Good Deal PicksDeals for the United States
BlogSearch
Product guide

ONiLAB MX-E Mini Vortex Mixer

Mini: ONiLAB MX-E is a compact touch-start vortex mixer for mixing small containers with a press-and-release motion. Its single-speed operation and space requirement inside each tube make it better suited to small-batch paint, polish, adhesive, or laboratory mixing than to containers filled nearly to the top.

At a glance

  • Touch-start operation activates mixing under light pressure and stops when the container is lifted, according to the listing.
  • A silicone suction cup is described as helping stabilize the unit during operation.
  • The listing claims a full 50 mL container can be activated for mixing within 3 seconds, but also instructs users to leave substantial empty space in containers.
Price
$33.14Save 15%

Reference price: $38.99

Price checked: Nov 19, 2026

View offer

Often bought together

Pros and cons

Pros

  • Press-to-start operation offers a quick way to mix without a separate start control.
  • The compact footprint and listed low weight suit a bench or hobby workspace where portability matters.
  • The listing identifies uses spanning lab tubes, hobby paints, nail polish, and eyelash adhesive.

Cons

  • The touch-operated jog mode requires holding the container against the cap, so it is not described as hands-free continuous operation.
  • Mixing is limited when the container does not have enough empty space for liquid movement.

Technical specifications

10 specifications
Identity
BrandDLAB Scientific Inc
ModelMX-E
Mixing and motor
Mixing speed3000 rpm
Motor typeBrushless DC motor
Power12W
Power inputAC 100-240V ~ 50Hz/60Hz
Dimensions and installation
Dimensions listed5.2 x 5.2 x 3.1 inches
Weight listed1.32 pounds
Dimensions in specifications133×133×80mm
Operating conditions
Work environment5~40℃, relative humidity ≤80%

What to know before buying

  • Fill tubes to less than one third of their volume, leaving at least two thirds empty, as instructed by the listing. Its claimed 50 mL mixing example should be understood alongside this fill guidance.

Listing details to confirm

The listing gives two different dimensions, 5.2 x 5.2 x 3.1 inches and 133×133×80mm, and the weight is described as both item weight and shipping weight. Confirm which measurements apply to the selected listing.

Who is it for?

A good fit for

  • Hobbyists mixing small amounts of acrylic paint, lacquer, or enamel in suitable containers.
  • Users who prefer touch-activated mixing for tubes, nail polish, or eyelash adhesive.
  • Small lab or school settings needing a compact vortex mixer and able to observe the stated container-fill limits.

Less suited to

  • People seeking a mixer with a stated continuous-operation mode or hands-free use.
  • Those who need to mix containers filled close to capacity or need a documented range of adjustable speeds.
ONiLAB MX-E Mini Vortex Mixer · photo 2
Additional product photo 2

Customer reviews on Amazon

4.5 / 5 · 463 ratings
  • 5 stars74%74%
  • 4 stars14%14%
  • 3 stars6%6%
  • 2 stars2%2%
  • 1 star4%4%

Customer feedback describes good mixing results with prethinned paints and reports that some mixtures take seconds, while reliability and value receive mixed reactions. Opinions also differ on vibration and noise, and some feedback is negative about durability. For small-container hobby mixing, these perceptions are relevant, but they do not establish consistent results or confirm the listing's speed and performance claims.

Positive themes

  • Customers report solid build impressions and good performance with prethinned paints.
  • Some feedback describes quick mixing of enamels, lacquers, and acrylic paints.

Negative themes

  • Some customer feedback expresses concerns about durability.

Mixed feedback

  • Reliability and perceived value receive mixed feedback.
  • Customers differ on vibration and noise, with reports ranging from relatively quiet to somewhat noisy.

Frequently asked questions

How does the ONiLAB MX-E start and stop?

The listing describes a jog-style touch operation: apply light pressure with the container centered on the silicone cap to start, then lift it to stop.

How much liquid should a container hold?

The listing says to fill less than one third of the tube and leave at least two thirds empty so the liquid has room to mix.

Does it run continuously?

The described operating mode starts under pressure and returns to standby when the container is lifted. Continuous operation is not specified.

What are the listed dimensions?

Two different dimensions appear in the supplied listing: 5.2 x 5.2 x 3.1 inches and 133×133×80mm. Check the selected listing for the applicable measurement.

ONiLAB MX-E Mini Vortex Mixer · photo 3
Additional product photo 3

Alternative options

Product details in Markdown