Good Deal PicksDeals for the United States
BlogSearch
Product guide

Mintion V1 3D Printer Filter System for Bambu Lab P1S/X1C

Mintion V1 is a 3D printer filter system listed for Bambu Lab P1S and X1C printers. Its claimed pre-filter, H13 HEPA layer, activated carbon bed, and centrifugal fan target particles and odors from printing, while feedback is mixed on noise and fit.

At a glance

  • The listing describes three filtration stages: a pre-filter, HEPA H13 filter, and activated carbon bed.
  • Default connector is stated for Bambu Lab P1S and X1C. Other enclosed-printer compatibility depends on adapter kits or printed connectors.
  • Manufacturer claims airflow up to 60 m³/h and tool-free, quick-swap filter modules.
Price
$76.49Save 15%

Reference price: $89.99

Price checked: Nov 19, 2026

View offer

Pros and cons

Pros

  • Three listed filtration stages address larger debris, particles, and odors in one system.
  • Customers report odor reduction, straightforward installation, and positive impressions of filtration and build quality.

Cons

  • Noise and fit draw mixed customer feedback, so suitability may depend on placement and the specific printer setup.

Technical specifications

7 specifications
Identity
BrandMintion
Dimensions and installation
Dimensions listed5.3 x 5.3 x 5.7 inches
Weight listed3.59 pounds
Filtration and airflow
Filter stagesPre-Filter->HEPA H13 Filter->Activated Carbon Bed
HEPA particle capture claim>99.97% of ultrafine particles (UFPs) down to 0.3µm
Maximum airflow claimup to 60 m³/h
Outlet air velocity claimup to 10 m/s

What to know before buying

Listing details to confirm

The >99.97% particle-capture figure, airflow, air velocity, and reduction claims are manufacturer statements, not independently verified here. The listing gives a roughly three-month replacement interval for an eight-hour daily schedule, and describes different filter arrangements for PLA/PETG versus high-VOC materials. Confirm the connector and any required adapter for your printer.

Who is it for?

A good fit for

  • Bambu Lab P1S or X1C owners seeking a filtration add-on for an enclosed printer.
  • Makers printing ABS, ASA, or other materials for which the listing specifically highlights odor and VOC concerns.

Less suited to

  • Buyers who need confirmed fit for a printer other than the listed default P1S/X1C connector without sourcing or printing an adapter.
  • Anyone requiring a verified noise level or independently established filtration performance.
Mintion V1 3D Printer Filter System for Bambu Lab P1S/X1C · photo 2
Additional product photo 2

Customer reviews on Amazon

4.5 / 5 · 111 ratings
  • 5 stars73%73%
  • 4 stars18%18%
  • 3 stars3%3%
  • 2 stars2%2%
  • 1 star4%4%

Customer feedback highlights reported odor reduction, filtration, build quality, and straightforward installation, including comments about use during ABS/ASA printing. Buyers also report differing experiences with noise and fit. The positive feedback is relevant to the listed HEPA and carbon stages, but it does not independently establish the manufacturer's filtration figures, and fit comments make printer-specific connector checks worthwhile.

Positive themes

  • Customers report odor reduction and positive experiences with filtration and build quality.
  • Installation is described positively, and customers say setup is straightforward.

Mixed feedback

  • Noise reports vary, with some customers describing it as quiet and others finding it loud.
  • Fit reports are mixed, ranging from a good fit to a poor one.

Frequently asked questions

Which printers does the system connect to by default?

The listing specifies a default connector for Bambu Lab P1S and X1C. It describes other enclosed printers as requiring available adapter kits or printed connectors, so confirm the needed connection parts for your setup.

What filtration stages are listed?

The stated sequence is a pre-filter, HEPA H13 filter, and activated carbon bed. The listing also describes alternate arrangements for PLA/PETG and higher-VOC printing.

How often should the filters be replaced?

The listing suggests replacement at about three months for use averaging eight hours per day. Actual service life may vary with usage and material, and the interval is a manufacturer claim.

Mintion V1 3D Printer Filter System for Bambu Lab P1S/X1C · photo 3
Additional product photo 3

Alternative options

Product details in Markdown