Good Deal PicksDeals for the United States
BlogSearch
Product guide

ygybeyond RD-1000 DMX512 Recorder and Playback

The ygybeyond RD-1000 DMX512 Recorder and Playback unit records lighting sequences from an existing 512- or 1024-channel DMX controller to an SD card. It is a recorder and playback device, not a fader console, so it suits setups that already have a controller and need to replay stored shows.

At a glance

  • Captures real-time sequences from an existing 512- or 1024-channel DMX controller for later playback.
  • Offers loop, timer, and manual playback, with REC, LOOP, and BLACK OUT buttons.
  • The listing says an 8GB SD card is included and supports cards up to 32GB, but limits each card to 12 DMX files.
  • 3-pin XLR input and output, an LCD for checking files, and a claimed 19-inch 1U rack format are described.
Price
$95.96

Price checked: Nov 18, 2026

View offer

Pros and cons

Pros

  • Provides repeat playback options for stored lighting sequences without presenting itself as a replacement for a fader console.
  • A stated 12-file limit makes the per-card storage ceiling clear, and the LCD is described as supporting quick file checks.
  • Dedicated recording, looping, and blackout controls are specified.

Cons

  • Each SD card is limited to 12 DMX files, which may constrain users who need to keep more sequences available on one card.
  • Playback will not start if a DMX input signal is present at the DMX IN port.

Technical specifications

21 specifications
Identity
Brandygybeyond
ModelDMX 1000
Part numberRD-1000
Recording and playback
Compatible controller channel counts512 or 1024
Storage formatSD card
Maximum DMX files per card12
Included SD card capacity8GB
Maximum supported SD card capacity32GB
Playback modesendless loop, timer, and manual
ControlsREC, LOOP, and BLACK OUT
Connections and signal
DMX connectors3-pin XLR DMX input and output
Electrical isolationoptocoupler electrical isolation
Daisy-chain termination requirement110 ohm 0.25W resistor
Display
Screen technology listedLCD
Power and battery
Power configurationCorded Electric
Battery listing1 9V batteries required.
Dimensions and installation
Weight listed4.42 pounds
Package dimensions19.96 x 6.97 x 5.94 inches
Rack format claimedStandard 19-inch 1U
Materials and finish
Material listedmetal
Colorblack

What to know before buying

Listing details to confirm

For playback, the listing says there must be no DMX input signal at DMX IN. It also says the last device in a DMX daisy chain needs a 110 ohm 0.25W terminator. The listing details are inconsistent: it specifies Corded Electric power while also listing a required 9V battery, and describes 8GB SD storage as included while the explicit contents list names only the body. Confirm the selected listing and package before purchase. Firmware updates are described as using an SD card.

What’s in the box

  • BodyIncluded
  • 8GB SD cardCheck selected pack

Check which accessories are included in your selected pack before buying.

Who is it for?

A good fit for

  • Lighting operators who already use a 512- or 1024-channel DMX controller and want to record and replay sequences.
  • Mobile DJs, churches, and stage setups seeking loop, timer, or manual playback in a rack-oriented unit.

Less suited to

  • Buyers seeking a standalone fader console or a lighting controller to program shows without an existing DMX controller.
  • Users who need more than 12 DMX files stored on one SD card.
ygybeyond RD-1000 DMX512 Recorder and Playback · photo 2
Additional product photo 2

Frequently asked questions

Does the RD-1000 replace a DMX fader console?

No. The listing identifies it as a recorder and playback unit, not a fader console. It records sequences from an existing 512- or 1024-channel DMX controller.

How many lighting sequences can one SD card hold?

The listing states a maximum of 12 DMX files per card. It says an 8GB card is included and cards up to 32GB are supported.

Why might playback fail to start?

The listing says no DMX input signal can be present at the DMX IN port during playback.

What is needed at the end of a DMX daisy chain?

The listing specifies a 110 ohm 0.25W resistor on the last device in the chain.

ygybeyond RD-1000 DMX512 Recorder and Playback · photo 3
Additional product photo 3

Alternative options

Product details in Markdown