1 / 6Shirbly RM-202F 2/0 AWG Battery Cable Pair, 2 ft Each
Each: Shirbly RM-202F battery cables are a red-and-black 2/0 AWG pair with pre-crimped 3/8-inch terminals, intended for short battery, inverter, and welding connections. The listing describes copper conductors, flexible insulation, and a 600-volt rating, but buyers should confirm fit and electrical suitability for their installation.
At a glance
- Pre-crimped 3/8-inch (M10) round-hole terminals are specified at both ends of each cable.
- Listing describes a fully annealed copper conductor with 2147 strands and flexible EPDM insulation.
- Red and black leads are listed at 2 feet each, suitable for compact wiring runs when that length and terminal fit are appropriate.
Often bought together
Pros and cons
Pros
- Pre-installed terminals reduce the need to crimp cable lugs during installation.
- The red-and-black, two-length arrangement can make polarity identification straightforward.
- The listing describes the cable as flexible and gives an operating temperature range.
Cons
- At 2 feet per lead, cable length may not suit installations requiring a longer route.
Technical specifications
11 specifications| Brand | Shirbly |
|---|---|
| Model | RM-202F |
| Material listed | Copper |
|---|---|
| Size | 2/0 AWG |
| Length and color | 2 FT Black + 2 FT Red |
| Strand count | 2147 |
| Number of wires | 1 |
| Terminal size | 3/8" (M10) |
|---|---|
| Voltage rating | 600 volts |
| Insulation | EPDM rubber insulation sheath |
|---|---|
| Temperature range | -58°F to +221°F(-50°C to +105°C) |
What to know before buying
Listing details to confirm
Listing details are inconsistent about whether the cable conductor and lugs are tinned: one description calls the conductor pure copper and lugs tin-coated, while another says both wire and terminals are untinned copper. The title's OFC claim and listing material fields do not independently establish copper grade. Verify the conductor and lug finish if these distinctions matter.
Who is it for?
A good fit for
- Short battery or inverter connections where 2/0 AWG cable and 3/8-inch terminals match the system requirements.
- Automotive, RV, small solar, or welding installations that need a red-and-black pair with factory-installed terminals.
Less suited to
- Installations needing leads longer than 2 feet each or terminal holes other than 3/8 inch.
- Buyers who require independently verified conductor purity, current capacity, or installation suitability, which the supplied listing details do not establish.

Customer reviews on Amazon
- 5 stars
87% 87% - 4 stars
9% 9% - 3 stars
2% 2% - 2 stars
1% 1% - 1 star
1% 1%
Customer feedback describes the cable as heavy-duty and well-made, and reports that it works for its intended purpose. That aligns with the listing's short, terminal-equipped 2/0 AWG cable configuration, but does not establish electrical suitability for a specific system. Ratings are largely five-star, with some lower ratings, and do not explain the reasons for those ratings.
Positive themes
- Customers describe the cable as heavy-duty and well-made.
- Customer feedback reports that it works for its intended purpose.
Frequently asked questions
How long are the cables?
The listing specifies one 2-foot black cable and one 2-foot red cable.
Are terminals attached?
Yes. The listing says each cable has pre-crimped 3/8-inch (M10) terminals at both ends.
Is the conductor tinned copper?
The listing gives conflicting descriptions: it calls the conductor pure copper in some places and says it is not tinned copper elsewhere. Check the specific listing details if the finish matters.
What voltage rating is listed?
The product details state 600 volts. This does not by itself determine suitability for a particular circuit or installation.

Alternative options

2/0 Battery Cable 3FT, 2/0 AWG Battery Cable with 5/16" Lugs for Cars, RVs, Trucks, Motorcycles, Boats and Solar Panels
$41.12

SAFEMATE 0 Gauge Heavy Duty Jumper Cables, 20 Feet, 1000 Amp | Automotive Booster Cables for 12V & 24V Vehicles, Jump Starting Dead or Weak Batteries – Jumper Cables Kit with Carry Bag
$55.23

ECO-WORTHY 2AWG Battery Cable with 5/16'' Lug Terminals(1FT) | 12inch Cables Set, Tinned Copper Battery Inverter Cable, Compatible for Car, Truck, RV
$13.49

NOONE Heavy Duty Jumper Cables for Diesel Trucks - 1 Gauge 25 Feet extra long Booster Battery Cables with Permanent Installation kit and Quick Connect Plug for Car, SUV
$55.23

JOMGAND K25 3750A 12V Portable Jump Starter for 9.0L Gas & 7.0L Diesel | Portable Lithium Jump Pack Jumper Cables | BOOST for Dead Battery | USB/DC Charge | LED Flashlight | Smart Digital Display
$49.95

Nilight 0 Gauge 30FT 1000A Car Battery Jumper Cables Kit | Heavy Duty Booster Jump Start Cable with Storage Bag for Jump Starting Dead or Weak Batteries for Pickup Truck RV Vans SUV
$67.99

TOPDC Quick Connect Heavy Duty Jumper Cables, 1 Gauge, 30 Feet, 800A | Extra long 30 Feet jumper cables use quick connect ends and include UL-Listed clamps and a carry bag.
$67.99

2 AWG Battery Cable, Flexible Inverter Cables 3 Feet with 5/16" Terminals OFC Pure ...
$28.49

iGreely 1/0 AWG Battery Cable,Flexible 1/0 Gauge Wire Copper Welding Battery Power Inverter Cables with 3/8'' Lugs for Automotive Solar Trolling Motorcycle RV Marine Boat (Red + Black 1FT Pair)
$20.69

0 Gauge Wire 25FT Black + 25FT Red Automotive Primary Wire | Copper Clad Aluminum, ...
$45.11

4AWG Battery Cable 5FT Red & Black, Copper Ring Terminals | 4AWG pure copper weldin...
$32.79

2/0 Gauge Welding Wire,iGreely 5 Ft Black+5 Ft Red 2/0 AWG Copper Battery Cable for Automotive Solar Vehicle Rv,5pcs of 5/16""& 5pcs 3/8"" Copper Lugs Terminal Connector with Heat Shrink Tubing
$70.29

























