Good Deal PicksDeals for the United States
BlogSearch
Product guide

SWANSOFT No.1000 Mechanical Watch Timegrapher

SWANSOFT No.1000 is a mechanical-watch timegrapher that displays rate deviation, amplitude, and beat error for watch checks and adjustment work. It is limited to mechanical watches, and the listing says ordinary movements suit the basic model while certain high-end movements may require manual information entry or an advanced model.

At a glance

  • Automatically calculates rate, amplitude, and beat error and displays readings in real time, according to the listing.
  • Supports six measurement positions, with manual selection available for special beats.
  • The listing specifies a lift-angle setting range and a stated amplitude range.
Price
$151.30Save 15%

Reference price: $178.00

Price checked: Nov 19, 2026

View offer

Pros and cons

Pros

  • Combines three core timing measurements in one instrument.
  • Six-position testing can help compare a mechanical watch in different orientations.
  • Customer feedback reports straightforward setup and usefulness for checking multiple watches.

Cons

  • Quartz and other non-mechanical watches are not supported.
  • The listing recommends an advanced model for some high-end movements, which may require manual movement information on this basic model.

Technical specifications

10 specifications
Identity
BrandChainda
Measurements and settings
Measurement functionsRate deviation, amplitude, beat error
Amplitude resolution and rangeresolution is1°, measuring range:100° to 360° (the lift angle can affect the amplitude, range: 30°to 70°.Under normal circumstances, the amplitude value do not exceed 330°.)
Measurement positions1-6 position.
Lift angle settingbetween 30°and 70°
Beat selectionFor the conventional beat, the watch timing tester can automatically response; for the special beat, it can manually select.
Power and environment
Supply voltagesingle-phase AC 100 V~240V ± 10% two-line
Working environment0 ℃ to 50 ℃, relative humidity: 0 to 80% RH
Physical details
Package dimensions and weight9.41 x 8.15 x 6.81 inches; 2.8 pounds
Model numberNo.1000

What to know before buying

  • Use only with fully wound mechanical watches. The listing recommends a watch swing angle of 220° ~ 320° and advises testing away from potential noise or radiation sources that could interfere with pickup signals. It also says high-end movements such as Omega Co-Axial 2500/8500 may need movement information entered manually and recommends advanced models. The listed model identity appears as SWANSOFT No.1000, but the manufacturer field says Chainda, so confirm branding and selected model details before purchase.

Who is it for?

A good fit for

  • Watchmakers and repair technicians checking rate deviation, amplitude, and beat error on mechanical watches.
  • Mechanical-watch enthusiasts who want a bench instrument for comparing readings across several positions.

Less suited to

  • Quartz-watch owners or anyone needing a tester for non-mechanical watches.
  • Buyers needing an advanced model for high-end movements without manual setup.
SWANSOFT No.1000 Mechanical Watch Timegrapher · photo 2
Additional product photo 2

Customer reviews on Amazon

4.7 / 5 · 283 ratings
  • 5 stars85%85%
  • 4 stars8%8%
  • 3 stars3%3%
  • 2 stars1%1%
  • 1 star3%3%

Customer feedback describes the tester as useful and easy to set up, with positive comments on functionality and timekeeping checks, including checking several watches in a few minutes. This aligns with its listed rate, amplitude, and beat-error measurements, but those capabilities are manufacturer claims rather than independently verified results. Feedback also criticizes the manual as sparse, so buyers who are new to timegraphers may need to allow time to learn the settings.

Positive themes

  • Customers report useful functionality, easy setup, and helpful timekeeping checks.
  • Feedback includes reports of checking several watches in a few minutes.

Negative themes

  • Customer feedback criticizes the instruction manual as sparse.

Frequently asked questions

What watches can the No.1000 test?

The listing says it is for fully wound mechanical watches only. Quartz and other non-mechanical watches are not supported.

What measurements does it provide?

The listing says it calculates rate deviation, amplitude, and beat error, with readings displayed in real time.

Can it test a watch in different positions?

The listed measurement positions are 1-6, allowing readings in multiple positions.

Is it suitable for every high-end mechanical movement?

Not necessarily. The listing says some high-end movements may require manual movement information and recommends advanced models for those cases.

SWANSOFT No.1000 Mechanical Watch Timegrapher · photo 3
Additional product photo 3

Alternative options

Product details in Markdown