Good Deal PicksDeals for the United States
BlogSearch
Product guide

Polymaker Fiberon PPS-CF FM01001 1.75 mm, 500 g

FM01001: Polymaker Fiberon PPS-CF is a carbon-fiber-reinforced PPS filament for buyers considering heat-resistant printed parts. The listing specifies a 1.75 mm diameter, a 500 g spool, and printing temperatures that call for a printer capable of high nozzle heat.

At a glance

  • PPS reinforced with carbon fiber, intended for applications where heat resistance matters.
  • The listing claims heat resistance over 250°C and reports a heat deflection temperature of 252.5°C at 0.45 MPa.
  • Listed print settings are 310–350˚C at the nozzle and 80–90˚C at the bed, with speed up to 300mm/s.
  • The manufacturer describes the filament as optimized for high-speed printing and says it is dried and vacuum sealed with desiccant.
Price
$55.49Save 21%

Reference price: $69.99

Price checked: Nov 20, 2026

View offer

Often bought together

Pros and cons

Pros

  • The 1.75 mm diameter and 500 g spool size are clearly stated for matching the filament to a printer and planned print volume.
  • A stated nozzle-temperature range and bed-temperature range help buyers assess printer suitability before purchasing.
  • The listing gives a heat deflection figure and carbon-fiber content, useful reference points when comparing engineering filaments.

Cons

  • The high listed nozzle-temperature requirement limits use to printers that can reach and sustain the specified range.

Technical specifications

13 specifications
Identity
BrandPolymaker
ModelFM01001
Dimensions and installation
Weight listed0.5 kg
Filament diameter1.75 millimeters
Materials and protection
Material listedPPS-Carbon Fiber
ColorFiberon Pps-cf10 Black 0.5kg-spool
Printing and material claims
Nozzle temperature310 - 350˚C
Bed temperature80 - 90˚C
Printing speedUp to 300mm/s
Heat deflection temperatureHDT(°C) @0.45 MPa: 252.5
Bending modulusBending modulus (MPa): 4647
Carbon fiber contentWith 10% carbon fibers
Flame-retardancy claimUL94 VO (1.5mm)

What to know before buying

  • The listing claims heat resistance over 250°C and UL94 V0 flame retardancy, with a separate UL94 VO (1.5mm) notation. Treat these as listing claims and confirm the applicable test and rating for your intended use. It also recommends turning off the fan for the first layer and routing the filament through the spool's fixed hole after use.

Who is it for?

A good fit for

  • Users with a printer capable of the listed 310–350˚C nozzle range who need PPS-CF filament for heat-conscious engineering or molding-related parts.
  • Buyers who want a 1.75 mm, 500 g spool and can work within the listed bed-temperature range.

Less suited to

  • Users whose printer cannot reach the listed nozzle temperatures.
  • Buyers seeking a larger spool or a general-purpose filament for low-temperature printing.
Polymaker Fiberon PPS-CF FM01001 1.75 mm, 500 g · photo 2
Additional product photo 2

Customer reviews on Amazon

4.8 / 5 · 116 ratings
  • 5 stars90%90%
  • 4 stars6%6%
  • 3 stars1%1%
  • 2 stars1%1%
  • 1 star2%2%

Customer feedback highlights easy printability and positive impressions of the material, while reports about brittleness are mixed, with some customers saying it is not very brittle and others describing small chunks breaking off. The aggregate ratings lean strongly toward five-star ratings, but they do not explain the differing brittleness experiences. For buyers using the specified high-temperature settings, the reported ease of printing is encouraging, while handling and breakage remain worth considering.

Positive themes

  • Customers praise printability and describe the material positively.

Mixed feedback

  • Customer feedback differs on brittleness, ranging from reports that it is not very brittle to reports of small chunks breaking off.

Frequently asked questions

What printer temperatures does the listing specify?

It lists a nozzle range of 310–350˚C, a bed range of 80–90˚C, and printing speed up to 300mm/s. Check that your printer supports the temperature range.

How much filament is on the spool?

The listing identifies a 0.5 kg spool, also described in the title as 500 g.

What is the material and carbon-fiber content?

It is listed as PPS-Carbon Fiber, and the product details state that it contains 10% carbon fibers.

Is the filament claimed to resist temperatures above 250°C?

Yes. The listing claims heat resistance over 250°C and gives an HDT of 252.5 at 0.45 MPa. These are manufacturer-provided claims, not independent verification.

Polymaker Fiberon PPS-CF FM01001 1.75 mm, 500 g · photo 3
Additional product photo 3

Alternative options

Product details in Markdown