1 / 7Bestarc CUT55P V2 55A Plasma Cutter with HF Pilot Arc
Bestarc CUT55P V2 is a dual-voltage plasma cutter with an HF pilot arc and manual air-pressure adjustment. Its stated cutting capacity depends on voltage and operating conditions, and it requires a separate compressed-air source.
At a glance
- HF non-touch pilot arc is described for starting on rusted, painted or dirty metal surfaces.
- A manual regulator lets users set air pressure, while the LED display shows air pressure, voltage and current and can display error codes.
- 2T and 4T cutting controls and adjustable torch post-time are provided.
- Manufacturer claims different recommended thicknesses at 110V and 220V, with stated current and air-pressure conditions.
Pros and cons
Pros
- Non-touch HF pilot arc is intended to start without the torch head touching the workpiece, including on rusted, painted or dirty surfaces.
- LED status display and error-code indication can help users monitor machine settings and troubleshoot operating issues.
- Manual air regulator and adjustable post-time provide some control over air and torch cooling.
Cons
- A separate air compressor is required, adding equipment beyond the cutter itself.
- Air pressure must be set manually rather than adjusted automatically.
Technical specifications
17 specifications| Brand | bestarc |
|---|---|
| Model | CUT55P V2 |
| Part number | CUT55P |
| Rated cutting current in title | 55A |
| Power configuration | ac |
|---|---|
| Voltage claim in title | 110/220V Dual Voltage |
| Maximum recommended cutting thickness | 1/2” (12mm)@35A 110V 50PSI; 3/4” (18mm)@55A 220V 65PSI |
| Required circuit breaker | Power breaker up to 40A@110V 35A; Up to 30A@220V 55A. |
| Air pressure and flow recommendation | recommended air pressure should be within 60 PSI, with a flow rate of 250 liters per minute. |
| Dimensions listed | 12.01 x 5.12 x 8.5 inches |
|---|---|
| Weight listed | 16.76 pounds |
| Air connection | 1/4 NPT connector |
| Material listed | ABS, iron, Electronic |
|---|
| Pilot arc | high-frequency non-touch arc starting mode |
|---|---|
| Cutting control | 2T/4T |
| Post time adjustment | 3-15s |
| Pilot arc timing adjustment | up to 15s |
What to know before buying
Listing details to confirm
Listing details are inconsistent: the title specifies 55A and 110/220V, the feature text gives thickness claims of 1/2” (12mm) at 110V and 3/4” (18mm) at 220V with differing current and pressure conditions, and the included-components text separately claims 18mm maximum at 220V and 65PSI. The listed air recommendation is within 60 PSI while the thickness claim cites 65PSI, and the breaker wording is unclear. Confirm the applicable setup and requirements for the selected listing before use.
What’s in the box
- Plasma cutting torchIncluded
- Built-in regulatorIncluded
- HF pilot arcIncluded
- 18mm maximum cutting thickness claim at 220V and 65PSICheck selected pack
Check which accessories are included in your selected pack before buying.
Who is it for?
A good fit for
- DIY or workshop users who need a plasma cutter with dual-voltage claims and already have a suitable compressed-air source.
- Users who want non-touch pilot-arc starting for work on surfaces described as rusted, painted or dirty.
- Buyers who value on-machine readings for pressure, voltage and current and adjustable 2T/4T control.
Less suited to
- Buyers seeking a cutter with an included air compressor.
- Users who need automatic air-pressure adjustment.
- Buyers who require an unambiguous, verified cutting-thickness rating without first confirming the applicable voltage and operating conditions.

Customer reviews on Amazon
- 5 stars
69% 69% - 4 stars
14% 14% - 3 stars
9% 9% - 2 stars
0% 0% - 1 star
8% 8%
Customer feedback reports positive impressions of functionality, quality and value, including a report of cutting 1/4-inch steel on 110V. For buyers considering the listing's voltage-dependent cutting claims, that account offers context but does not establish a general capacity. Aggregate ratings are mostly five-star, with a smaller one-star share, so opinions are not uniformly positive.
Positive themes
- Customer feedback describes the cutter as effective and recommends it.
- Feedback mentions perceived quality and value for money.
Frequently asked questions
Does the CUT55P V2 include an air compressor?
No compressor is identified as included, and the listing says it must be purchased separately. The cutter requires dry compressed air.
What cutting thickness does the listing claim?
It recommends 1/2” (12mm) at 110V and 3/4” (18mm) at 220V under stated current and air-pressure conditions, but the package text and air-pressure details conflict. Confirm the intended operating requirements before buying.
Can it start an arc without touching the metal?
The listing describes its HF pilot arc as a non-touch starting mode, intended for surfaces such as rusted, painted or dirty metal.
What does the display show?
The listing says the LED display shows air pressure, voltage and current, and can show an error code if the cutter cannot work.

