1 / 7Polymaker ABS Filament PE01033, Black, 1.75 mm, 3 kg
Polymaker ABS Filament PE01033 is a 3 kg black spool of 1.75 mm ABS aimed at functional and mechanical prints. The listing claims heat and impact resistance, but ABS printing calls for high nozzle and bed temperatures, and an enclosure is recommended to help limit warping.
At a glance
- The manufacturer describes it as a high-toughness, impact-resistant ABS intended for functional prototypes, mechanical parts, robotics, tools, fixtures and replacement parts.
- The specialty bulk-polymerized resin is claimed to produce minimal odor compared with traditional ABS resin.
- The listed Vicat softening temperature is 104°C, a stated material property rather than a guarantee for a finished part.
- An enclosed chamber is recommended, especially for larger prints, to help reduce warping.
- Keep the cooling fan off for strength and reduced warping, or use a low setting when surface quality is the priority.
Pros and cons
Pros
- A 3 kg spool provides a substantial quantity of black ABS for repeated or larger projects.
- The stated 1.75 mm diameter suits printers configured for that filament size.
- The listing gives specific temperature and drying guidance, useful when planning an ABS setup.
Cons
- ABS requires substantially higher listed nozzle and bed temperatures than many lower-temperature filament choices.
- Large parts may need an enclosure to help manage warping, adding a setup requirement.
Technical specifications
10 specifications| Brand | Polymaker |
|---|---|
| Model | PE01033 |
| Weight listed | 3 kg |
|---|---|
| Filament diameter | 1.75 millimeters |
| Material listed | Acrylonitrile Butadiene Styrene |
|---|---|
| Color | Black |
| Nozzle temperature | 245–265°C |
|---|---|
| Bed temperature | 90–100°C |
| Vicat softening temperature | 104°C |
| Drying guidance if moisture is absorbed | 70°C for approximately 6 hours |
What to know before buying
- The manufacturer recommends a PEI sheet with ABS slurry and a 90–100°C bed, with a brim, raft or slower first layer as optional ways to improve adhesion. The filament is described as vacuum-sealed with desiccant, but package contents are not otherwise specified.
Who is it for?
A good fit for
- FDM printer owners whose machines support 1.75 mm filament and the listed ABS printing temperatures.
- Makers printing functional, mechanical or replacement parts who can manage ABS's enclosure and bed-adhesion requirements.
- Buyers seeking a 3 kg quantity of black ABS for ongoing projects.
Less suited to
- Printers that cannot reach the stated nozzle or bed temperatures.
- Users who need a low-temperature, low-setup material or cannot accommodate the recommended enclosure for larger ABS parts.

Customer reviews on Amazon
- 5 stars
75% 75% - 4 stars
7% 7% - 3 stars
6% 6% - 2 stars
0% 0% - 1 star
12% 12%
Customer feedback reports positive impressions of filament quality, while durability and print quality are mixed, including reports of filament snapping at the roll and prints falling apart within hours. For buyers relying on ABS for functional or mechanical parts, those concerns make consistent feeding and finished-part reliability worth considering. Ratings lean positive overall, but the smaller pool and low-star ratings mean they do not settle those concerns.
Positive themes
- Customers report positive feedback about filament quality.
Mixed feedback
- Durability receives mixed feedback, with a report of filament snapping at the roll.
- Print quality receives mixed feedback, including a report of prints falling apart within hours.
Frequently asked questions
What printer settings does Polymaker recommend?
The listing recommends a 245–265°C nozzle, a 90–100°C bed and the cooling fan off. A low fan setting is described as an option when surface quality takes priority.
Is an enclosure needed for this ABS filament?
An enclosure is recommended to maintain a stable printing environment and help reduce warping, especially on larger parts. The listing does not say it is mandatory for every print.
How should the bed be prepared?
The listing suggests a PEI sheet with ABS slurry and a 90–100°C bed. A raft or brim, or slowing the first layer, may further improve adhesion.
What should I do if the filament has absorbed moisture?
The manufacturer advises drying it at 70°C for approximately 6 hours before printing.

Alternative options

SUNLU 3KG Filament Dryer SP2 & Storage Box, 15min Fast Heating to 70°C | Modular Design for 3D Printer Filament Drying & Sealed Storage, Compatible with 1.75mm/2.85mm PLA PETG TPU ABS ASA
$76.49

SUNLU ABS Filament 1.75mm,4 Black,4kg | 3D Printer Filament,Highly Resistant Durable,Heat Resistance,Excellent Toughness,For 99% FDM 3D Printers
$38.31

OVERTURE ABS High Strength 3D Printer Filament 1.75mm, 1kg Black | Low Warping, Excellent Durability, 1kg (2.2lbs) Dimensional Accuracy +/- 0.02mm, Fits Most FDM Printers (Black)
$15.19

Creality ABS Filament 1.75mm, Black, 2-Pack (2 kg) | Excellent Resistance, Odorless Non-Toxic, Stability, Tough, +/-0.02mm Accuracy, Compatible with Most FDM 3D Printers
$23.74

OVERTURE TPU 95A Flexible 3D Printer Filament 1.75mm, 1kg Black | High Elasticity & Durability Filament, 1kg Spool (2.2lbs), Fit Most FDM Printer (Black)
$19.03

SUNLU PLA+2.0 3D Printer Filament, Large Spool, Black, 3KG | Upgraded PLA+ Filament 1.75mm, Large 3KG Spool, Tougher & Stronger, Neatly Wound, +/-0.02mm Accuracy
$36.99