Good Deal PicksDeals for the United States
BlogSearch
Product guide

STUDTREX TrailV2 2-Bike Hitch Rack with Ramp, 170-Pound Capacity

STUDTREX TrailV2 is a two-bike hitch rack with a loading ramp, tilt and fold functions, and a stated 170-pound total capacity. Its 2-inch receiver requirement and claimed limits for tire width and wheelbase make vehicle and bike fit worth confirming before purchase.

At a glance

  • Removable ramp is described for rolling bikes onto the rack, which may ease loading heavier e-bikes.
  • Tilt function is intended to provide trunk access without removing the rack, and the rack folds for stowing.
  • Listing claims a 170-pound total load, stated as 85 pounds per bike, with tire width up to 5.0 inches and wheelbase up to 50 inches.
  • A keyed hitch pin, two wheel clamp locks, padded clamps, wheel-holder straps, and a hitch tightener are listed.
Price
$242.24Save 19%

Reference price: $299.99

Price checked: Nov 19, 2026

View offer

Pros and cons

Pros

  • Ramp and rolling-load design can reduce the need to lift bikes onto the carrier.
  • Tilt and fold functions address rear access and storage when the rack is not carrying bikes.
  • A listed hitch tightener and protective padding offer practical stability and contact-protection features.

Cons

  • The rack itself is listed at 54 pounds, a substantial item to handle when installing or removing it.
  • The 170-pound total capacity is divided into a stated maximum of 85 pounds per bike, so two heavier e-bikes may exceed the per-bike limit even if their combined weight is within the total.

Technical specifications

17 specifications
Identity
BrandSTUDTREX
ModelTrailV2
Capacity and compatibility
Load capacity170 Pounds
Bikes supportedup to two bikes
Capacity per bike85lbs per bike
Receiver size2-Inch hitch receiver
Maximum tire width5.0" wide
Maximum wheelbase50"
Compatible vehicle typesCar, RV, SUV, Trailer, Truck, Van
Dimensions and installation
Mounting typeHitch Receiver
Dimensions listed53.14 x 35.4 x 42.13 inches
Weight listed54 pounds
Materials and finish
MaterialAlloy Steel
ColorBlack
Functions and protection
Loading aidRemovable, anti-slip bike ramp
Access and storageTilt feature provides trunk access without removing the rack, and the foldable design makes stowing easy.
Locking and stability featureskeyed hitch pin and two integrated wheel clamp locks

What to know before buying

  • Confirm the vehicle has a 2-inch receiver and check each bike against both the stated 85-pound per-bike limit and the 50-inch wheelbase and 5.0-inch tire-width limits. The rack is listed as 54 pounds, which also adds to the load carried by the hitch.

What’s in the box

Included
  • Bike rack
  • Hitch pin lock
  • Hitch tightener
  • User manual
  • Ramp

Who is it for?

A good fit for

  • Riders who want a ramp to roll heavier bikes onto a two-bike hitch carrier.
  • Buyers with a compatible 2-inch receiver who need tilt access and a rack that folds for storage.
  • Owners whose bikes fit the stated per-bike weight, tire-width, and wheelbase limits.

Less suited to

  • Bikes heavier than the stated 85-pound per-bike limit or exceeding the listed tire-width or wheelbase limits.
  • Vehicles without a 2-inch hitch receiver.
  • Buyers seeking a lightweight rack to install or remove frequently.
STUDTREX TrailV2 2-Bike Hitch Rack with Ramp, 170-Pound Capacity · photo 2
Additional product photo 2

Customer reviews on Amazon

4.1 / 5 · 107 ratings
  • 5 stars56%56%
  • 4 stars20%20%
  • 3 stars10%10%
  • 2 stars5%5%
  • 1 star9%9%

Customer feedback describes the rack as sturdy and easy to assemble, with positive comments about performance, capacity, and built-in locks. Other feedback is mixed on secure fit and adjustability, including a report that the arms take force to pivot and a concern about the hitch-tightening lock arrangement. For buyers carrying e-bikes, those experiences make careful setup and checking the fit important alongside the listing’s stated per-bike and total weight limits. Aggregate ratings are generally favorable but include a meaningful range of lower ratings, and they do not establish why individual customers rated it as they did.

Positive themes

  • Customers describe the rack as sturdy and easy to assemble.
  • Feedback praises its performance and built-in locks.

Mixed feedback

  • Customer feedback is mixed on secure fit and adjustability, with some reporting concern about the hitch-tightening lock setup.
  • One reported experience says the arms require force to pivot.

Frequently asked questions

How much weight can the TrailV2 carry?

The listing states 170 pounds total and a maximum of 85 pounds per bike. Check each bike's weight as well as the combined load.

What hitch receiver does this rack require?

The listing specifies a 2-inch hitch receiver. Confirm your vehicle's receiver size before buying.

What bike dimensions does the listing support?

It claims compatibility with tires up to 5.0 inches wide and a maximum wheelbase of 50 inches.

Does the rack include a ramp?

The manufacturer’s included-components list names a ramp, and the feature description calls it removable and anti-slip.

STUDTREX TrailV2 2-Bike Hitch Rack with Ramp, 170-Pound Capacity · photo 3
Additional product photo 3

Alternative options

Products with discounts that might interest you

4.5
Calmara Y34 Portable Tire Inflator, 150 PSI
Calmara Y34 Portable Tire Inflator, 150 PSI

$35.99

$34.18

-5%
-5%
Product details in Markdown