch Weldon holders and other standard tool holders.
- Tungsten-carbide tips and a three-edge cutting design are claimed for this cutter.
- The manufacturer says to use appropriate cutting fluid, not water, and correct settings. Its claim of performance over 1,000 holes is conditional, not a guaranteed service life.

## Pros

- A stated 2-inch cutting depth suits holes within that depth range, subject to the workpiece and setup.
- The Weldon shank is listed as compatible with 3/4-inch Weldon holders, and the listing says it suits most magnetic drills.
- Tungsten-carbide construction is specified, with stainless steel and cast iron mentioned in the manufacturer’s material claims.

## Specifications

### Identity
- Brand: MDBTTOOLS
- Part number: 2IN-AC-11/16
### Cutting and construction
- Listed cutting diameter: 0.69 inches
- Material listed: Tungsten Carbide
- Flute type: Spiral
- Surface recommendation: Alloy Steel
### Shank and depth
- Shank type: Weldon

## Before you buy

- The title gives the cutter diameter as 11/16 inch, while the technical detail lists 0.69 inches. These are near-equivalent rounded descriptions, not identical stated values. Confirm the required hole size and holder fit before buying. The claimed compatibility and performance statements are manufacturer claims, not independently verified.

## In the box

- Annular cutter, part 2IN-AC-11/16 (Included): The listed contents identify the cutter by part number. No other components are specified.

## A good fit for

- Metalworkers needing an annular cutter listed for a 2-inch-deep hole.
- Buyers with a magnetic drill or tool holder compatible with the listed Weldon shank.
- Work involving alloy steel, or considering the manufacturer’s stated carbide-tip use for stainless steel and cast iron.

## Less suited to

- Anyone who needs a diameter other than the listed 11/16 inch or 0.69 inches.
- Buyers seeking a supplied pilot pin or other accessory, since none is identified in the package contents provided.

## Customer feedback

Aggregate ratings show a mixed distribution, with a majority in the highest star category but a notable share in the lowest. The sample is small, and no written customer feedback is supplied, so it does not establish specific strengths or defects. Buyers should weigh this limited signal against the stated diameter, depth and holder fit.

### Rating distribution

- 5 stars: 64%
- 4 stars: 10%
- 3 stars: 8%
- 2 stars: 0%
- 1 star: 18%

## Frequently asked questions

### What size hole is this cutter listed to make?
The title lists an 11/16-inch diameter, while the technical details state 0.69 inches. Confirm the diameter required for your work before purchase.
### What is the listed cutting depth?
The title states a 2-inch depth.
### Which holder does it fit?
The listing specifies a Weldon shank and claims compatibility with 3/4-inch Weldon holders and other standard holders. Check your drill’s holder specification.
### Does the listing include a pilot pin?
The provided included-components entry names only the cutter part number. A pilot pin is not listed among the supplied contents.
### What cutting fluid should be used?
The manufacturer calls for appropriate cutting fluid and specifically says not water, along with correct settings.

## Alternative options

- [SALI 2 pcs Annular Cutter Diameter 5/8 Inch with Weldon Shank 3/4"\(with 2 Flats\) Cutting Depth 1" Mag Drill Bit for Magnetic Drill Press HSS Fully Ground Drill with One 1/4"\*3" Pilot Pin](https://gooddealpicks.com/visit/mdbttools-tct-annular-cutter-11-16-inch-2-inch-depth)
- [Kolvoii TCT Annular Cutter 1‑3/8"Diameter x 2" Depth, Mag Drill Bit \| 3/4" Weldon Shank, Pilot Pin & Hex Key Included. Cuts Stainless Steel, Iron, Alloy Steel. Fits Magnetic Drill Press](https://gooddealpicks.com/visit/mdbttools-tct-annular-cutter-11-16-inch-2-inch-depth)
- [VEVOR Annular Cutter Set, 13 pcs Weldon Shank Mag Drill Bits, 1" Cutting Depth, 7/16" to 1-1/16" Cutting Diameter, M2AL HSS, 2 Pilot Pins, Hex Wrench and Portable Case, for Using with Magnetic Drills](https://gooddealpicks.com/visit/mdbttools-tct-annular-cutter-11-16-inch-2-inch-depth)
- [GRIXLEN 1-7/8" x 2" Annular Cutter with Weldon Shank \| Carbide Tip Annular Drill Bit for Stainless Steel, Iron \(2" Depth, 1-7/8"\(47mm\) Diameter\)](https://gooddealpicks.com/visit/mdbttools-tct-annular-cutter-11-16-inch-2-inch-depth)
- [TCT Annular Cutter,1-3/8"Diameter and 1-3/8depth, Universal Shank Compatible with 3/4" Weldon Shark and Other Standard Tool Holder, Carbide-Tipped Annular Cutter Mag Drill Bit with Pilot Pin](https://gooddealpicks.com/visit/mdbttools-tct-annular-cutter-11-16-inch-2-inch-depth)
- [YESWELDER Welding Gas Flowmeter with Gas Hose, Leak-Proof Argon CO2 \| Sealed Connections, Clear Gauge Readout, Shielding Supply Setup, MIG/TIG Station Preparation, Convenient Source Connection](https://gooddealpicks.com/visit/mdbttools-tct-annular-cutter-11-16-inch-2-inch-depth)
- [VEVOR Hydraulic Hose 3/8 Inch x 100 Ft 4800 PSI Working Pressure \| Bulk Flexible Coiled Rubber Oil Hose, with Dual High-Tensile Steel Wire Braids, Weather-Resistant from -20°C to 140°C](https://gooddealpicks.com/visit/mdbttools-tct-annular-cutter-11-16-inch-2-inch-depth)
- [1/4x3/4 Hammer Drive Nail in Anchor \(50 per Box\) Cement hammering Anchors](https://gooddealpicks.com/visit/mdbttools-tct-annular-cutter-11-16-inch-2-inch-depth)
- [Accusize Industrial Tools Weldon Shank Nitto One Touch Shank, 0519-8000 \| 3/4" Weldon Shank to 3/4" Nitto One Touch Shank Adapter](https://gooddealpicks.com/visit/mdbttools-tct-annular-cutter-11-16-inch-2-inch-depth)
- [YESWELDER TIG Welding Torch WP-20F Flexible Head Water-Cooled 250Amp \| Welding Torch 25ft Cable](https://gooddealpicks.com/visit/mdbttools-tct-annular-cutter-11-16-inch-2-inch-depth)
- [50PCS CCMT21.51 CCMT060204 Carbide Turning Inserts,CCMT Insert Insert Mutilayer Coa...](https://gooddealpicks.com/visit/mdbttools-tct-annular-cutter-11-16-inch-2-inch-depth)
- [1/8''-5/8'' Magnetic Drill Chuck Adapter, Weldon Shank B16 Thread \| Drill Bit Adapt...](https://gooddealpicks.com/visit/mdbttools-tct-annular-cutter-11-16-inch-2-inch-depth)