Alternative options

Bestarc 50A Plasma Cutter Machine, Pilot Arc, IGBT 110V/220V Dual Voltage | 1/2" Clean Cut, 2/3" Max Cut, Large Led Display, Mesh Cut, PA/PT, 2T/4T, Painted Metal, Air Sensor, For Home DIY
$139.99

ARCCAPTAIN iControl CUT60 Pro Plasma Cutter Machine, 60 Amp, 120/240V | APP Control, 5/8" Clean Cut 15/16" Max Cut, Rust Removal, Expanded Metal, 1/4 NPT Fitting, LED Display, 2T/4T, PA/PT, MCU 3.0
$313.46

Bestarc Plasma Cutter Machine, Pilot Arc BTC500 Pro, 50A IGBT 110V/220V | APP Control,1/2" Clean Cut 3/4" Max Cut, Inverter Metal Cutter, 2T/4T Rust Removal, 1/4 NPT Fitting, for Beginners Home DIY
$189.98

Bestarc 145A MIG Welder, Flux Core/Gas MIG Stick Lift TIG Welding, 110/220V | Synergy Control, 4-in-1 Welding, Clear LED, Gas/Gasless Welding, 2T/4T, IGBT Inverter for Beginner DIY, Garage & Workshop
$121.12

ARCCAPTAIN 55A Plasma Cutter Machine, Non-Touch Pilot Arc, 120V/240V | 3/4" Max Cut, 1/2" Clean Cut, 2T/4T, HF Pilot Arc, DC Inverter IGBT, Clean Cuts on Rusty or Dirty Metal, For Home DIY
$199.47

ARCCAPTAIN 165A MIG Welder 110V 220V 4-in-1 Gasless Gas MIG Stick Lift TIG | Clear Dispaly, Beginner Friendly, Synergy Control, 2T 4T, IGBT Inverter, Wire Feed Welder, Home Repair, DIY Metalworking Tool
$179.99

LOTOS MIG225SP MIG Welder with Aluminum Spool Gun, 225A 110/220V, 6 in 1 Gas MIG, Spool Aluminum, Gasless Flux Core, Stick, Lift TIG, Spot, Multi Process Welding Machine Auto Synergistic Setting
$403.71

Bestarc 50A Non-HF CNC Plasma Cutter, Blow Back Pilot Arc, Large LED | 110V/220V Dual Voltage, 5/8" Clean Cut 1" Max Cut, Post Flow, 2T/4T, Air Sensor for Beginners DIY
$249.99

Bestarc 50A Pilot Arc Plasma Cutter, Grid Cut, IGBT 110/220V Dual Voltage | 1/2 Clean Cut 3/4" Max Cut, Large LED Display with Air Sensor, Post Flow, 2T/4T Mode, Metal Cutter for DIY Home Beginner
$135.99

Plasma Cutter Machine, Shimmer welden CUT50D, 50A 110V/220V Dual Voltage, High Freq...
$169.90

SILATU 75A Plasma Cutter Machine, Non-Touch Pilot Arc, 110/220V, LED Screen | 1'' Max Cut, 5/8'' Clean Cut, IGBT Inverter, Air Pressure Monitor, 2T/4T, PA/PT for Home DIY, Cutting on Rusty, Dirty Metal
$239.99

Bestarc 50A Plasma Cutter Machine, 110/220V Dual Voltage, Large LED Display | 2/3" Max Cut, 1/2" Clean Cut, 2T/4T, Adjustable Post Flow, 1/4" NPT Air Fitting, Smart Fan, IGBT Inverter, Portable for DIY
$99.99