1 / 7Dynofit 8N003P-24 Extended Spline Lug Nuts, M12 x 1.5, 24-Pack
Pack: Dynofit 8N003P-24 extended spline lug nuts are a 24-piece set listed for aftermarket wheels with M12 x 1.5 threads and a 60-degree conical seat. The listing says they are not for factory OEM wheels, so confirm thread, seat, wheel fit and required shank length before ordering.
At a glance
- Extended, closed-end design listed for aftermarket wheels, with a 60-degree conical seat.
- The listing names Toyota 4Runner and Tacoma among compatible vehicles, but fit depends on the wheel's thread and seat requirements.
- A socket key is identified in the installation description, which recommends hand-wrench use rather than an impact tool.
Often bought together

GAsupply 12x1.5 Black Lug Nuts, 1.38" 35mm Tall Conical Seat, 20pcs+1 Key | M12x1.5 6 Spline Closed End Chrome Acorn Tuner 60 Degree Wheel Lug Nuts with 1pcs Socket Key for Aftermarket Wheels
$17.99

DYNOFIT 14mmx1.5 Wheel Lug Nuts, 32x Black M14x1.5 Lug Nut,Conical/Cone Bulge Seat, Closed End Long Extended XL Spline with 1 Socket Key Fits 8 Lug Aftermarket Wheels
$25.64
Pros and cons
Pros
- The 24-piece set is suitable for a six-lug setup when all wheel and vehicle fit requirements match.
- Extended length is presented for aftermarket wheels and for certain spacer setups where the original nuts are too short.
- Spline drive and a specified 60-degree conical seat give buyers useful fitment details to compare against their wheel.
Cons
- The listing explicitly says these are not compatible with factory OEM wheels.
Technical specifications
20 specifications| Brand | dynofit |
|---|---|
| Model | 8N003P-24 |
| Thread size | M12 x 1.5 |
|---|---|
| Thread style | Right Hand |
| Thread coverage | Fully Threaded |
| Seat | 60 Degree conical |
| Drive style | Spline |
| Compatible groove diameter | 21 millimeters |
| Outside diameter | 20 millimeters |
| Item diameter | 12 millimeters |
| Overall length | Overall length: 1.69”(43mm) |
| Shank length | 7.6mm |
| Material listed | Alloy Steel |
|---|---|
| Exterior finish | Passivated |
| Finish type | Black Plated |
| Color | Black |
| Grade rating | Class 10.9 |
| Thread class | High Strength |
| Dimensions listed | 7.48 x 5.71 x 1.97 inches |
|---|---|
| Number of pieces | 24 |
What to know before buying
- The listing specifies aftermarket wheels only and advises against impact tools. It describes spacer use for 10–15 mm spacers, but confirm the actual wheel, spacer, stud engagement and vehicle requirements before installation. The title's 7.6 mm shank detail is not reconciled with the listed overall length of 1.69 inches (43 mm).
Who is it for?
A good fit for
- Owners whose aftermarket wheels require M12 x 1.5 threads, a 60-degree conical seat and an extended spline-drive lug nut.
- Buyers looking for a 24-piece set for a six-lug wheel configuration, after confirming vehicle-specific fitment.
Less suited to
- Owners retaining factory OEM wheels, which the listing says these nuts do not fit.
- Buyers whose wheel requires a different thread pitch, seat shape or lug-nut length.

Customer reviews on Amazon
- 5 stars
76% 76% - 4 stars
11% 11% - 3 stars
7% 7% - 2 stars
2% 2% - 1 star
4% 4%
Customer feedback reports favorable impressions of fit, functionality, quality and appearance, while also raising concerns about nuts loosening and rusting. Those reports matter for wheel hardware, but they do not establish whether a particular vehicle and wheel combination fits. The listing's stated aftermarket-only use, M12 x 1.5 thread and 60-degree conical seat remain essential fit checks.
Positive themes
- Customers report good fit and functionality, and some say the appearance is pleasing.
Negative themes
- Customer feedback includes reports of lug nuts loosening and rusting.
Mixed feedback
- Positive quality and fit impressions coexist with durability and rust-resistance concerns.
Frequently asked questions
Are these lug nuts intended for factory wheels?
No. The listing says this extended style is intended for aftermarket wheels and does not fit factory OEM wheels.
What fitment should I verify before ordering?
Confirm M12 x 1.5 threads, a 60-degree conical seat, the required nut length and fit for your wheel and vehicle. The listing names several vehicle models, but that alone does not confirm fit.
Can these be used with wheel spacers?
The listing describes using them with 10–15 mm spacers when the original lug nuts are too short. Confirm suitable thread engagement and fit for your specific setup.
What installation method does the listing recommend?
It recommends hand-wrench installation and says not to use an impact tool.

Alternative options

Dynofit 14x1.5 Lug Nuts for Chevy Silverado Ram 1500, M14x1.5 7/8" Hex One Piece Design OEM Style Factory Wheel Nuts for Tahoe GMC Sierra 1500 Buick Cadillac,24pcs Chrome Cone Seat Studs
$31.34

32pc 14x1.5 OEM Lug Nuts for 2008-2026 Chevy Silverado GMC Sierra 2500 3500 | M14-1...
$37.90

Dynofit 14x1.5 Spike Lug Nuts for Chevy Silverado 1500 GMC Sierra 2500HD 3500HD, 32pcs One-Piece Design Spiked Lug Nuts Fit F250 F350 Ram 2500, Black Hex Drive Bullet Nut for 6&8 Aftermarket Wheel
$50.34

14x1.5 Ford OEM Lug Nut, Mag Seat One-Piece Stock Wheel Lug Nut with Washer | Fit 2...
$53.54

Wheel Lug Nuts, 12x1.5, Black, 20PCS | 12mmx1.5, Closed End Bulge Acorn, Cone Seat,...
$15.29

KSP 1.25 inch Wheel Spacers for Tacoma 4Runner 1996-2023, 6x5.5 Wide Spacer | 6x139.7mm Forged Aluminum Spacers, M12x1.5 Studs, 106mm Hub Bore, Wider Track,Eliminate Tire Rub, fit FJ Cruiser GX460 GX470
$106.24

M12x1.5 Lug Nuts 24 Pack, Black 6-Spline Closed End Bulge Acorn Extended Lug Nuts w...
$40.49

Richeer 24Pcs M12x1.5 Long Extended OEM Factory Style Lug Nuts for Tacoma | 24PCS Black One Piece Mag Seat Tire Nuts, Replacement for Toyota Camry RAV4 Highlander Corolla Tacoma 4Runner Prius Sienna
$26.99

Richeer M14x1.5 OEM Factory Wheel Lug Nuts for Toyota Tacoma Tundra 4Runner | 24pcs One-Piece Lug Nuts 21mm Hex Fit for Toyota 4Runner Sequoia,OEM Lugnuts with Wider Washer Replace OE 90942-A1007|01121
$42.99

24PCS M12x1.5 Long Extended Lug Nuts Mag Seat for Toyota Tacoma 4Runner, 1.85" Tall...
$27.99

Dynofit 12x1.5 Open End Lug Nuts for Ford Honda,20pcs for Aftermarket Wheel | M12x1.5 Bulge Acorn Nuts,for Fusion Focus Escape,CR-V Accord Civic,Element Acura,Cold Forged Alloy Steel
$16.49

dynofit m12x1.5 Wheel Lug Nuts Black, (20pcs+2socket Key) 12mmx1.5 Spline Lugnuts Aftermarket Tuner (Bundle)
$24.00