## Add-ons

- [ACTOOL 5/8'' Diameter x 2'' Depth of Cut Carbide Tipped TCT ANNULAR Cutter with 3/4'' Weldon Shank](https://gooddealpicks.com/visit/mdbttools-tct-annular-cutter-11-16-inch-2-inch-depth)
- [KEENTECH Carbide-Tipped Annular Cutter 3/4" Diameter x 2" Depth \| 3/4" Weldon Shank \(2 Flat\), TCT Mag Drill Bit with Pilot Pin for Stainless Steel Cast Iron, High Speed Cutting](https://gooddealpicks.com/visit/mdbttools-tct-annular-cutter-11-16-inch-2-inch-depth)

## Images

![MDBTTOOLS TCT Annular Cutter, 11/16 in, 2 in Depth — 1](https://gooddealpicks.com/i/8ZYhI7Qs_bvljao3fmI1RnI0yhNDh4s3TUtI_vmvs0O77Es2xCmEvjwKdKWG4uQGsHB448y3DObZm0YMLLKVul1r4reVgtNrWI7SikDJCFQziLwLgol3.jpg)

![MDBTTOOLS TCT Annular Cutter, 11/16 in, 2 in Depth — 2](https://gooddealpicks.com/i/uHFZlmQEhRZ9Lxf6sEp0IRRms9DrM_HdHQSo1qAE8mocGOpxut-427f47B5hr1F_jU66Z1JEyaOF2S4e2OUTdz_XDSqjJ3nuPI-NRJtfWJX3fdomjp8t.jpg)

![MDBTTOOLS TCT Annular Cutter, 11/16 in, 2 in Depth — 3](https://gooddealpicks.com/i/2xqGjodXG1UMa0s5XdqZKH1yIeSYu_ziuN-6hiXUxyOEVb47Ah_Hw1tzBAxNlGxhicQ1Rf0H2sn_dEcXDLVnQdKeTrTNm8v6Fk5xoDpXsmL0K94B0vkm.jpg)

![MDBTTOOLS TCT Annular Cutter, 11/16 in, 2 in Depth — 4](https://gooddealpicks.com/i/cmDlMUo9EOdgwubWZsrgNJyPGwbWHENfevu8sKY67IcTUhdbjauaYxhgHT_t44zdpvl79pKMKpsa1TGJ9vr_LaU8YCQled013rhA6SIUYTFpTqEGl14U.jpg)

![MDBTTOOLS TCT Annular Cutter, 11/16 in, 2 in Depth — 5](https://gooddealpicks.com/i/6qNsmWxtRuLDaYxyhJDrwTywIhoAyI0I4tGFIKoRJdeVINK4knC2aKeSMQS2j4RDShZGfNOk2Fm7BFopFiw0OE6D7eaPh2mEFsTcY6vwTeyE-WtaieCg.jpg)

![MDBTTOOLS TCT Annular Cutter, 11/16 in, 2 in Depth — 6](https://gooddealpicks.com/i/n1reJ0oP34RzqzpTR1sjLXffVYKZqiZKj7oHBZss-5FsLjBFWim5W-ocIkyackI11yOJBQ549J5ftyz22500HSsYWJUXesVsP-bkjDbGwSWm1XNXEPsA.jpg)
