Good Deal PicksDeals for the United States
BlogSearch
Product guide

ARCCAPTAIN iControl CUT55 Pro Plasma Cutter, 55A, 120V/240V

ARCCAPTAIN iControl CUT55 Pro is a dual-voltage plasma cutter listed at 55 amps, with app-based controls and a non-contact pilot arc. Its advertised cut capacity varies by input voltage and cutting mode, so match the relevant figures to your material and power supply.

At a glance

  • App control is described for adjusting parameters, monitoring status, choosing processes, and saving settings, with a stated range up to 10 meters.
  • The non-contact pilot arc is advertised for starting cuts on dirty, rusty, or coated steel without touching the workpiece.
  • A pre-installed air regulator and filter are listed, along with fault alarms and overcurrent, overvoltage, overload, and overheating protection claims.
  • 2T and 4T trigger modes are offered, with automatic post-blow durations tied to current ranges.
Price
$256.46Save 31%

Reference price: $369.99

Price checked: Nov 20, 2026

View offer

Often bought together

Pros and cons

Pros

  • The listing gives separate clean-cut and maximum-cut figures for 120V and 240V, which helps buyers compare against their intended supply.
  • App adjustments and monitoring may be useful when settings need to be changed or checked away from the machine.
  • A non-contact pilot arc is suited to starting on surfaces with rust, dirt, or coatings, according to the listing.

Cons

  • The advertised cut capacity changes substantially with voltage and whether the figure is for a clean or maximum cut, so the headline maximum does not describe every setup.

Technical specifications

20 specifications
Identity
BrandARCCAPTAIN
ModelCUT55 Pro
Rated current in title55Amp
Input voltage in title120V/240V
Power and battery
Power configurationdc
Cutting performance claims
Quality cut thickness12mm (1/2")
Maximum cut thickness20mm (3/4")
Clean cut at 55 PSI5/16" on 120V and 1/2" on 240V
Maximum cut at 55-75 PSI1/2" on 120V and up to 3/4" on 240V
Operating features
Arc starthigh frequency non-touch arc starting mode
App control rangeup to 10 meters away
Torch modes2T/4T
Post-blow by currentCutting current 20-34A, post-blow time 5s; Cutting current 35-45A, post-blow time 8s; Cutting current 46-55A, post-blow time 10s.
Air pressure for clean cut claim55 PSI
Air pressure for maximum cut claim55-75 PSI
Dimensions and installation
Weight listed19.41 pounds
Package dimensions19.5 x 15.5 x 8 inches
Materials and protection
Material listedIron
Other listed details
Part numberCut55
Warranty description3-YEAR

What to know before buying

Listing details to confirm

Cutting claims differ by stated purpose and input: clean-cut figures are 5/16" at 120V and 1/2" at 240V, while maximum-cut figures are 1/2" and up to 3/4" respectively. Another feature claim gives 12mm (1/2") quality and 20mm (3/4") maximum without specifying voltage, so use the voltage-specific figures when planning a job. The app description says post-blow settings can be adjusted, but the feature text gives 5s, 8s, and 10s by current while another listing section gives 5s, 10s, and 15s. Confirm the applicable settings and your required supply before purchase.

What’s in the box

Included
  • 1x 10FT AG60 Cutting Torch
  • 1x 10FT Air Hose
  • 1x 10FT Earth Clamp
  • Power adapter
  • 1x ARCCAPTAIN Plasma Cutter

Who is it for?

A good fit for

  • Metalworkers who need a 120V/240V plasma cutter and can select capacity based on voltage-specific cut claims.
  • Users who value app-based parameter adjustment and status monitoring.
  • Buyers cutting rusty, dirty, or coated material who may benefit from a non-contact pilot arc.

Less suited to

  • Buyers who need one unconditional cut-capacity figure across both input voltages or materials.
ARCCAPTAIN iControl CUT55 Pro Plasma Cutter, 55A, 120V/240V · photo 2
Additional product photo 2

Customer reviews on Amazon

4.4 / 5 · 572 ratings
  • 5 stars74%74%
  • 4 stars12%12%
  • 3 stars4%4%
  • 2 stars4%4%
  • 1 star6%6%

Customer feedback highlights cutting performance, ease of setup, and use on 110V, with reported cutting up to 3/4 inch. That maximum should be read alongside the listing's voltage-specific figures, which distinguish clean cuts from maximum cuts. Feedback also includes mixed durability impressions, including reports of capacitor issues, so long-term reliability is less consistently praised than operation and setup.

Positive themes

  • Customers are reported to appreciate cutting performance, ease of use, and setup.

Negative themes

  • Durability feedback is mixed, with some customer reports mentioning capacitor issues.

Mixed feedback

  • Some customers describe performance and durability positively, while others report concerns about durability.

Frequently asked questions

What cut thickness does the CUT55 Pro claim?

The listing gives clean-cut claims of 5/16" on 120V and 1/2" on 240V. Maximum-cut claims are 1/2" on 120V and up to 3/4" on 240V. These figures are listing claims, not independently verified results.

Does it have a pilot arc?

Yes. The listing describes a high-frequency, non-touch pilot arc intended to start without contacting the workpiece, including on dirty, rusty, or coated surfaces.

Can it be controlled from a phone?

The listing describes app control for adjusting parameters, monitoring status, selecting processes, and saving settings, with operation stated up to 10 meters away.

What post-blow time should I expect?

The feature text lists 5, 8, and 10 seconds across increasing current ranges, while another product section lists 5, 10, and 15 seconds. Confirm the applicable settings for the selected unit.

ARCCAPTAIN iControl CUT55 Pro Plasma Cutter, 55A, 120V/240V · photo 3
Additional product photo 3

Alternative options

Product details in Markdown